You have a PROBLEM if you have this Silverado part (2019-2021 Silverado) 

The reason I I love this channel cause you always do your own work not like other channels. Keep up the good work!

So happy with my 21 Custom Trail Boss. No active fuel management, no shutters, and no auto start/stop.

I had the same issue, had to take my Stillen to a mastertech who modified it. Had to shave/sand it down so the shutters wouldn't hit it. About 8 months ago and no issues.

This video is a life saver. I was loosing my mind trying to figure out where the sound was coming from. Getting my jig saw out tomorrow. STILLEN should stand behind their product.

I guess no one read the disclaimer on Stillen's website about not working with the active shutters: *NOTE: THAT THIS INTAKE SCOOP WILL NOT WORK WITH VEHICLES EQUIPPED WITH RADIATOR BLOCK OFF PLATE SYSTEMS.

Rocking that US General box and tool cart with no complaints. I have a overloaded the drawers with no issues. Harbor Freight FTW. I see zero need for tool truck boxes at this point.

I am impressed with the Husky toolboxes. I have a 60" lower and love it. Also, with your new wheels and tires setup, be prepared for some clearance issues depending on offset. May have some trimming. Can't wait to see the lift on it. Makes a world of difference.

So cute when your son helps you!

Thanks Much! The bouncy ball noise was driving me nuts on the 2020 Chev Silverado Cut an inch off the Stillen NOW NO NOISE ! You Da Man !

Stillen needs to send you a check for doing their R&D work.

I work out of my tool box every day as a semi technician. I swapped my snap on tool box with a US General from Harbor Freight. I upgraded the size and it was about 12k cheaper than the big name boxes. My box is the 72" and have no complaints. I chose to do this because the box is not being rolled around from one side of the shop to the other, it sits still.

Almost every mod you have done. On your trailboss I have done. Waiting to purchase the pulsar next. Thank you for going through the trials for us. Much love

The dealership did the exact same thing with my oil filter, and I was like, “why tf is my 21 leaking oil?”, and was able to twist my filter by hand 🤦🏼‍♂️

I bought my tool chest from Strictly Tools. I love their heavy gauge steel used in the construction. Great quality. I ordered the all black Tool Vault Elite XL, with hutch and 2 side lockers. I have had it for roughly 4 months now, I am still filling it with tool, detailing and garden equipment. I am currently adding power strips, lights, power stations. Great video.

Olight's rock...Jack loves them and we have easily 30 or 40 of them (keep buying more on their flash sales...not that we need anymore). I recommend getting your sons one or two of the OBulbs. They are perfect for toddlers (Jack has the entire collection) especially for bedtime reading and fun in the bath (since they float)!

Thank you for this! I freaking knew it was the shutters contacting the scoop! Freaking Stillen!

Welcome to the "Buy once, Cry once" club. Buying better quality devices/tools in the beginning may cost you more today, but replacing lower quality devices and tools over time will end up costing you more. Oh, and those flaps inside the grill definitely work. It is like NASCAR/NASTRUCK adding tape to the outside of the grills when they pit. So, even though the truck is lifted, every little bit definitely helps.

Good call giving the dealer the middle finger on oil changes. I just started noticing an oil leak in my driveway where I park my truck. Went under the truck and found the oil filter was leaking. Cleaned the filter off, the twisted it with my hand. It was loose. Got a wrench and tightened it. Dealership did my last oil change. They got me with the good price.

I have that same Husky toolbox you were looking at. It’s well built and lots of useful storage. I decided on that after looking at Lowe’s and Harbor Freight boxes. It seems to be best bang for buck.

You had me worried, I thought you were running into lifter failure issues. Keeping my fingers crossed that I don’t run into this problem with the Stillen Intake, but I will be looking at it before my next drive just to be safe. Keep up the good work, can’t wait to see this lift, and Fuel off-road setup (just a guess)! 🤙🏻

I like your attitude " I'm going to do this because I can! "

I waited for one of the frequent Harbor Freight sales and picked up 2 of their 72" US General toolboxes. Hard to beat for the money really. Wife picked up a smaller Husky box with wood top for furniture painting supplies and what not and it's pretty nice as well.

Thanks for showing the noise and how to fix it. I have the same thing going on and will get it fixed easily thanks to your help!

You will love that Husky toolbox, I have the same one and glad I pulled the trigger on it. Have it delivered, trust me.

I got lucky I just got a 2021 Silverado LT with out the DFM so happy for that thanks to his videos I looked at the sticker before I bought the truck big win chevy is funny you get a $50 credit just for not having a DFM

You should of never let the camera man join a union, he seems to have gotten s little lazy with his shooting. 😂

I really like my Husky tool box, the quality seems decent and it wasn't super expensive. I have heard good reviews on the US General brand at Harbor Freight. Great video.

My last job bought me the husky 52" box. Loved it, unfortunately, couldn't take it with me when I left. Tons of room, quality box. Currently using a 42" husky I bought myself for work. Husky is the best bang for the buck for toolboxes.

Awesome video as always Hawaiian, keep it up mahalo🤙🏽🤙🏽

this is awesome! I thank you so much for uploading this vid addressing the issue with the Stillen. I myself have that issue for close to a year. i never thought it would be this. I will now be able to fix it! the dealer couldn't find the issue after having my truck for 2 days. its funny/traumatizing when i heard the same sound as you were driving off in your video. subscribed! also, I too, have the AVS hood deflector. makes our trucks stand out!

Glad it wasn't the Pulsar LT! Mine is running excellent...except I "thought" I turned off the speed limiter. The truck hit the 98 mph limiter on a recent trip to Arkansas. 2021 GMC Sierra AT4 (6.2L)

I love my Olight flashlights! I can't believe Stillen missed that in R&D. That's why I stick with K&N filters cold air intake.

This is my new favorite channel, great job keep it up

I’m pumped or this lift video, going to be doing one soon and what to see what’s in store

I'm getting that tool box 🤣 Everytime I go to home Depot I look at it. I also use the k&n oil filter 👌 For oil I switched from mobile to royal purple 10w 30 for my sierra. And I need an olight for my Glock. Can't wait for next video.

Kobalt toolboxes are fantastic. I've got a Kobalt box that looks like its the same size as the large Husky box you really liked in this video and it is awesome. It has the soft close drawers, integrated power strip, etc. I even have the Kobalt toolset that comes with the foam in-lays that sit in the drawers to keep the tools nice and organized.

The best filter oil filters (as tested by MIT) is wix brand. Napa filters are usually made by wiz.

Thanks for this video, I had no idea and that the shutters closed so early. I wish I would have known then I would have realized thats where the noise was coming from. I will do this to my Stillen.

Absolutely love my OLights! Awesome sponsor to have!

Look at wix xp filter for next oil change

There is secret way to obtain a discount off Home Depot tool boxes. Since it’s a display. It’s been touched and played with. You can question them about it and they’ll break a couple bucks off.

Stillen needs to update their design so that it doesn't rub.

The Husky is a good box. Just be sure to get the deep one and not shallow one like the red ones

Bro!! Your videos are legit! That time lapse of the custom table for the vice was awesome! Keep up the great content! I have a 2021 Tahoe RST, how you like your Air Inductions Intake?!

Apparently Stillen didn’t do enough R&D, oem it is. I’m still bummed my lifters failed at 6 k miles and I had installed the Pulsar LT.

I had the same problem with the dealer not tightening my filter as well!

It’s the shutters opening and closing… they are rubbing. I just sprayed a little wd40 in the hinges where the shutters rotate, and solved the problem.

Has this product had any performance impact at all? I guess my question is, is it worth the trouble of having to customize it to make it fit/worth?

I love your channel bro bought a 21 Silverado trail boss and I love your ideas im gonna steal them sorry not sorry haha by the way odd request I like your music choices you have like a spotify playlist we can check out if we want these songs or like a description of the song you play would be awesome thanks! happy New Years and hope family is well

Looking for a setup for my 2019 but need to know more I know your next vid is gonna be great!

If you are looking for a budget toolbox, then Husky is a decent one to look at. However, step up a bit and pay a little more for a Milwaukee box, or even a Tekton box, although those are a bit pricey by comparison. Or if you have a Costco membership. look at their offerings online or in the nearest store. They have stepped up their game when it comes to better quality toolboxes. The Torin brand seemed to be a better quality than some of the lower end Trinity stainless offerings. Although they do have two newer ones from the Trinity that have thicker steel and even one with an adjustable height work bench. Definitely worth looking at, and if you buy it and it falls apart, it is from Costco, so you can take it back.

I was thinking: Technically, you could "write off" YT income or "business expenses" related to (being filmed in) your videos. Smart man. A typical "business expense" could be a new supercharger for the Trail Boss I would presume :)

That vice mount is cool.

Lol I noticed these shutters on my fathers LT. I have the Custom Trail Boss and it doesn’t have those, made for installing my light bar a breeze

Bro, your brows are on fleek!

Another good video it sucks you spent all that money but had to cut it up. Stillen should be refunding people for that. The fact that you took the time to figure out the issue is why the world needs us car guys when other people would just take it back.

If you want too spend big money get the snap-on if not the new craftsman makes the job

Absolutely love the content! Keep it up!!

Just bought my 2020 trail boss yesterday. Went to the beach were my overland bradas 🤙🏾camping. Tried the 4x4 at sand and she handled it like one chanp. Went back were my friends at hang out for couple of hours then tried my remote start it didn't work so i unlock the door press the brake then the start button, it didn't do anything. We thought its the remote battery so we replaced it with a new one and still didn't work. We tried jumping the battery and it didn't work. So we decided to unplug the positive and negative thermals, we waited for 20minutes i tried again to use remote start and it works. So i jump in the truck pressed the brake and the start button and it didn't do anything again. I rev the engine but the rpm doesn't move and the gauges in the cluster has no light and it in an off position. After a few minutes the truck turned off. I tried again to use the start button and it doesn't even have lights and only the radio was work. We had the truck battery check and it is good. Would you have any idea why its not starting or anyone here has any advice?? I had to get my truck towed to my dads house🤦🏽‍♂️😤

I've always wondered who the artist is you have played in your videos all the time? I really dig their music!

Great video as always. What is the music you play during the video? Thanks for all the knowledge you pass on.

I have the 60" husky, great combo box, great xmas sale price at 499.00. You will like it

Harbor freight tool boxes it’s worth a look

That 52” husky is a great box. I have the 56” heavy duty husky box and love it. Is it perfect? No, but hard to go wrong for the price.

Love the trail boss content! Glad my custom doesn’t have those aerodynamic shutters.

Ah gawd.Well good thing you isolated it.

Hey LH when your were trouble shooting the knocking noise you did process of elimination. You showed your Pulsar LT in your hand ! Has it been eliminated and not used anymore ??? I thought I heard you say it created a fault ! Is it history ??? Thanks I was thinking of buying the Pulsar LT and if it’s a problem I’m out !!!

I'd recommend the US General 44 or 56 inch from harbor freight

Seems like Stillen needs to fix their issue with this

Stillen should fix that issue

Delivery man looks like Opie from SOA

I’m at 14:37 and guessing those shutters are hanging up on the stolen piece. FYI my Dmax has those shutters!

So, will Stillen be recalling these things? Or maybe issuing an update warning Trail Boss owners..

Get a boxo fully stocked with the cutouts

When you change the wheels, are thinking of doing a give away of the old set? I purchased a 21 Z71 but it has the silver wheels and I have been thinking of Plastic Coating them but a real set would be really sweet!

Fenix is the only flashlight brand I buy

If You want to upgrade your RC light switch 404 parts has the complete oem up fitter kit on sale for $199.00 a Great Price

Get the husky, I've had one for a few years. Been holding up well

Did you notice any performance improvement or gas mileage improvement after the Stillen install?

Harbor freight has a decent LED STICK LIGHT.

Lift and wheels , lift and wheels , lol cant wait

Hopefully u fight get a truck out of the batch with bad lifters from the factory lmfscrew brand new 6.2 trail boss blew up under 5k miles but if u got a warranty I’m sure u do ur good

Just bought a 2021 6.2 LTZ...ALSO HAVE A REGULAR CAB 2016 5.3...DONT KNOW WHICH ONE TO PUT A WHIPPLE SUPERCHARGER ON....

I did the same thing and commented on you’re first video tried to tell everyone!!!

Love the videos

Context of info good . . Talking about it . . bad!

What do you do for a living?

Stay away from Craftsman tool boxes, they are not as good as even the Husky. And don't even walk by one of the Cobalt boxes, or they'll fall apart and dent.

definitely dont wanna hear popping noises blew a lifter few days ago :’( hows the pulsar lt, thinking on getting one

I’ve been waiting for my Stillen scoop to get shipped for over 6 weeks with no response from them. After watching this I emailed Stillen and told them to cancel my order. They’re a crap company with even worse customer service.

How about changing the interior lights? I've been wanting to change mine to blue., but I can't figure out how to do it. That and the bed lights by the tailgate lol

Haha “tax write off’s. What?!” Love the videos!

Should of checked Costco!! We know you like that place lol

Was the delivery guy Vince from Red Jacket Firearms?

So has Stillon addressed this is what I am wondering

Just out of curiosity, if you don't mind sharing. What is your main occupation?

The OG needs an upgrade on the wheels and tires.

Is the truck going to still fit in the garage with the lift kit? I can't get a lifted truck in mine and I didn't want a brand new 2500 GMC Black Widow sitting outside all the time. I can barely fit my new 2021 Tahoe, it has the air suspension that I have to make sure to lower before entering the garage. When we build our new house I'll make sure to have a higher garage door and also inside celing to put a couple 4 post lifts for work & storage. Funny the lights are out of stock?

A clarification on cutting/modifying the Stillen intake. I have the same issue. You cut 1" along the length? Please advise.

Harbor freight there tools boxes are pretty good