Zero Turn Mowers greasing the caster wheel pivots SCAG (kingpins)

Подписаться 8 тыс.

Просмотров 66 тыс.

50% 1

Proper greasing of the caster wheel pivot kingpins on most zero turn mowers. Scag ships their ZT mowers with plugs in place of grease zerks in order to prevent their greasing on a frequent basis. The reason is excess grease has nowhere to go but pop the top cap off resulting in a lost cap and leaving the bearing exposed to the elements, which will eventually lock the pivot up.
Thanks for watching and work safe!

Опубликовано:

18 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@shanerogers488 24 дня назад

THANK YOU! THANK YOU! I was having such trouble with my Husqvarna zero turn, but the set-up here is exactly the same. Perfect video for what I needed!

@pmtips4482 24 дня назад

Glad it helped! Thank you for watching!

@KTHKUHNKK Год назад

That's amazing stuff The guy really didn't know what he was talking about. You learn something new everyday thank you. Keith

@Never_give_upforver 4 месяца назад

You’re the best in my opinion! You’ve answered every question about Scag cheetah mower.

@pmtips4482 4 месяца назад

Thank you for watching!

@whodahellru8124 Год назад

Great info, thanks for posting! I just had a career change and I’m serving lawn equipment. I don’t have much direction in shop so I have to find information on my own, so again thank you for posting!

@pmtips4482 Год назад

Thanks for watching! I use RU-vid every day for repairs and reviews on nearly every purchase, especially tools. Best of luck to you!

@gregggibson3109 Год назад

Thank you sir for taking the time to put this video up. I just pulled my first exhaustive PM on a Scag Tiger Cat II at the 110 hour mark (4 years of operation). This is going to be the last step I address.

@pmtips4482 Год назад

Thank you for watching and good luck with your SCAG!

@KTHKUHNKK Год назад

Good job my friend. You got to take care of them. Keith

@LouisianaTractorworks 2 года назад

My SCAG has the bolt on caps. Thanks for reminding me that I need to do that. lol It's hard some times keeping up with all the equipment. Have a good week Pm! See ya!

@pmtips4482 2 года назад

Keep her greased! Have a good one!

@mcahill135 11 месяцев назад

Excellent tutorial. Thank you

@pmtips4482 11 месяцев назад

Glad it was helpful!

@ukmerkz5031 10 месяцев назад

Love it. I will never go back to the walk...

@pmtips4482 2 года назад

Note: thread size on this is 1/4 x 28 tpi. NOT 20 tpi.

@gardnerraffa5970 Год назад

Thanks for info. I wondered why ferris does same thing. I did mine today and luckily all was good.

@pmtips4482 Год назад

Glad it helped! Thanks for watching!

@KWLawnsTS Год назад

thanks for making this video, I should've been doing this

@pmtips4482 Год назад

Thank you for watching!

@raintreelandscapingllc8648 Год назад

Thank you sir. Very helpful

@pmtips4482 Год назад

Thank you for watching!

@riclykins851 Год назад

I too have a Cheetah, this helps a lot. Thank you.

@pmtips4482 Год назад

Glad it helped!

@nathanbraun4 Год назад

Thank you so much

@pmtips4482 Год назад

You're most welcome!

@TheDisorderly1 2 года назад

I have a Ferris that has a pretty similar setup and the top cap pops off when you add grease and it never comes out the bottom either. I too found that odd. Seems to me you'd want some grease to come out the bottom to clear the dirt from the seal and its sealing surface.

@prebaned Год назад

When your caps are tight, if you do not remove them when filling with grease, the grease comes out of lower seal. Good idea to remove the caps first.

@pmtips4482 Год назад

Thanks!

@TT-dz8zf Год назад

Thanks for the video. Can you also make the next one on other greasing points? Thanks

@pmtips4482 Год назад

Do you have the owner's manual! It has all the grease points and hours on each to grease. Thank you for watching!

@prostreetcamaro 3 месяца назад

The actual reason they dont put zerk's in them is because they will get broken off. Very very vulnerable spot.

@pmtips4482 2 месяца назад

It sure is! Thanks!

@kenmaher128 Год назад

Thanks! Very helpful for a beginner. Can you reply on greasing the spindles? There's a discharge point on the opposite side of the zerk that's supposed to keep you from blowing the seals. Can I keep adding grease until it starts coming out the discharge? To try to get the old stuff out/make sure it's full? I'm a little afraid to do it.

@pmtips4482 Год назад

Ken, you can but I would go slow just in case the relief valve is stuck a little. About every 15 hours I give 5 to 6 pumps of grease. At 7 to 8 the relief valve will open and I can hear the grease escape. Thanks for watching!

@kenmaher128 Год назад

@@pmtips4482 That's just what I'll do! Sounds more cautious than pumping away waiting for the stuff to come out the relief valve!

@bextar6365 Год назад

My residential Z-Turn mower does not have Zerk fittings on either side so I guess that I must pop the cover off to grease the kingpins ?

@pmtips4482 Год назад

Maybe not. If there are no zerks, they are more than likely sealed bearings or graphite/oil impregnated bronze bushings. It's best to check your OM. Thanks!

@goodboyringo9716 18 дней назад

My scag Turf Tiger came with grease fittings not plugs

@pmtips4482 8 дней назад

Good deal then. I put them on mine and will leave them in place, but I'll never break them off from any kind of abuse. Thanks for watching!

@1EVILZ06 5 месяцев назад

It’s two sets of bearings a lower bottom seal and two spacers.

@pmtips4482 5 месяцев назад

Thank you for the information!

@apolonioavila8479 4 месяца назад

💯💯💯💯💯

@pmtips4482 4 месяца назад

Thanks!

@dalescott752 11 месяцев назад

I change the caps and it has a hole on the top and when you put grease in it come out of the cap on the top where the I guess it’s a vent hole don’t have to pull the cap off just pump grease in the king pin.

@pmtips4482 11 месяцев назад

Be careful not to allow rain water to migrate in those top vent holes. Thanks!

@brianrandall-gq7bx 2 месяца назад

So when i put grease in mine the grease comes out the bottom of the king pin. The top of it after i remove the cap is dry and no grease at all. Is that a problem?

@pmtips4482 2 месяца назад

You probably should jack the caster up enough to take the weight off and try greasing then, see what happens and also you can pivot it by hand and see if you feel any abnormal resistance. Good luck and thanks for watching!

@kennethrobinson1672 Год назад

Hey man ..when that part go bad does it make like a little popping noise ever now again

@pmtips4482 Год назад

I have not experienced that yet but I think it would pop when the bearing broke or was bad. Thanks for watching!

@patrickkohls2721 2 года назад

So whatever happen to the canister that was leaking gas 9n your scag

@pmtips4482 2 года назад

I'm using the original canisters. I just empty the gasoline out of them and slap them back on. Now when we park the Scag after mowing, I'll loosen the fuel caps, then just barely snug them so no pressure will build in the tanks. So far so good. Thanks for watching!

@mingsm123 Месяц назад

no special tool or screwdriver needed. just use your grease gun to pop the lid off.

@pmtips4482 Месяц назад

Thanks!

@Petrodrol 2 года назад

What size zerk fitting is that and where do I get them?

@pmtips4482 2 года назад

It should be a 1/4 by 28 (tapered/pipe fit), I got mine on Amazon. You can get straight or tapered, both will work, just be careful tightening them. Thanks for watching!

@bextar6365 Год назад

@@pmtips4482 Harbor Freight....

@wesleyrice8864 3 месяца назад

Can the Mobil XHP 222 be used anywhere it says chasis grease or is this a different type of grease?

@pmtips4482 3 месяца назад

I'm using this grease everywhere from wheel bearings to chassis, on machinery from excavators to front loaders, from spindles to axles. So far so good! Thanks for watching!

@wesleyrice8864 3 месяца назад

Thanks for the information.@@pmtips4482

@nathanbraun4 Год назад

I don’t have an owners manual for the mower. How do I get one?

@pmtips4482 Год назад

I would check online first then call the manufacturer to try and get one, maybe a digital copy. Thanks and good luck!

@EronIler Год назад

Put a small hole in the cap so you can see the grease come out.

@bextar6365 Год назад

Can I put a small hole in the cap and install a Zerk fitting since there is none below ?

@pmtips4482 Год назад

No, it would probably push the cap off before forcing any grease in the bearing or bushing. Check your OM, your kingpins may have sealed bearings or impregnated oil bronze bushings. Thank you for watching!

@jeffreystarnes9500 Год назад

What about the wheel? When do you know to stop?

@pmtips4482 Год назад

The wheel bearings themselves need several pumps every 10 to 20 hours. You can kind of get a feel for it after a few greasings. Thanks for watching!

@danskinner467 2 месяца назад

What size are the zerk fittings?

@pmtips4482 Месяц назад

On my Scag Cheetah they are 1/4" x 28 taper thread. It's a common U.S. size. A lot of ZT mowers are coming with metric 6 x 1 (mm) zerks. Thanks for watching!

@M70ACARRY 9 месяцев назад

My Bobcat Zero turn uses bushings. Grease oozees out the bottom. I'd rather they used bearings, though. Kinda cheap of 'em.

@pmtips4482 9 месяцев назад

I agree, many manufacturers take the cheap route. Thanks for watching!

@Johnrider1234 Месяц назад

We have the beast. Turf tiger 2. 40 hp vanguard efi. 61 inch deck

@pmtips4482 Месяц назад

Awesome! Enjoy it!

@jRieg 2 месяца назад

My Airens has sealed bearings don't need to grease them

@travelnguy2002 Месяц назад

My Ariens is the same way. It's 17 years old, so I'm considering opening them up and greasing them. 🤞

@pmtips4482 Месяц назад

Thanks for watching!

@justinsnyder6256 9 месяцев назад

I like not having the zerk. They just get ripped off

@pmtips4482 9 месяцев назад

Right, extra care has to be used with caster zerks left in. Thanks!

@nathanbraun4 Год назад

My Cap broke off, and I try to put grease in it

@pmtips4482 Год назад

You may have sealed bearings. Check your owners manual too for greasing information. Thanks for watching!

@guitarman7169 Год назад

By the time you shoot the grease in the cylinder, finger out the excess, you have wasted nearly as much as you put in. Why not just fill to the edge and replace the cap. Especially if it fills the circumference of the housing as it etches up?!

@pmtips4482 Год назад

I had not been greasing the caster pivots properly for 5 years. In this case, I wanted to push up and out all the old grease I could. You are right though, as long as you feel you are getting fresh grease migrated up through the bearing, you're good to go. Thanks for watching and commenting!

@JimsEquipmentShed Год назад

What a poor design, they should have a bolt on cap, and a weep hole for over pressure. And maybe a sticker that says grease two pumps, once every two weeks......... But no zerk fitting, requiring a special tool to put grease in? Ridiculous.......

@pmtips4482 Год назад

I hear you! All the makers have their own little ideas. Thanks!