Zhiyun Crane 3S OFFICIAL tutorials C5 solo operator - on cinema cameras 

Absolutely LOVE the Rocker Handle set up with A/B points. What a game changer! I like to use T for close focus and W for far, set the points and keep moving, Thank you for your great videos!!!

Extremely Helpful i just Subscribed!!!!!

Thank you! Super helpful

Nice one you are good at this thanks.

Hi Marcel, thank you so much for your Videos, they are very helpful! I tryed your trick with the Zoom-Rocker-Switch and the dolly in/ dolly out focus pulling....on my Crane 3s it actually has no effekt if you use the left or the right USB-C Slot on the crane 3s (!)....if you connect the max. Motor (left or right) the only way to trigger the motor is the rocker and if you connect the min. Motor (left or right) the only way to trigger the motor is the big focus Wheel at the center of the crane 3s....it seams the crane 3s knows wich motor is atteched and atomaticly triggers the motor only if you use the "right" Wheel on the 3s....having said this, the only way I can actually go for your trick is to put the max.Motor to the focus side of the lens....Do you remember, if you used the max.Motor for focus pulling when producing this part of the Video ? Or is there something I did not consider ? Thanks.

Videos getting better and better my friend

great video. What length of a LEMO cable is this? what should the flexible LEMO be, to not be too short and not have too much excess cable ?

Спасибо! У меня было много испорченных кадров из за дрожания. Вы показали, что нужно перевернуть вверх ногами. Это вариант! Единственное - не удобно держать. Но главное - не испортить кадр!

I hope you can help! I have a Sony FS5 that I wanna setup on my Crane 3S but I don't know how I can get the camera control to work

hey great video…ive got a question…when balancing the gimbal on a crane or car rig do you balance it upside down or before you place it on the crane or rig? Thank you

Thanks

Hey. Tell me, when you use “L” mode, do you have a little shake on the CRANE 3S when you move forward or backward?

What is the link to that flex cable that you're using?

What is the name of the extension for the focus assistant, I saw that it is higher and close to the lense?

What the quick release plate system you are using?

"Its lightweight, easy to pack, and you can get it ready very quick." < "One other thing to note is, the camera package is heavy."

I would suggest 50 + % was out of focus. You need a camera assistant for that. No way you precise pull focus with that setup. And you also need a real wireless focus. For that lens you can forget that focus motor.

Where did you get that monitor arm?