I'm not sure I could pull off the whole project, but I can use a 3d printer. Can your friend post or share the link to the STL or 3MF files for the model?
I figured it out. You go into the mixer tab and turn down the output to zero on the output. Then it only uses the audio from the DAW. Had to call Tascam in that one.
Nice recorder, I love the Tascams, have the DR40 and the DR701D, both excellent recorders with very low self noise, what you have there is a great piece of kit.
My Sony M10 went through the washing machine... and I'm still sad about it. And for crying out loud, they DISCONTINUED it!!!!! Effin' bastards. I always left in standby mode to catch some of the most amazing things. The ease of use and decent sound quality make it such a great compromise to a more advanced setup
I wish Sony still made the M10 or a similarly-capable model. There are the bigger brothers, but none that have the sound, battery life, and size of the M10. I picked up a Roland R-07 that works pretty well, but it’s a little noisier than the M10 and lacks the battery life.
I still have my good old Zoom H4 and recently started recording again here in the dunes while walking. Caught some lovely moments with various weather and birds. A few days ago it started raining and I could hear thunder brewing so I quickly grabbed my H4, went to the balcony and recorded around 45min to an hour of rain and thunder. Was a lot of fun and the results were great!
Thanks for this lovely video homie. I'm looking to record quiet nature ambience for ambient music, and wanna keep the setup minimal as possible. Would love to hear any reccs you may have or just advice on post-recording to clean up signal noise. Much love and all the best!
Cheers for watching Ben! I would certainly recommend a small recorder with a 3.5 PiP input or xlr input. This way you can have more sensitive external mics plugged in that can pick up ambiences very nicely. I have a video on my channel about “affordable field recording setup” I would recommend watching. In terms of cleaning up the recordings I like to use Isotope RX but you could use a cheaper software like Audacity or Reaper and use a free denoise plugin
Thanks Craig! Yeah the magnets are great. Watch out for vibrations though depending on the surface you stick them to. If the metal is wobbly the mic might pick it up or pick up resonating frequencies. A bit of eq in post or moving the mics around can help sort it though!
Thank you! This was actually quite a ratchet setup as I was travelling at the time haha. I held one of my USI Pro mics inside of a cupboard that I lined with a duvet to help get rid of unwanted reflections. Not perfect but did a decent job
Thanks! I was using my friends grandads old lav mic kit. Consisting of a Tram Lav, a micron transmitter & receiver going into my zoom F6. I did quite a lot of processing in post as my fleece was very scratchy. In hindsight I’d recommend using a bit of fur over the mic so it doesn’t scratch on the fleece as much
Hiya Uve_, do you mean the Zoom H1 for £30-£60? I don’t think I mentioned the price of the Tascam as it is now discontinued. I would however still recommend you get your hands on one in the second hand market if you find one as it’s a brilliant device!
@@rarefindssound any tips on hard to reach (subterranean) urban environments .. awkward access, no power and sound source at a distance (layman friendly)
For me, it's hearing the results back after a big recording session. I always find the prep, organising and recording stressful, but I always know that it's worth it in the end.
seeing the comments, it seems a lot of us get into, or at least stick to it for the same reason. slows me down and gets me in a calm mood like i cant get with other hobbies.
I’m in a similar position currently. I have so many of these recorders now and it’s just ridiculous. I get overloaded before a trip about what to take with me or what setup I’ll do and generally spend more time fretting about it than actually doing it and enjoying it. I’m slowly condensing my setup to one larger recorder (tascam x6) and maybe 2 smaller ones perhaps the zoom h1e and the Sony m10. Thing is, I worry that I’ll miss my other ones - the Sony A10, the OM Systems LS-P5 and the tascam DR100MKIII. I just don’t need all of them, but I can’t bring myself to part with them as I know I’ll probably regret it. I’m thinking I’ll just hang onto them for now and maybe a time will come where I have a firm idea of one large and 2 small recorders and sell the rest. I’ve put my tascam Mkiii up for sale recently and keep taking it down and then reposting jt. I’m thinking it’s perhaps best to hang onto them all if there is ambiguity and only sell up when I’m confident they aren’t being used anymore.
I sometimes find it hard to part ways with equipment too. I’d love to collect them all but it’s not very practical. You’ve got some great recorders there! Perhaps you could rent some of the ones you don’t you as often so you don’t feel as though they’re going to waste. In regards to taking kit for a trip, I’ve learnt that in most cases I can just go back again haha. It’s a good excuse to visit a place I enjoyed again in a different way
Also, I’d personally keep hold of the Tascam. It’s a brilliant recorder and a very solid build. Will likely outlast some new recorders. It’s the main reason I’ve kept mine
@@rarefindssound I have mulled over the possibility of renting kit out and looked at Fat Llama 🦙 as an option. I just worry I’ll send something out and it would never come back or would come back broken and I don’t have much confidence that Fat Llama would help in that regard from what I have read. That is a good point. There’s a couple of locations I’ve been to recently that I am dying to go back to. What I got on the day was great but I had so many other ideas whilst there and wished I had more stuff. Thing is, on a massive hike, you really need to keep it small I’ve found. Hiking can be knackering anyway without a huge bag full of audio equipment and tripods etc too to lug around.
@@rarefindssound haha I had a feeling you were going to say that as I was typing the initial comment. It is a great recorder I have to admit. I’ve managed to do little bits of work here and there to reduce rattling sounds too. In terms of preamps, beside the obvious Sony D100, I often see the Tascam Mkiii and Sony M19 mentioned as having particularly impressive preamps with low self noise and sensitive microphones. This is definitely the case for both of them which is why I’m hell bent on at least keeping those two if possible. Perhaps 2 24bit recorders and 2 32bit recorders - such as the Tascam Mkiii and Sony M10 and the Tascam X6 and Zoom H1E could be kept and the others sold. I’m sure I’ll figure it out in the end. It’s just an absolute money pit as I’m totally obsessed with these things and I need to start streamlining and thinking more practically.
I have to confess I think I would really love a piece of gear like that. I am a musician, and I just bought a new H6 (upgrading from the H5 because of computer connectivity issues) it is far from perfect but I like it but it is still a tad bulky. I have a near 20 year old Boss multitrack recording device that I still use now that fits in my pocket. Such portability is awesome.
I think I had a similar experience to you. My Tascam DR100 is around the same size as the H6 & H5. A little too big to fit in my pocket (I use a roadman bag for that recorder). I love the recorder but an even smaller one (Sony m10) has opened up a world of recordings because I can always pop it in my pocket and have it with me on the go
@@rarefindssound to be honest I only just found it existed. Not really available where I live, Uruguay. Because of import duty everything ends up double the price.
@@TheCompleteGuitaristdamn, that’s a shame. I picked this one up on facebook marketplace while in Australia. Got a really good price, I’m assuming because i was relatively close to Japan. I can only find them double what I paid in the uk
I've never liked big slow to set-up rigs. I love the quick-to-setup, everyday carry rigs that I can bring wherever I go. I've recently been using the combo of H1e + mikroUsi's. I store them in a Tupperware container that serves as both water proof and crush proof storage. Also I can use the Tupperware container itself as a stereo bar if needed (hard to explain without a pic but it works well!)
Nice! That’s my go to kinda setup if I’m heading out and not really sure what I’ll be recording (Sony M10 & clippy pair). Love the easy to use and portability of it. A Tupperware container is a good shout. I might have to do the same!
