★ TOP 5 WAYS TO REMOVE STUBBORN GASKETS!!!

Подписаться 196 тыс.

Просмотров 45 тыс.

50% 1

How to remove old gaskets. My 5 best methods.
Tungsten Scraper ➨ amzn.to/3NeC34t
Blade Scraper ➨ amzn.to/3GQ84xi
Red Handle Scraper ➨ amzn.to/3aoilEP
Die Grinder With Discs ➨ amzn.to/398ZvkS
SHOP - www.caferacergarageshop.com/
Parts and tools I use:
www.amazon.com/shop/caferacer...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RU-vidrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
01. ★ MAKING a TILT TOP TIMBER Table With Some COOL FEATURES
• ★ MAKING a TILT TOP TI...
02. ★ BUILDING A PVC PIPE EXHAUST TEMPLET!!!
• ★ BUILDING A PVC PIPE ...
03. ★ WHY I DON'T WANT TO BUILD A YAMAHA XV750 CAFE RACER!!!
• ★ WHY I DON'T WANT TO ...
04. ★ How To WHEEL RESTORATION - TIMELAPSE / Cafe Racer
• ★ How To WHEEL RESTORA...
05. ★ Making a HANDMADE Alloy TAILLIGHT For a MOTORCYCLE
• Making a HANDMADE Allo...
06. ★ HOW TO MAKE TOE PEGS TO MATCH THE TANK!!!
• HOW TO MAKE TOE PEGS T...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================

Авто/Мото

Опубликовано:

3 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@videoworks7731 9 месяцев назад

Brake fluid works well ...if the gasket area can be heated a little then add the brake fluid...leave for 15 mins then scrape off

@CafeRacerGarage 9 месяцев назад

thank you mate

@ubuntumike5794 26 дней назад

Thanks

@MrKombiman 2 года назад

I've also used a purpose kept sharpening stone, on the flat areas, with oil as lubricant after the bulk has been scraped off. Keep it flat, work in circles, use the fine side of the stone unless you're real sure and careful. Does well to surface heads too but no replacement for having skimmed.

@glaucolorenzetti1343 2 года назад

I've got very good results and relatively quickly just by using a green scotch brite and WD 40. Obviously after removing the bulk of the gasket first. You should try this and see what you think.

@rsbharley4766 2 года назад

Nice video Dan, great job and excellent info. Ride safe, Cheers

@samiam247 6 месяцев назад

This works really well on bike parts, take one side of a decent pair of scissors and lay it flat on two of the flat surfaces which prevents it from ever gouging into the aluminum, I've also wondered if aircraft paint remover would work, I've only used it on paint but it's really strong, bubbles right up on first contact!

@garya3056 2 года назад

Great vid, Mate. Looking forward to the brushed aluminum finish vid, Dan. Each spring, I try to renew the aluminum fork tubes surfaces on my HD Fatboy… it’s not fun. Hope you have some tricks and tools to share! Cheers, Mate

@Dustmonkeycreations 2 года назад

Nice little vid mate👍🏻 Slow an steady wins the gasket race hay 👍🏻👍🏻

@MotoMango 2 года назад

Solid tips!! 👌👌💯💯🙌🙌

@thisisyaren 10 месяцев назад

really nice video man

@MISTERR0BOT0 2 года назад

roloc bristle disc green or yellow. or klean strip spray can and scraper

@garyyorke1080 2 года назад

Probably THE most hated and annoying of jobs on any build . Not heard of the gasket spray before but I'm a scraper and blade man .I do have a large machined piece of high speed steel tooling that I use as well if it's a bit stubborn. Then a very fine grit wet n dry on a metal block to just hone anything that you cant feel or see , obviously very gently and slow . Thanks as always for showing a few options and tips to help out the budding builders.

@jerrybigrig9475 2 года назад

I've taken an old file.. With a decent handle ..sharpen an edge to it ..works nice ..

@robertehlers4330 Год назад

My trusty snap on gasket scrapper is the best had it over 20 years already

@thinkingimpaired5663 2 года назад

Not my favorite job, however used to utilize a hot tank to remove stubborn gaskets. Back then the painted cases were slowly being introduced on new bikes. And if we wanted the painted look on motors we would paint them. ourselves. So Hot tanks worked really well.

@nick4872 2 года назад

What about your vapour blaster? Will it remove gasket?

@conmanumber1 8 месяцев назад

We have that given to use free by engine machine shop we deal with. My personal one is a carbide paint scraper.

@rikityrik 8 месяцев назад

Great video👍 Do you think paint stripper is about the same as the gasket stripper you had there?

@redtobertshateshandles Год назад

I'm wondering if you put a burl on that scraper how it would work??

@johnnynewburgh9745 4 дня назад

thank you

@jameskemp5532 4 месяца назад

Cordless impact driver with hex head stiff brass wire brush wheel works for me

@NitroFox0o 11 месяцев назад

WD-40 seemed to do a good job for me.

@siddino8602 Год назад

Instead of a sanding disc, a 3M yellow roloc works well. Theyre alot safer for machined surfaces. Thats just me though. Take with salt.

@scottschmittmusic 8 месяцев назад

Cool

@paulshelley3770 10 месяцев назад

Instead of using a 90° di grinder with a 2-in cookie, use a Dremel with a 90° attachment and there half inch to one and a half inch cookies for a less chance of damaging the cast aluminum case.

@garya3056 Год назад

*BE CAREFUL EVERYONE… THERE IS AN IMPOSTER SPOOFING DAN’S ACCOUNT!*