1998-2004 Ford F250 F350 F450 F550 4x4 Super Duty Front Axle Locking Hub Trouble Shoot Problems

Подписаться 7 тыс.

Просмотров 129 тыс.

50% 1

Get your Dana Spicer Parts Here.venturestruckparts.com/produc...
Ventures Truck Parts Talks About And Goes Through Common Problems With Fords Super Duty Locking Hub And Leaking Vaccum Seal.
www.venturestruckparts.com/
Contact us with questions 1800-464-1713

Авто/Мото

Опубликовано:

17 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@randycordes464 Год назад

Great video Thanks

@brianblithe2271 3 месяца назад

ford dealer parts told me cant get the black hub o ring or the selector switch (plastic on/off outer switch part, it does come out but theres a trick, move it to between c and k in "lock") v groove oring unless you buy a new locking hub assmbly. I could prob source one but today there is no American made legendary quality company oring kit anymore. If anybody knows of one still left, please let me know.There is a bearing inside as well, anybody know if there are any numbers on the bearing ?

@fbi6540 5 лет назад

I have the manual shift 4x4 on my 2003 I have a vacuum leak would that affect me? It’s not turning at all

@VenturesTruckParts Год назад

No. If you have a manual lever shift on the floor vacuum is not used to engage the locking hub. Vacuum in your tuck is only used for blend doors in the dash.

@murraymadness4674 3 года назад

do you know if the 2006+ f250 and f550 have the same knuckles on a 4x4? tnks

@VenturesTruckParts Год назад

F250 & F350 4x4 trucks have the same knuckle. F450 & F550 use the same knuckle.

@pebblehoppertj 3 года назад

I'm wanna put this axle on my jeep. If I'm not gonna use the auto lock and vacuum, do I really need these axle seals?

@VenturesTruckParts 3 года назад

Yes. If you do not water and debree can get into your wheel hub needle bearing.

@benkostenko6184 2 года назад

Does the metal ring dust plate cover get reinstalled with the new knuckle vacuum seal?

@VenturesTruckParts Год назад

That is s separate part. It would be installed on the shaft before installing a new seal.

@JoeyF350 6 лет назад

Does the Ford Superduty only have one lock on the driver site of the front axle or on both sides on the front axle ?

@VenturesTruckParts 6 лет назад

There is a locking hub on both sides of the front axle.

@galehess6676 4 года назад

@Preston McDonald maybe his was missing one. it has 1 on each hub. lol IDK

@elsandypants84 4 года назад

Do you have any vid how to rebuild or make the selector on the hub move easily?

@galehess6676 4 года назад

Pull hub out and squirt in some household oil from outside, light mineral oil, light oil. Don't grease. Don't pull apart, fast n easy.

4 года назад

Buy new hu s

@brianblithe2271 3 месяца назад

v groove oring could be jammed or withered away, theres a trick to taking off the selector switch outer cap part, you have to turn it to an exact place but i forget right now exactly where that is. -correction i looked it up and its in between the C and K.

@billbooth4147 4 года назад

Our 2004 f250 super duty dose not have vacuum going to it

@VenturesTruckParts Год назад

Check the vacuum pump in the engine bay for proper function.

@tone569 5 месяцев назад

How do you remove the main baring in the hub Assembly ?

@brianblithe2271 3 месяца назад

I heard to oil it repatedly then use flatheads but never done it. I also want to know if there are any numbers on bearing and if we can still get a replacement somewhere.