***2" LEVELING KIT 2001 F 250 2WD 7.3 POWERSTROKE DIESEL, TIRES RIMS AND MOOORRREE*** 

Yes sir,it sure takes time and patience.

I did freshening up on 04 ram 2500 n brakes will probably be doing same with new 2 me 00 f250 as well but on the ram the spring spacer went on top

Thanks you very much sir.

Thank you very much, good luck with your project 😊.

Yes sirrr, much better look than stock grille for sure.

@@oggarage3459 where can I get that grille?

@@tonymarie55 I bought my off of Amazon the link on the description should take you right to it, thanks have good day.

Thank you

Thank you.

Thank you very much, yes she looks way better now than she when I bought her.

I put led bulbs in stock housing and its 500 times better!

Yeah bro, the new front end gives it a fresh look, from the old yellow headlights and faded gray grille.

Yeah mine rubbed on the front chrome bumper so I had to trim off on both sides but the way I did it you can't tell.

Thank you, the truck was done in that same video check it out at the end of the video .

Nice, I bet it'll look badass, I just installed the PHP Hydra chip last week and let me tell ya I love that truck even more now.

@@oggarage3459 Hydra is a add on. At this point I’m running Jelibilt tunes. Hydra sure wakes up the old 7.3. Running 238/100 Full Force sticks with a KC stage 3. It rips pretty good for a mild build.

Thanks, rims are 20x12 - 24 offset and tires are 305/55/20👍

Thank you.

Thanks for watching, am not very good at this youtube thing yet but thank you 🙏, and good luck with your project, if you have any questions I may be able to help, greetings to all the UK people.

@@oggarage3459 ha!! I'm the same on social media bud, Instagram, tictok but my kids show me, but RU-vid I use as upload all my cruise ship videos from drone.. Only had truck 3 weeks but truck number 7... Done same as you, got the 2005 grill fitted and one piece headlights, but they are a pain as have had to do alot of cutting to get to fit.. Next is the level kit then wheels, done the 6637 filter, have a Hydra chip, then exhaust after wheels but will struggle as most don't ship here... Thankfully everything works and serviced it.. One question though, can you fit a double din radio? Sure I did on my 6.8 SC dually but was 15 years ago so can't remember if direct fit.. I'll sub you anyway as interest in the trucks no matter, I also have a 09 LAPD Tahoe PPV 😁😁😁

@@cruisescape thanks for subscribing I've been trying to grow my channel but it takes a lot work,I work on cars a lot but don't film it most of the time,like my 2006 f 150 I painted with black bed liner looks good but I didn't get it on video,anyways in answer to your question yes a double din radio will fit but you have to order a double din dash kit so that it will fit nice and snugg and you might have to do a little bit of trimming, I know I had to trim some when I installed my stereo on my E350 to make it fit.

@@oggarage3459 thanks buddy, Actually I do now recall having to cut between radio and heating panel.. The cage kit, install kit will be an issue, so will have to import 😢 I thought about doing DIY videos but I normally throw shit, start swearing, etc plus I sound like an English South West farmer, 🤣🤣🤣Example, trying to remove original O2 sensors, 4 of the buggers on a LAPD Tahoe PPV as running rich on bank 1, they will not budge, like not a tiny bit and on the easy one at present, 2 more up nr manifold will be when a set it on fire 😁😁😁. But anyway thank you and good luck growing your channel..

@@cruisescape well if I could I would send you the dash kit they're pretty cheap here and easy to get.

Naw is better than it was before but still has a little bit of leaning.

@@oggarage3459 So do you think it would have been better to do more than 2"?

@The 7.3 Powerstroke guy probably but I couldn't find anything more than 2" for a 2wd.

Yes alignment still good drives nice and straight and the rims are 20x12 - 24 offset, tires are 305 55 20, I did had to trim a little bit off the bumper because it would rub while backing up but is not noticeable .

There was a little bit of rubbing,I had to trim the front bumper a little bit all good afterthat

Thanks for watching, I left a link to this particular grill on the description below just click on it and it'll take you straight to Amazon. 👍it should fit a 99-2004 model, no cutting or any modification needed.

No rides the same.

You're welcome 😊

Thanks rims are 20x10 - 24 offset tires are 305 55 20 the grill ECOTRIC Front Grille 2006 Style Compatible with Ford 1999-2004 F250 F350 F450 F550 Super Duty 2000-2004 Excursion New Grille Chrome Mesh Style a.co/d/3lgT970

They did thats why I had to cut off some of the front bumper, no more rubbing.

Click on the description and it'll show you the parts I used.thanks .

Thanks,wheels are 20x12 -24 offset and tires are 305/55/20.

@@oggarage3459 thank you

@@oggarage3459 no rubbing on full locked turns?

@@boosted_e3044 it did rub a little bit but I trimmed off the chrome bumper a little bit, the way I did it you can't tell by looking at it.

Yes click on the link below and it will take you to the camber bushings I used they're ACdelco brand

@@oggarage3459 thank you I already ordered them. Hope it works.

@@XqeDiosxqe ok 👍 good luck.

Yes, mine is a twin beam 2wd.

Thanks, not the best but thank you, I used ACDelco part # 45k6525 from Amazon.

Okay cool, did you have trouble getting it aligned? And did you grind the spindles?

@@Blchamr988 no grinding at all and the shop I took it to did a good job with the alignment it drives straight as an arrow.

@@oggarage3459 that’s awesome man the truck looks bitchin!

@@Blchamr988 thank you, it definitely gave it a different and more aggressive look I think.

I drove it to the alignment shop about 8 miles aways and it felt ok to drive .

@@oggarage3459 does the wheels look bad after ?

@@TL-mi4zq no wheels looked great.

@@oggarage3459 hello and what was the camber caster you used ?? What degrees ??

Buenos dias, todo bien hasta el momento no le falla nada yo nomas la manejo local pero estas trocas con el motor 7.3 so las mejores trocas de diesel que ay. No compres la 6.0 o la 6.4 muchos problemas la 6.7 un poquito mejor pero la 7.3 es la mejor. Buen dia.

Rims are 20x12 - 24 offset tires are 305/55/20. Thanks

Mine are 305/55/20, and I had to trim both sides of the bumper because they would rub.

Dang yeah I’m having a hard time finding a 4 inch lift for it 🤦🏻‍♂️ wanting to find a 3 inch leveling kit for front and back

@zackestes5958 If it is a 2WD, I'm pretty sure they don't make lift kits, only leveling kits. I looked everywhere and wasn't able to find any.

@@oggarage3459 yeah it is 2wd … I think I found a 6 inch lift can’t remember but that’s the only thing I could find did you have to cut a whole lot ?

@zackestes5958 Not much, it wasn't really noticeable .

305/55/20, +20 offset .yes, they did rub a little bit. I had to trim the bumper a little bit.

@@oggarage3459 they look great, I just did the leveling kit on my 2wd 7.3 today, next is tires 🛞

@betotrokas it definitely changes the looks of the truck. Good luck with your build Beto.

The camber nut I used is and ACDelco,my truck was also camber before the alignment but the shop I took it to didn't have any issues doing the alignment,she drives nice and straight.the link to the camber nut I used is in the description, am not sure if the camber nut you used is the problem it may be.

Also the leveling kit I bought was a 2" and it came with shocks that are supposed to be longer than the stock ones.

I didn't convert it to coil springs, I just added a 2" leveling kit.

These are 305/55/20 which are equivalent to 33.2x12R20 and I had some rubbing at first but all good after trimming some of the front bumper.

You mean for the wheels?? No spacers

Twin I beam

Did your leveling kit say “will not fit twin ibeam”? All the ones I find say this. I just need to know if they really do fit

You think so.

@@oggarage3459 I do. Most factory rubber bushing flex with suspension movement. The center pins dont rotate in the bushings like after market urethane, or solid bushings do. Just tryin to help. If the bushings are actually under constant tension they will fail prematurely and lead to alot of noise and sloppy steering. The control arms also need to be loosened and retightened while the truck is sitting on the ground at the new ride height.

@@edjackson4389 that makes sense, thank you for your suggestion 🙏.

⁠@@edjackson4389I’m not yet familiar with suspension work on this truck, could you give a quick explanation on where those bolts can be found? And when you retighten them, would it be when the truck is sitting on the ground like you specified with the control arms? If yes, i guess the truck is never even jacked up at all for this part and it’s just a matter of cracking the bolts loose and just torquing them back down again with the truck never leaving the ground? Long questions, but I’d appreciate any feedback

@@thejman99 It will be the inner mount bolts on the Ibeams where they pivot. I get them loose and bounce the truck by pushing on the front bumper to make sure they settle into their new position and retighten them. All this needs to be done with full weight on the front suspension (not jacked up).

20x12 - 24 offset and tires are 305/55/20.

305/55/20

They are 20x12 - 24 offset and tires are 305/55/20

👍👍🙏

Wow thanks dude you maded my day✌✌

Took it to an alignment shop.

Yeah a little bit rougher due to the fact that I have off road tires other than that it rides nice and straight.

Amazon

What year and have the link?

@Angel Lopez 2001 yes link to this grille in the description below, sorry for the late response.

Rims are 20x12-24 offset and tires 305/55/20.

They are 20x12 -24 offset and tires are 305/55/20.

Thx for info!!

@@sergiobueno2393 your welcome.

Thank you for the comment, l will try and do that today for you, what parts do you want links to?

Tanks sor 👏

I have one just like yours but I put a ford f350 differential and I stretch with it 25 thousand pounds 7.3 It is a machine for work it does not run fast they are somewhat slow to get out but the truth is that I do not change it for any of the current market 25 thousand or 27 thousand for an old engine is a beast I walk a mini 5 car trailer

@@raidelricardvxo9653 yeah they are beast trucks I love mine , I recently installed the php hydra chip on mine and it woke her up big time, she is fast very noticeable.

It's a leveling kit bro not a lift

305/55/20.

@@oggarage3459 do they rub?

@hectoramezquita2004 they did rub a little bit. I had to trim a little bit off the bumper.