2019 RAM 1500 2" WHEEL SPACER INSTALL! *MUST HAVE* 

Looks great! Ive got 1.5" spacers on my Ram 2500 4wd and no problems for 2 years so far. I've towed 10k lbs with them on the truck.

Thank you, you answered my question, planning fender flares w spacers on stock wheels

Looks perfect I’ll be putting a set on my 2019 soon thanks for the great video

I’m putting 2 inch spacers on my new Chevy this weekend. Been binging spacer videos all week.

Looks dope I’m running 35x12.5x20 on my stock 20s on my 2014 ram This video for sure has convinced me to throw some 2 inch spacers on there now

Great look .Have mine 2 1/2 , lift. Chrome wheels 2 in.painted matching white studded wheel flares sport. Rams look super.....

I was just checking videos out before I add it on to my ram wanted to see what it looks like.. I like the way it looks on your vehicle.. I’m going to order a set tonight😎👍

Great job and video. Looking to do that in the near future on my truck! Nice truck!

Love this truck!!!!. Good job, bro. Keep up the good work.

I'm not much of a pickup truck person, however I'm digging that instrumental playing in the background lol

i just went from 1 to 2 inch spacers on my 2008 ram 1500 and i really like the stance. just fyi i had a welder weld a flat piece of steel on under both rear lower shock mounts to give me an easy place to jack up rear tires

I did the same for my 2017 looks great thank for the video

I was taught to put the truck on the ground before torquing the lugs..

Looks great with that stance. Great job. 👍

Sharp looking truck. I love the white on black. My titan xd is the same color scheme, looks so sharp.

I think it will be a good Idea to put some anti seize compound in between steel and aluminum, just in case you plan to remove them later, also on mine, I put some blue lock tie and torque it to 120 ft/p, just my preference. Looks really nice with 2" mine is only 1.5" but I think It looks sick too.

It looks awesome. It looks it has bigger tires. Nice!!

That's a beautiful truck, If I had that in Michigan I would grease the whole underside in axle grease! I think you need some short flaps to keep the rock chips an debris off the sides or film wrap some of the most vulnerable areas.

Awesome Job Sweet Set Up ! Thanks For sharing not many do 💪🤜🤛

Def a must have, looks damn good. You know whats also a *must have* Jack Stands. Not knocking Harbor Freight, but you probably don't wanna bet your front end on a $68.00 floor jack.

Broooooo this came out sick !!!! Wel done bro

Looks good ill be getting them for my ram

Nice truck. Great tires. I have the same on my ram and love em out here in New England. I went with a 1” spacer and glad I did. My big concern was crap down the side of my truck. One. Suggestion that I would make is throwing a pair of Oem flares on . I noticed the new models don’t bump out as much as on the older body but anything will help. Enjoy the new ride.

I think that looks really good

That’s a demon in that garage 👌

I love my ko2's, best tires I bought instead of highway tires....nice truck

Looks really good !!

That is a nice looking truck!

Just enough and I like the Stang.

I like it better than stock. But if your complaining before about dirt kicking up on your truck, NOW will be more !

Super clean truck

Had spacers on my F250. They lasted about 9 months. Then on a long ride home, the front passenger spacer caused 7 out of 8 lugs to break. They almost killed me. I was doing 70 mph when they all broke at once. And yes I torqued them to specs, twice and used blue lock tight. Sure looks great! But if you want a wider stance, ditch the spacers and invest in wider wheels.

The beauty of owning a truck is customizing it to your liking. With that being said you're doing a great job keep up the great work.

Definitely looks better than having its stock

Truck looks sick man

looks good might just have to do it to my2020

Those look good!

way better than stock!!!

Must have....If you like door chips. Scratched fromt windows and dings from rocks and salt. I run 22x14s in the summer months and as soon as the salt flies i sqap to the factory 20s on my 17 f250. Inlearned on my previous 15 that when the salt and road debris gets thrown up the sides of the truck it totals the paint and gets stuck in the window mould and scratches the windows when youbroll them down. Wheels pokin out and winter are a terrible combo

I have a pointer for you man. You should have put anti seize grease between the spacer and the hub since you live in a cold state like me reason being is they can get siezed up. But it looks great man. I will be doing this when i get a chance.

Looks solid

Beautiful truck good job doing the work u did what size are the tires

Really was hoping to see compared to 1/2”

I live in royal oak mi, I’ve been thinking about do this to my 2019 ram 1500 midnight edition. Have you been driving this daily since you have put the 2” spacers on? If so, how does it ride?

ABSOLUTELY love the video very informative bro. By the way in this video, was your suspension also stock? I'm thinking of getting these spacers now.

I like the way your tire looks, as you say......perfect 👍🏽

I’m in Michigan also, traverse city area and we use sand on our roads

Any suggestions? I have 10 wides rn but planning on going back to my stock Laramie wheels which are 9 wide , but I am going to lift it 4 inch but want my stance to be wider than what you have right now I was hoping the 2 inch spacers would bring it out more than it did here .

Looks great, Im new to the trucking world. Getting a 16 Big horn looking to do some future mods like this.

Looks damn good though 🤙👍

Looks great 👍

I had two inch spacers on my 2019 classic an blow my front wheel bearing if the roads in your area are full of pot holes go to the proper offset rim to get the stance you want

1inch keeps it tucked (can lower 1inch to save 5%gas) or raise it to kill 40% oddly, 2inch makes its right with rolled fenders, 3inch makes it a bulldog but needs 2" flare. Not sure with spacers but I'm assuming air foil is different from catching tires for MPG. When appeal takes a back seat to MPG i question things....

Do you still using the 2" hub centric on your ram ? If so. How they holding up?? Thanks.

With fender flares I would go with 2” but without I’m going smaller .

Looks great!! The threads and pitch on the spacer studs match the oem lug nuts on the ram??

Couple questions I hope you can answer. 1. Did you smoke your tail lights? They look good. 2. Any rubbing on front when turning after the install? 3. Did you install leveling blocks on the front? Great looking truck!!

You should torque that spacer and lug nuts to 130-140 ft lbs

It looks good! But how will they do over time? But nice looking truck!

does it comprise the turning ration of the truck?

Wow so good nice job PAPÁ

Clean truck man! Thinking about adding 2” spacers. Since my 7” lift my front spindles poke the front out a little further than the back. How are they holding up?

Hi gorges. Sorry I don’t recall who made the 1” spacers. However they were made by one of the more well known companies and made in US. Good luck James Jannell

...the only thing I see is the Demon..... nice garage dude!!!

Have you gotten the death wobble? I'm on the fence on getting the spacers because of it.

Would be better off with 12.50 tires. I have 12.50 on my 2013 ram sport and I have about an inch all the way around sticking out but I dont live up north so it's not salty and nasty

Is your truck a big horn sport? Just wondering what to look for that has the painted front end and led lights.

what lb'age did you torque to? sorry if I missed, I FW through most of the install

Looks awesome! Why didn’t you use lock tight?

For me i leave the way i bought it.. It may need a wheel alignment?

Will the spacers u used work for a 2020 ram big horn 6 lugs new design?? This is driving me crazy lol ...hope u can help brother

Dude your truck is clean af ... I’ve got a 2017 ram sport with a summer set up of Moto Metal 962 wheels -44 offset. Wrapped in 33 x 12.5s love it. Pulled them for the winter and wanted to do the same as you stock sport 20s with some decent snow rated tires. Clicked the link for the wheel spacers and it said that won’t fit my truck on the amazon site. Is this true? I just want the same sort of set up you have for winter with spacers? 🇨🇦 Calgary AB

@DOOWORKPRODUCTIONS Thanks for the video, finally found a video with the same "stance" goal that I have. I recently bought a 2022 Dodge RAM 1500 Limited, and it has the AirRide suspension, which makes lifting it quite pricey. Did you do anything to the suspension, did you put any sort of lift kit on it? I'm sticking with my factory wheels, they're 20's, and I like the look of them, just don't like the stance, and I want a bit of an aggressive'ish tire. I love the look of yours with the spacer, and tire choice, just want to confirm if you've done anything to the suspension. I'd really appreciate any insight you can give. Respectfully, Nitro

Looks awesome man.. do u recommend a thread lock on the adapters? Just bought some 20x9's and after the level goes in this is next..

I have a 2020 big horn just wondering if u can install spacers without doing anything with the lift ?

I have factory rims and I like the setup I had them powder coated black and put some more aggressive tread tires on there I’m adding a 2.5” spacer does anyone know if it will rub while turning or it it ok on factory rims and tire size

How is your turning lock affected by this mod ??? and as other have said it looks great but will make your truck even more dirty

Those are some nice stock rims

I suggest getting mud flaps.. otherwise your paint will be ruined In a matter of months i made that mistake myself.. rock chips are killer

Hey bro, we both have white RAM 1500, and black 2018 Road Glide specials. Cool beans.

I’m thinking about adding them to my Ram with 24’s Have you had any issues?

I need this!

Is your truck leveled or lifted? If so how much?

Nice looking truck! What size are the tires?

Save the half inch spacer for the 22x12's :P

How tall is your garage door? And what is your tallest tire set up, i am leveling my Ram and want to put the tallest tire that fits in my 7’ garage

Looks good. You must have a 2 inch level kit up front? What is the BFG tire size??

On the product links it says 78.1 but for the Rebel is 77.8 center bore. Will still work without any vibrations?

Love your videos, the Amazon link takes me to a wheel spacer for Chevy product. Is that the correct one? Thanks again and keep up the great work. I just did a 2.5 level and it looks killer

Quick question maybe someone can help. I have a 2017 ram 1500 I bought the same 2 inch spacers and I did all that was said and it runs great until I reach 70/75 mph And then I start to hear a chatter noise no vibration or anything just a chatter but if I go below 70 it stops does anyone know?

i like the level stance,not much rake from back to front. must have a leveling kit or factory air suspension.

Michigan boy here too! I just grabbed some 2’ for my ram and can’t wait to put them on. Do you have a link for the taillight covers?

I just put 2” spacers on my 2019 ram classic. Love the look, and it’s just enough poke. Do you rub on the inner wheel well when turning full lock? I noticed on my truck when I’m at full lock I rub on the back side of the wheel well.

That is one gorgeous looking truck!

Good look

Nice truck

Would this spacer fit my 2016 ram 1500 with the stock wheels?

Now you're gonna need to check/ invest in some Fender Flares to keep that Salt and Rocks off the Side of Your Truck...In White or Black...Your Preference...Im doing the Same with My White 23' Ram 1500...Thanks for letting me know what it looks like now! Appreciate the Video.

Looks great? Will there be any premature wheel bearing issues with having spacers on it?

What is the music during the installs?