4l60E Neutral Safety Switch

Подписаться 41 тыс.

Просмотров 272 тыс.

50% 1

Curt explains why you might need to replace your 4l60E Neutral Safety Switch . When removing the harness you could damage the switch itself. We highly recommend replacing the switch. Curt then shows how to install the switch properly and how to adjust it. Make sure your vehicle starts in park, if it doesn't adjust the switch until it does.
Give us a call at: 800-708-0087 to get your NSS today.
MONSTER'S Website: www.monstertransmission.com
Thumbs up the video and SUBSCRIBE for MORE!
ru-vid.com...
Check out our Socials!
Facebook: / eatmyshift
Instagram: / monstertrans
Twitter: / eatmyshift
LinkedIn: / monster-transmission-&...

Авто/Мото

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@williammiller7799 2 года назад

I got very lucky and used no heat and they came out. No breakage. Thank god

@pastormichaelhibbertminist7486 Год назад

great info on how to adjust the switch!!!

@codyheinemann9285 4 года назад

All you have do is heat the plugs up with heat gun or blow dryer and the connectors come out like butter

@DeliciousDeBlair 7 месяцев назад

Are all those wires JUST for sensing neutral/park? Are they not also used for shifting gears and engaging the lockup solenoid of the TC?

@Brandon_Jackson 4 года назад

This helped me get my truck started! Thank you so much!!!

@MonsterTransmission 4 года назад

We are happy that this helped, you're welcome!

@justinw523 4 года назад

One thing he did not say is...Use a "heat gun" or your ol lady's "hair dryer" might work too but anyways heat the connectors, after a bit and a little wiggle they will come right out!...y'all are welcome

@auto3garage522 Год назад

Hey I did a 4l80e swap repinned harness truck won’t start👀 adjust switch still no start but eventually I found out in 2 gear

@Jeremiah.1 4 года назад

Great explaining

@BadBrainsHR 5 лет назад

Is this the same for every neutral switch? I noticed on my Pontiac g6 it takes a lil bit longer than normal for it to start, like 3-4 seconds and sometimes it doesn't start on the first try.

@thomascarson4363 10 месяцев назад

So, are you supposed to put silicone in there to seal connectors, every time new switches installed?

@wraprock-itroll-francisfra9370 3 года назад

Thanks

@walan1202 Год назад

Do you have any ideas for the 6L80E transmission?

@georgegrieninger8776 5 лет назад

we have found that our electric heat gun will most of the time get the job done.

@detrickdavis5704 3 года назад

That's what i always use.

@marksimmons3801 Год назад

I got the ultimate tip for the harness !!!! I USE A HEAT GUN TO REMOVE THE PLUGS !

@smokindiesel6063 4 года назад

there is a tool to exactly adjust it. free with a gm replacement switch

@rodneycapers4215 Год назад

Im doing a engine swap from a 4.8 (2004) to a 5.3 (2002) the 04 has one plug and the 02 has two plugs can i swap the NSS from one to the other and it work?

@MonsterTransmission Год назад

Give us a call and we would love to help you out!