No video :(

How to Replace Neutral Safety Switch 00-03 Chevy Suburban 1500

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 346 тыс.

50% 1

Buy Now!
New Neutral Safety Switch from 1AAuto.com 1aau.to/ib/1AZN...
1A Auto shows you how to repair, install, fix, change or replace a damaged, worn out, faulty or shorted neutral safety switch. This video is applicable to the 00, 01, 02, 03 Chevy Suburban.
This process should be similar on the following vehicles:
2000 Chevrolet Suburban 1500
2001 Chevrolet Suburban 1500
2002 Chevrolet Suburban 1500
2003 Chevrolet Suburban 1500
2004 Chevrolet Suburban 1500
2005 Chevrolet Suburban 1500
2006 Chevrolet Suburban 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ouA/1AX...
• Pry Bar 1aau.to/ofK/1AX...
• 11mm Socket 1aau.to/ouq/1AX...
• 12mm Socket 1aau.to/ouq/1AX...
• 13mm Socket 1aau.to/ouq/1AX...
• 14mm Socket 1aau.to/ouq/1AX...
• 15mm Socket 1aau.to/ouq/1AX...
• Channel-Lock Pliers 1aau.to/oaZ/1AX...
• Side Cutters
• Ratchet 1aau.to/ov9/1AX...
• Socket Extensions 1aau.to/ouq/1AX...
• Torque Wrench 1aau.to/onv/1AX...
• Marker / Writing Utensil
• Floor Jack 1aau.to/ogi/1AX...
• Jack Stands 1aau.to/ofL/1AX...
• Wire Brush 1aau.to/obU/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Suburban 2000-06 9th Gen: • Chevy Suburban 2000-06...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/Hh/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@MrAquinas1 2 года назад

Shouldn't you use some thread locker on the bolts?

@foonme99 11 дней назад

Thank you so much for this invaluable public service!

@lovefeist3136 4 года назад

Outstanding video! If only you had replaced the Shift Shaft Seal while you had easy access. That's why I needed to see the Neutral Safety Switch R&R.

@jordancomeaux6888 5 лет назад

For anyone not noticing, this is for a 4wd/awd vehicle. Same jist as a 2wd truck, just not hing to do with the front drive shaft. Another thing is my shift arm that came off the threaded shaft faced in, instead of out like in the video. Pay attention when disassembling. Another thing is the plugs are glued from the factory. My factory switch was melting, so i dont know if it helped with the glue but i had to work it off with a wide blade flat head.

@airgunningcolorado78 5 лет назад

A heat gun works great for removing the plugs. About 30-60sec on each.

@thomaseverley3847 3 года назад

I've never once seen them come off the gm trans that easy without using a heat gun. Gm uses a dielectric grease that acts like a glue when cold.

@evlutionzllc5519 Год назад

Finally, someone explains exactly why they need to be heated up. I've seen and heard all of this mention of heating the 'glue' in the connectors and I'm losing what's left of my mind trying to figure out why they would glue such a thing, lol. Thank you for helping me.

@phillysfishybusiness8875 5 лет назад

Awesome video I want to point out though when you install your new neutral safety switch you can't just bolt it on to the transmission you have to adjust it by tilting forward or backward until you find the right position took hours to figure that out you don't show that in the video at the end best way to get close is to look at the old neutral safety switch hope it helps everybody

@victorsandoval7602 2 года назад

Y'all be sure to have a heat gun or a hair dryer because those 2 connections have glue/adhesive. Break the Switch if you have to and save the connections.

@obfuscated3090 7 лет назад

Procedure worked fine on my 2000 Silverado K1500 truck. I didn't disconnect the drive shaft at the booted end because there was plenty of room to work around it but I have a Jeg's downpipe instead of stock exhaust so that might make a difference. Mechanic who installed my rebuilt transmission (I subbed that out because I have a bad back) obviously had trouble with the connectors which were not fully inserted, but my switch went bad due to age which wasn't his fault. Next time I'll do it myself as I'm used to doing.... Not every so-called "experienced" mechanic gets it right which is a great reason to do it yourself. The way I lube such connectors is with silicone dielectric tuneup grease available at most auto stores. It's designed to exclude water and protects your contacts from moisture. Permatex 22058 Dielectric Tune-Up Grease is an example but there are many brands. It's useful stuff.

@1AAuto 7 лет назад

+Ob Fuscated Thank you for checking us out, as well as all of your feedback. This information will certainly assist others perform the replacement. 1aauto.com

@overlandtowater 4 года назад

Its not as easy removing the plugs as they say...mine was glued in from the factory and you need a heat gun to remove the plugs.

@williamdambrose5039 3 года назад

He's not kidding, I used a heat gun it worked great. And there was definitely glue in mine too

@somaday2595 3 года назад

Instead of glue, could what you saw have been a silicone-based dielectric grease which can definitely stiffen when colder?

@JovanValentin711 3 года назад

Pain in the ass and this isn't my first time Removing that clip.

@foonme99 11 дней назад

The symptoms that brought me here are when I hit a bump in the road, engine power is cut and the door locks cycle. From searches, I guessed it was because the truck thinks i just slammed it in park from a flaky NS switch. Several bumps in a row or a rough patch put it in limp mode. The issue got progressively worse until I was able to catch it in the act as it set codes including B2550, C codes for traction control and data link codes. Unfortunately, this was not the cause. The cause was the ground wire that attaches to the block near the oil pressure sender. Remove engine covers and find the thick harness that crosses the passenger side valve cover. Bear the rear of the engine, a black w/ yellow strip wire exits the bundle. There are two failures with this ground: either oil seeps from the pressure sender lubing the nut so it can back off, or the ring terminal corrodes and snaps. This is a major computer ground. Relocate it to a convenient firewall bolt/stud. Also check the A pillar driver side ground and the one by the frame rail under the driver.

@kentstewart5436 2 года назад

Easy to follow instructions, thanks for your help.

@edwardbarr5163 Год назад

selector shaft is an 11mm open end wrench if you don't want to mar the shaft

@gackal1982 3 года назад

you forgot to mention that these connectors are glued to the sensor, use a heat gun or carefully brake the old sensor off them

@1AAuto 3 года назад

+jesus carballo Thanks for the tip!

@erichuie3329 5 месяцев назад

Just did this on my 02 Silverado 15004x4. I did not remove the front drive shaft. I just worked around it.

@1AAuto 5 месяцев назад

+@erichuie3329 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@joehernandez8657 5 лет назад

Does it have to be in neutral to put on the switch ?

@damiengary7222 3 года назад

I think so, because my shaft is at an angle while in park. His shaft was up and down

@gregcollins3404 5 лет назад

Was hoping to find out how to get the electrical plugs off. On both my Astro and Chevy vans, the plugs seem to be cemented in - at least the sealant they used sets up and virtually welds the contacts together. Of course they make the plastic switch housing in this area quite weak and breaks long before you get the @#$% plug out. And of course, they put the mounting bolt underneath the plug so you can't get the assembly off where you can work on it better. This is the kind of dumb design that gives me no respect for automotive designers....

@noahsaunders2896 2 года назад

I know this is a 3 y/o comment, but for anybody wondering, you need to heat up the connectors with a hair dryer or a heat gun on low to melt the glue they use. I struggled for quite a while before learning that.

@timeless6964 3 года назад

Maybe, Check that it Starts Before the Front Driveshaft..????

@lurimo2010 Год назад

Great video! Where was the ATF leaking from? Was it the shift shaft seal?

@qrs3658 2 года назад

Thank you soo much for this great vid. Definitely helped me out

@corneliomanzano2377 4 года назад

This also fix your reverse lights problem and fix when you slide the lever show on N but is already on D if this is helpful let me know please and you a great day

@1AAuto 3 года назад

+Cornelio Manzano We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@charlesjimenez6675 Год назад

The Transmission Shop " So Called " Rebuilt it $3.410 . I've had trouble since day one bringing it home 3 months later it's not going into overdrive, although I only drove it maybe one week out of the 3 months because I've had trouble ever since but this is the latest that he told me, that it is the neutral safety switch, he's telling me that the little indicator on top that tells you what gear it is on is causing the switch to fail " WHAT A JOKE ". I did take it to another transmission shop just so they could drive it and they said they would tear the whole transmission apart all over again but I ain't got that kind of money so I'm stuck . Dec. 19 2022

@bmiller3049 4 года назад

What about the epoxy that holds the connectors into the sensor from the factory??? There's no mention of this ...... Yet they portray the image of someone who knows what they are doing

@mikezaloudek4893 4 года назад

Yeah - those connectors are a bi#@% to remove

@bmiller3049 4 года назад

@@mikezaloudek4893 Yeah you can completely destroy them if you dont know they are glued in there.(dont ask me how I know that) 😆

@Fbstock81 5 лет назад

Would this fix my issue on my 2005 Suburban for the dial not showing as being in park? The shifter is in the park position, but the dash shows it as still being in reverse.

@phillysfishybusiness8875 5 лет назад

Read my comment

@MoeHabibi Год назад

Once install , can you take it out and re-install in another car with same model and year ?

@josesantana561 5 лет назад

Why is it so important to have the vehicle in neutral when doing this job?

@User-hi4ti 5 лет назад

That's how the sensor will know it is in neutral. It cuts power to the starter so you won't start in drive.

@michaeldose2041 4 года назад

It is important because that is how the new switch is indexed to begin with. In other words the tool thingie, in the new switch, is indexed to the neutral position. Take the old switch off in the neutral position , neutral position back on.

@mkmac9539 7 лет назад

I need to replace this switch on a 2007 kia sedona. Any advice on this model is greatly appreciated.

@sorizaga 5 лет назад

Thanks for the video....I just install my switch based on your tutorial.

@1AAuto 5 лет назад

+firstname lastname You're very welcome. Thank you for the feedback!

@larsclem 3 года назад

Whenever I have an issue I check out your videos. Thanks for doing such a good job explaining each step and showing them. Question: My son's 2004 Chev. Silverado (4l80e) drove it home no problems. Next day it started fine but will not shift into any gears. Truck will not move. Is it possible that it is the Neutral Safety Switch? He heard no grinding and no metal was in transmission fluid. I don't believe it is mechanical. I'm stumped. Any idea?

@1AAuto 3 года назад

+Larry C Thanks for watching our videos. It could be the neutral safety switch, but can't guarantee that. Your best bet would be to have it professionally diagnosed.

@theactualdarthvader 3 года назад

check the linkage. based on how your comment is worded i’d say check if the linkage popped off

@dyilandlord3518 4 года назад

I did this without removing the differential shaft.

@1AAuto 4 года назад

+Handyman Thanks for checking us out! 1AAuto.com

@MrCraigspencer 2 года назад

I'm glad my 2003 Chevy Coachman (3500 Express Van) safety switch can be accessed with no driveline or anything in the way. My next maintenance project.

@haroldtsosie1981 Год назад

You got a video for 1986 Chevy K20 neutral safety switch by pass or replacement?

@e.s.l5861 4 года назад

I reinstalled this after changing my rear main on my truck. Slow to register on the prnd, but never shows neutral..... which comes to be an issue when 4low is needed. I’m thinking this my help.... at least the front drive shaft will be easy.... heck, my white out hash marks are probably still even there .... :/

@watchinstuffx82 6 лет назад

Does anyone know if this part would cause the truck to read being in 2nd gear? This is what I think is keeping my truck from starting. I have an 03 Silvy 2500 with 2wd, Auto trans

@mrpotat680 6 лет назад

Aiden Pearce Either this or the computer.

@Soupie15 6 лет назад

I did mine on a 97 Chevy k1500. But now the truck has all the gears expect for park. I can manually put in park and the shifter will go to park position but the trans will not when u try to use the shifter

@user-pj9ox7yj2q 4 месяца назад

Will aceatoñe remove glue from saftyswitch

@itsbeenmacgyvered5916 2 года назад

Would this part cause the transmission to not function properly in drive and 3rd gear? How can you test the switch at the PCM to make sure that the C Solenoid is grounded?

@salley1518 4 года назад

What are the symptoms that this needs to be replaced?

@1AAuto 4 года назад

+salley1518 Symptoms of a Bad or Failing Neutral Safety Switch Engine will not crank in park but cranks in neutral. Engine will not crank in neutral but cranks in park. Engine does not crank at all, regardless of the transmission gear. Engine cranks in any gear.

@mikewheatley8082 6 лет назад

did you forget to heat plugs to make them fit in

@loveofchrist5808 9 месяцев назад

Great video but you guys forgot one thing what if I don’t have a 4 x 4 and I only have a 2 Wheel Dr. do you have a video regarding the 2 Wheel Dr. on how to replace that neutral safety switch on a Chevrolet?✝️✝️✝️🙏🏻🇺🇸

@1AAuto 9 месяцев назад

+Love Of Christ We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@hockeyplayer8372 Год назад

Will this affect four wheel drive?

@josesantana561 5 лет назад

Thanks for the video. What if the switch doesn't have the alignment tool? Is there another way to know the position the switch is in?

@1AAuto 5 лет назад

Thanks for the feedback! +J Santa

@jtoombs56 4 года назад

@J Santa, kinda late to reply so maybe you already figured it out but this is what I would have done. Plug the new switch into the wire harness before installing it. Put the transmission into reverse and leave the key in the on position. Now check to see if the reverse lights are on. If not then turn the position of the safety switch until the lights come on then while holding the switch at the angle it will mount, slide it over the actuator and mount it while keeping an eye on the reverse lights.

@jss6060 7 лет назад

So I just had my trans rebuilt, 4L65e, truck started perfect before I pulled the trans. Took it to a shop to have it rebuilt, put it back in and no start no crank. On the gauge cluster it doesn't show that's it's in park/drive/reverse.... it's not lit up at all. I'm thinking that it doesn't know it's in park. I'm thinking the neutral safety switch is bad, does this sound right? How do I test the switch?

@EGGINFOOLS 7 лет назад

Not sure how to test the switch. Just replaced my transmission in my GMC myself. Had the same issue, had to move the column shifter around to get the light to show which gear and also have reverse lights and lock the doors when moving. The switch was a bitch to get back on. I think I need a new one. Gonna try this.

@samuelfrancisco4364 6 лет назад

Hey Js c did you find out what the problem you having

@antonioduron7385 6 лет назад

Any news? Same situation

@AntoineFinch 4 месяца назад

Don't have one for 2010 Suburban LTZ?

@mechudo3 7 лет назад

thanks

@MrMatloo 6 лет назад

I just put up a 4l60e on my blazer truck and it will not start. the mechanic ripped apart the safety switch while trying to place it on the box. Then forced the plug out which ended up ripping every piece of the switch apart. He placed another used safety switch where piece of the harness was ripped. The truck cranks but not starts on P, neither on N. Is the safety switch the culprit.

@jameswilliams8252 Год назад

Can you show how to replace clutch safety switch on a 2000 s-10 how far fordwards it goes on the pedal cannot find any videos of this thanks

@1AAuto Год назад

+james Williams We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

@ericm5393 3 года назад

I have a 2007 Sierra , I did the the exact same thing . Now when I shift into drive my gear shifter looks like its in low one when its in drive .

@aaronrolewicz6097 3 года назад

Good thing you watched the suburban video 💀

@gerettroma7970 3 года назад

Is it the same process for an 03 5.3 Silverado

@samarmas5082 4 года назад

Why do you have to mark the drive shaft? Can you just put it back however you want to as long as it fits?

@1AAuto 4 года назад

+Sam Armas Thanks for checking us out! it is important to mark it to ensure the shaft goes in the same way it came out. If it is not installed in the same position it could cause an issue. Please let us know if you have any further questions, thank you!

@realtruth97 2 года назад

Does A1 auto sell wire harnesses for gmc trucks?

@donaldmcvey3197 7 лет назад

I ask google for how to take off and install neutral safety switch and got nothing for 98 Buick regal

@1AAuto 7 лет назад

+donald mcvey Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?RU-vid&CTA%20Comment& 866-403-3393

@dinceraltas6162 7 лет назад

donald mcvey ben

@elitreo55 5 лет назад

Thanks for such a detailed video.. question, since the Tahoe / suburban 2007 and 2008 still have the 4L60E transmission, can I purchase same switch (part number) and the location and procedure would still be the same ? -Thanks

@jow185 4 года назад

Just a real quick question here. I have a 2003 Chevy Avalanche Z71, it will start fine all the time except when the engine is hot. When the engine is hot if I turn the key to start it it will not crank. You will act the same way that it would if the truck were in gear. Wait 20 minutes, and the truck will start right back up. I noticed in the video how close the neutral safety switch is do the catalytic converter. Is it possible my neutral safety switch is it going bed and only won't work under extreme temperatures? Remember all winter long this truck will start just fine. But in the 90-degree dog days of summer, once I run it I have to wait till it cools down to start it again.

@1AAuto 4 года назад

+Joe W We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

@charlesjimenez6675 Год назад

I didn't look to see how old this post is but I have something you may want to hear . If you look on the dash before you turn your key all the way on, look to see if you're security light is flashing, if it is the switch is bad and it's above the ashtray and it's a b**** to get out . I have to wait 10 minutes just to turn it back on, it doesn't happen all the time though. This is my second 99 Suburban that this has happened to ..

@alanb287 6 лет назад

Thank you, this is a great video. I have a 98 VW Jetta that last week started giving me intermittent problems getting power to the solenoid when turning the key to the start position (it would take multiple tries). It is now a permanent problem. I verified no power is getting from the ignition switch to the solenoid. I verified the backup lights still work when I place the selector to reverse. Is it still possible the starting problem is caused by the neutral safety switch or could it be a loose wire somewhere? I cleaned all of the positive and ground connectors first to eliminate that as a possibility. I also do hear the starter relay being energized so I'm thinking the problem is with the neutral safety switch (and making me think it is placed between the starter relay and the solenoid). Unfortunately another problem is that the stud turns along with the nut when I try to loosen or tighten the nut on the hot cable from the battery to the solenoid.

@humbertron 7 лет назад

Guys I have an a problem with the selector position in the transmission under the hood, it is stuck or lock right know, I'm already replaced the whole transmission for that one with less miles and running (is what the seller told me) but I don't know if is an a solenoid or an a problem. Thanks guys.

@1AAuto 7 лет назад

+Humberto Ortega Thank you for checking us out. It could be a solenoid, but this would more likely cause a service engine light code. 1aauto.com

@humbertron 7 лет назад

1A Auto Parts thanks for the answer guys, ok guys but one solenoid can block the transmission right under the hood? I mean the selector shaft in the tcm. Can be a solenoid? I can pull the car and move like is in neutral. Thanks for your help guys.

@somaday2595 3 года назад

AT 2:36 - Loosen the bolts with an 11mm socket... Leave to GM to make such great choices. Who at GM designs this s% ? Same goes for the 18mm caliper bracket nuts. And one of these days a 16mm will pop up.

@MrCraigspencer 2 года назад

I hate GM truck engineers.

@jaybigjefevisiionz9824 2 года назад

What if your reverse lights won’t shut off would this still be the fix

@1AAuto 2 года назад

+Jaybigjefe visiionz We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@darkvode8520 4 года назад

I think gmc was on dope when the put that on a envoy cant remove them without breaking the switch ive tried two and cannot remove the harness

@cups3 7 лет назад

Old one had glue around connector, heated it up to remove, but does glue get on pins a prevent contact ?

@cups3 7 лет назад

I tried varsol but only made stuff sticky did not take it off any what would clean them ?

@obfuscated3090 7 лет назад

I use aerosol contact cleaner or aerosol silicone spray. Works pretty well.

@rickybrewer1075 6 лет назад

My transmission in my 1999 chevy Silverado 1500 4 wheel drive 5.3 engine speed odometer inoperable truck will not shift into 3rd or drive I have replaced the two sensor on the rear of transfer case speed sensors. part store hooked up and di diagnostic's they said it is torque converter clutch solenoid. I sure would like your advice.

@1AAuto 6 лет назад

+ricky brewer If it is throwing a code, and this is what the code is pointing to, you may want to replace the defective part. Hope this helps you out. 1aauto.com

@airgunningcolorado78 5 лет назад

You didnt mention the stupid glue on the two wiring connectors.... what's the proper way to reconnect the gooey mess? Heat up first?

@gerry7602 5 лет назад

Use a heat gun. If you don't have a heat gun a blow dryer will work

@bronsonstephens5799 4 года назад

I’m having a hard time getting the transmission range switch off. Any tips?

@bronsonstephens5799 4 года назад

Nevermind. I used a heat gun

@1AAuto 4 года назад

+Bronson Stephens Thanks for checking us out!

@rodger6940 5 лет назад

Does anyone know where is the neutral safety switch located on 00 biuck lesabre

@jesusbogard5281 3 года назад

What fault does the truck do when this part is wrong?

@1AAuto 3 года назад

+JESUS BOGARD If your neutral safety switch is having serious electrical problems, then your engine will not crank in park or neutral. The starter relay relies on the switch for receiving power. If it can't receive this power, then the starter motor will not be able to crank the engine.

@pedrobajonero6081 7 лет назад

hey can anyone help a bus early change my switch my ingintion was solve but the guy that scanner my express van 2006 told me that that sensor will also solve my gear shift problem forgot to mention that my gear box is stuck in first gear

@tammycrosby2291 6 лет назад

Can someone please tell me If a neutral safety switch for a 2007 impala is it on the inside or outside of the transformation

@MrMatloo 6 лет назад

all safety switch is on the outside of the gear box

@b_wilk98 4 года назад

What if my Truck is indicating that it’s in reverse while it’s in park could this still be at fault?

@1AAuto 4 года назад

+Brandon Wilkinson The neutral safety switch is a safety device that only allows you to start your engine when the automatic transmission is in either Park or Neutral. We recommend taking your vehicle to have a mechanic to diagnose. Thanks for the question!

@405ruben 3 года назад

Did you find the issue? I’m having the same problem, reverse lights come on when in Neutral but not in reverse. Cluster also doesn’t show that I’m in reverse

@gboydrog7342 4 года назад

Can this be done without taking off the shaft

@1AAuto 4 года назад

+gboydro G No you need to take it off.

@parales03 5 лет назад

Will this be the same for a 97 Chevy suburban k1500 4x4?

@michaeldose2041 4 года назад

Yes

@lsbrandon9312 4 года назад

Is there anyway i could find the wiring harness for this

@1AAuto 4 года назад

+LS Brandon We do not currently have the wiring harness for sale. Thanks for checking us out! 1AAuto.com

@yurislz 5 лет назад

Please someone help me I cant find the neutral safty swich in a 00 lesabre

@1AAuto 5 лет назад

+Yuri Slz Thank you for the comment! The switch is located in two places on the vehicle. Column shifters have the neutral safety switch located on the of the transmission. Mechanical floor shifters have the neutral safety switch located on the of the transmission.