Amazing Restoration of 30 Ton Hydraulic Jack | How to repair hydraulic jack 

And...that right there, gentlemen is where your Harbor Freight bottle jack is produced! 😂

А манжеты,интересно,тоже какая-нибудь контора штампует из переплавленых рваных тапок?))

It always amazes me how these guys have all this skill to do all this mechanical repair work yet none of them seem to know how to build a damn table for the work to be done upon

He was caught red handed! 🤣 Everyone seems to be commenting about health and safety but don't realise that sometimes nothing matters apart from putting food on the table. This man is doing what he needs to do to survive

I always come for the comments with videos like these, and I am never disappointed.

did nobody noticed that he also painted the pressure cylinder?

Всё в песке и земле хотябы верстак себе сделал.

Rozebrał, umył w syfie, poskładał na tych samych uszczelnieniach i wlał stary olej. Normalnie brawo.

Обслужить домкрат много ума не надо, а без ремкомплекта невозможно :)

Great video. Better to reuse and recycle or repair rather than dispose and replace. Very impressive rebuild. However afew concerns. 1) Once disassembled and cleaned he should have used the wire wheel on every component including the base. Or sand blast everything except the piston shaft. Then polish with the wire wheel and compound. Then he should have hung up all the individual componets on a wire then spray painted everything except the piston shaft. Then reassemble once components are dry and paint cured. Lastly it is not wise to apply any paint to the piston shaft. The piston needs to be left as a polished bare metal surface. Then lubed with oil. As the shaft goes up and down the paint will break apart and will wear out some of the seals prematurely and worst still paint chips can become stuck inside the bottle and contaminate the oil lubricant. This can lead to prematurely failure. And when it comes to bottle jacks prematurely failure can potentially cause death or serious injury. Otherwise very good build. I too was impressed with how clean be is and how clean his wardrobes were throughout the entire process. Even his hands were pretty clean. He definitely is very skilled.

I need to sell work tables in this dude’s country. How much more efficient he would be if he was standing! Kudos to this Cat! True Badass!

Imagine if these guys had a real parts washer at their disposal...

Руки не докрасил🤣. А так 👍👍👍 хороший ремонт!

This man doesn’t jack around! He is good 👍

Skill full Pakistani long live Pakistan 😊💪

Даа,просто поменять резинки.Но зачем он шток покрасил???

Fighting the life with great skills, feeding the family probably. My respect.

Never mind the incredible mechanical genius. How does he “sit” in this pose for so long?

The. Brilliance is not that he kept his clothes clean or could squat for hours on end, but where the hell did he get the seal kit???!!! Let alone the right one!!

what surprises me the most is how clean his clothes are with the dirty work he does is incredible

ماشاء الله تبارك الله لاقوة إلا بالله وفقك الله لكل خير ورضي عنك وفتح لك مغاليق العلم في هذه المهنة الشريفة 🤲🏼👍🏻👑✅🏆⭐🥇

Чувак живёт в домкрате, ест домкраты, ему снятся домкраты, и жена у него - домкрат.

These clever industrial people are the real environmentalists re use most things time and time again,,,, respect

He is the Jack of all trades ✅

Зачем шток закрасил?

A happy man doing what he knows best

Great job, no nonsense attitude on this.

Great craftsmanship, and there was a time in this country when we made products that could be rebuilt and reused before we became the land of aplenty so now it all goes to a landfill! Was there ever really a Sears and Roebucks? Or was it just a fantasy like Camelot on a hill?

ох эти любители покрасить шток

And not a single oil spot on his clothing. Amazing! 👍

If everbody got back to buying quality products that can be refurbished at the end of the life cycle land fills would be much smaller.

What a great video! Not a lot of us repairmen left in this disposable world. Skillful attention to detail. Well done my friend.

That guy is a craftsman. Good job.

Вот они где настоящие слесаря 👍👍👍👍👍👍👍👍👍👍

The best part is how he uses a spraygun to squit paint all over the thing, while touching the wet paint constantly. You might as well use a brush at that point...

😂 😂 😂 There are 3 chairs to the side like at the barbershop: you go in, wait, pay and then come out with the repair done right 👍 👍 👍

Good on him, just trying to make it like everyone else 👌🏻

Awesome right up to the spray painting 😂

How did I get here? And I watched the entire video 😄 If I saw him during a holiday I would have walked on after 10 seconds.

Respect from a worker from iran

I like the grinder sitting on the tire.

This guys always restoring things i wish we had guys that near me to restore things like that

My back hurts after watching him sit on a toddlers seat at a work bench that is essentially a floor. Trueley experienced craftsman.

Ti ammiro sei un vero maestro complimenti

Why do they hate benches. Surely the bloke next door is making some out of old coke cans.

Прямо за углом сидит чувак, занимающийся покраской, чуть дальше чувак, который печёт резиновые кольца, слева за зданием чувак, который делает всякие клёпки, чувак, который делает молотки потом чувак который выпаривает соляру и тд, не говоря о чуваках, которые качают воду, электроэнергию и тд.

Nice that he used the old oil.

These men can reuse and rebuild anything!! It's fken crazy. I need to get my damn skills up. Even me having these Milwaukee and crazy tools I don't come close too these guys!

The lack of basic human safety gear makes me sad. This video is amazing to see and I enjoyed the process but it physically hurts watching someone use a wire brush without eye wear after seeing what it does to someone's eye. Those chemicals have a VERY real and serious effect later on with repeat exposure. Raising my glass to all the heros out there who are getting the job done even though it likely means injury and suffering later on. I'm sorry.

I just think about what these people would be capable of if they had proper facilities and tools. The world would spin a lil faster.

Indians sped up sound like Jawas in Star Wars😂 Hooteeeenie!

Bravissimo il meccanico, il verniciatore lascia a desiderare.

Gasoline with water back to earth .Very ECOLOGICAL . Bravo

Imagine all that skills , and proper equipment, steel toe boots, gloves and a good working table!!!!

He takes pride in his work. Good job sir

Ремонт выполнен отлично 👍

Молодец мужик, на коленках сделал и все работает!

Красавчик! Видно что на совесть делает

Iam impressed, this skilled individual could do this in his sleep..great video 👍

جميل فعلا أحسنت صنعا عزيزي ربي سبحانه وتعالى يباركلك ويوفقك دائما مع خالص تحياتي وتقديري واحترامي

The amazing part isn't the work or completed product. The amazing part is how these people squat like that for that amount of time!! That's amazing.

Именно это и есть забота об экологии - дать вторую жизнь инструменту, а не выбросить его на свалку, загрязняя землю. Именно этому надо учится европейцам, а не всякой зеленоэкологичной хрени. .

Hard working, talented man !!!

Надо отдать должное мужику,при всей той грязи в которой он это делал,все же он старался промывать детали перед сборкой.

Thank for sharing knowledge.

One must wonder how big the demand for crappy hydraulic jacks is, that they have a whole shop for them

He is master of his trade. We can make out how perfect he is in his work.

I learned how to remove roofing and then installed roofing for 35 years with very few companies. Same principle. Enjoying this video!

Mantap dongkrak yang kuat 👍👍👍👍👍👍

Selamat beraktifitas kawan... Semangat... 👍

These jacks are rated like 2,5,10,20 tones and so on. A while ago bought two 10 ton jacks. Tuev „certified”. CE sign on other shit. After first use and far away from 10 ton load, one started to leak and compressing back. While its made like shit, it costs 20€. While you can't repair it desently for that price, it goes to scrap. Thats called competition, but its not to increase quality, its for reducing price. Not many people will pay 50 € for jack, which will work for life, but many will pay 20.

Эти ребята умудряются на коленке выдавать качественные вещи не хуже чем на заводе 😊

They should sell them in pairs, a Jack and Jill. Adorable❤

أحسنت 👍👍تابع ❤🇩🇿 بالتوفيق إن شاء الله

I was wondering if he was gonna paint it. He knows his way around a jack and a snack.

Skills 👌🏻😎

MORE OF THESW VIDEOS THEY ARE AMAZING WATCHING THESE GUYS FIX ALL KINDS OF THINGS WITH NOTHING. RESPECT FROM THE USA

Вижу пакистанца в тапках перебирающего 30тонные домкраты - неглядя ставлю лайк👍

no fancy tools at all! this good man...knows his stuff!

Very smart 😊 Amigo,you should monetize all your videos and make some extra money for all the great things you can do😊 greetings 🇲🇽

Amazing work!! Good job!! Hi from Buenos Aires Argentina 🇦🇷🖐️

Bu zor şartlarda sanatını konuşturmak bu olsa gerek vallahi sonuna kadar helal olsun🫡🪂

He’s gonna crazy when he figures out we got gloves and closed toe shies

He might want to try cleaning up his workshop once in while. Especially the immediate area where he he is re-building the jack.

can someone please explain to people that tables have already been invented 😂😂😂

La sculele pe care le detin acesti oameni sunt niste genii!!!!

Fast worker. He knows his craft. Protect your eyes, sir, when using the grinder.

I wonder how much they cost and how much profit is in one.

Excellent video! This video gives me the confidence to rebuild my leaking jack. I can do this! Everything he did, I already do. Including rinsing solvent off in the storm drain and painting out on the city curb. Heck, as I write this, my city curb is mostly Allis Chalmers orange as well.

❤❤❤باشکوه استاد گرامی وعزیز بسیار عالی وهزاران لایک تندرست وشاد باشین ..من هم مکانیک سبک وسنگین هستم ❤❤❤❤❤❤

What shocks me is that this guy can make a living fixing jacks in a little street side shop.

Imagine being told this is a restored jack while underneath 😅😅😅

Imagine going to work in flip flops and pajamas to weld old hydraulic pumps with no mask on

Salutari frumos video felicitări pentru realizare 👍🌍

Молодец мужик. Твоя работа достойна восхищения

This man has alot of skills 👍. Thank you for sharing this video. 🇺🇸

The guy answering the phone can be heard saying "STOP CALLING! There is no one named Jack here!!!"

Узбекистон Привет Нарманли

Good job 🙌

He worked so hard to repair it just for the other guy to spray paint on the pressure cylinder😅