B Series Cable to Hydro Conversion -PT.1 

The clutch is not installed...

Yes. Dm me on Instagram

@@ThatParadiseEj1 can i get the video too ?

I'd suggest the Goodridge clutch line

I actually pulled the system off another car already bled. If I had to bleed it again I'd properly use a vacuum bleeder

@@ThatParadiseEj1 we tried that but with the bleeder facing down it makes no sense on how im supposed to get all the air out

I've heard you can crack the line fitting to get the air bubbles out there but I'm not sure that'd work

Yes

Ek have hydraulic operated clutch already

@@hilux22reyes but if you buy a cable trans you still have to do this

94-01 Integra. Unfortunately I got a da one first because of misinformation in the Honda community

ThatParadiseEj1 oh ok cool thanks for the Info cause I was looking around on what to use cause I also have a b16 cable transmission that I’m going to put in my del sol but I didn’t know which Tbracket to use.

If you have any more questions you can dm on instagram

I removed the plunger and used the stud mentioned in the beginning of the video. It's a intake manifold stud.

@@ThatParadiseEj1 ok got it thanks

You can't bleed it through the nipple you have to bleed it through the line fitting that connects to the slave.

@@ThatParadiseEj1 How did you figure that out? I'm about to do the same on my swap.

If you send me a dm on Instagram I'll give you the rundown of what you need for the swap 👍 works great so far.

@@ThatParadiseEj1 Just did.

Same

Not yet, still need to do some things before the engine goes in.

Car is running and driving. I can report no issues. Works great