Blacksmith's flatter from mystery steel - part 1

Подписаться 330 тыс.

Просмотров 38 тыс.

50% 1

A viewer sent my some great big pieces of round bar from an industrial jack hammer bit. Watch as I take this mystery steel and forge in onto a traditional style blacksmiths flatter. A tool used for smoothing material.
Thank you for watching. Black Bear Forge is a small one person shop located in Southern Colorado.
If you would like to take a more active role in the production of these videos, you may provide financial support through one of the two links below.
www.paypal.me/BlackBearForge
Or you may set up a monthly contribution through Patreon
/ blackbearforge
I have set up a Facebook group just for my RU-vid channel.
If you would like to share your work that was inspired by my videos
This is the place to do that
/ 101400907400310
Find my shop on line at:
www.blackbearforge.com
www.blackbearforge.etsy.com
/ blackbearforge
/ black-bear-forge-20986...
If you have something you want to send my way you may do so at:
Black Bear Forge
P.O. Box 4
Beulah, CO 81023
The following list provides just a few resources to help you find supplies and equipment for blacksmithing.
These first links are affiliate links, which means I earn a small commission if you buy from these dealers.
My blacksmiths apron www.Forge-Aprons.com use code BBF
My favorite cordless angle grinder - www.anrdoezrs.net/links/885600...
My cordless die grinder - www.anrdoezrs.net/links/885600...
To find more information in blacksmithing in the US or to search for your local ABANA affiliate group visit.
www.abana.org/
Other suppliers of blacksmithing tools and supplies
Self contained air hammers - www.saymakhammers.com/
General blacksmithing supplies - www.oleoacresfarriersupply.com/
General blacksmithing supplies - www.piehtoolco.com/
General blacksmithing supplies - www.centaurforge.com/
General blacksmithing supplies - www.blacksmithsdepot.com/
General blacksmithing supplies - www.blacksmithsupply.com/
Square head bolts and lags - www.blacksmithbolt.com/
New anvils - www.oldworldanvils.com/
New anvils - www.nimbaanvils.com/
New anvils -
Industrial supplier - www.mcmaster.com
Tong blanks and tools - kensironstore.com/
Fire brick and refractory - refwest.com
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 128

@TheKrisg50 3 года назад

“Is way more fun.....”. Words to live by.

@zanejohnson8512 5 месяцев назад

I always like watching your videos. You are a very skilled and knowledgeable person. Your shop would be Disneyland for blacksmithing beginner.

@kimcurtis9366 5 лет назад

I REALLY wish you had been doing videos 25 years ago, before I became disabled and can only do small stuff! I have learned SO much from you! YOU are a great teacher and one who KNOWS his stuff! GREAT video! Thanks for your expertise and knowledge!

@BlackBearForge 5 лет назад

I can't imagine how bad those videos might have been.

@demastust.2277 2 года назад

@@BlackBearForge They would have been horribly awesome.

@tobyjo57 5 лет назад

Just goes to show how much some of us viewers appreciate your tutorials John. Good of that guy to sent you that hunk of stuff.

@Jason-jd1jv 5 лет назад

After watching your videos and taking your advice and hints, I have been able to successfully forge weld with no problem. I forged a very small spoon to scoop flux with and after taking your advice to use less flux, I find that forge welding is actually quite easy. So far I've only forged small pieces folding back on themselves but my confidence grows with each effort. My work has greatly improved with the information I've gained from your videos and for that, I am grateful. Thank you for taking the time to make these videos. You have no idea what a great teacher you are and what a huge inspiration you have been to me. Keep up the good work and I hope to learn many more things from you in the future.

@grandadz_forge 5 лет назад

Now that's a big stash of tool steel!

@stephenheadings4789 5 лет назад

I've watched a ton of your videos. I try my best to incorporate your lessons into my forge work. And you know in a different life you would have made one Hell of a knife maker.. love your work keep them coming John!!!

@kambranictay1 5 лет назад

Dang your a tough dude. After one swing with that sledge I would need oxygen and a coffee. Was great to see you using the press. As always 👍🏼. Thanks Steve for hooking John up 👍🏼

@bennyhill3642 Год назад

Very cool. Thanks steve!!!

@johndilsaver8409 5 лет назад

It was really a pleasure to watch you forge that!

@NeilGraham.I.M.F 3 года назад

I will say it is kind of strange watching you use the Press. But I enjoy it. Just as good of a watch the second time around

@BIGDOGFORGE 5 лет назад

Thanks John I really enjoyed this video. Keep up the good work. And congratulations on the channel growth, awesome job sir.

@TomokosEnterprize 5 лет назад

You sure do get some odd mail eh. Oh well it does keep you busy eh. LOL. It's going to be fun to see what comes out of this. You are going to need a Brinell tester one day fella ! Great post fella !

@BlackBearForge 5 лет назад

just one more piece of equipment I don't have room for

@TomokosEnterprize 5 лет назад

@@BlackBearForge LOL, I hear you my friend. I have never seen a shop that was big enough, EVER. You do a great job with the space you have good sir !

@RayFromTheHayclan 5 лет назад

I'm enjoying the series on top work tools. As soon as I get done building enough tongs that's where I plan to start, next these videos will be very helpful.

@SamTownsBladesmith 5 лет назад

This was a great little build, I look forward to seeing the end result! I have followed your channel for years and I really enjoy your approach to the craft and the community! Keep it up!

@danielcrawford7315 5 лет назад

Mr. John, the info I got is subjective to actual analysis of course. So that said it should be a high boron steel that oil quenchs. The 2 steels I was told that are in the common range are: SAE 15B35H OR 30Mn5B. Now that's at least a starting point. I am told the boron steels are shock resistant and highly wear resistant and deformation resistant. So I could see that from an industrial jack hammer bit with a carbide or tungsten tip fixed to it like rock teeth on a trencher or excavator. Hope that helps some boss. Super interesting video i really like where your going with this flatter hammer. Blessed days sirSir, Crawford out

@waltparkhurst2494 5 лет назад

Thanks John another inspirational video for us up coming Smith's. Your videos have help me alot. And thanks Steve for hooking John up. God bless

@danielcrawford7315 5 лет назад

Mr. John, I have a lead on the steel waiting on the info to come back. I think you'll find it interesting. Get it back to you as soon as I get it. 😁😁😁 Blessed days sirSir, Crawford out

@Zogg1281 5 лет назад

It looks like you're going to end up with a really good looking flatter at the end of this, the picture at the end is really flattering! .......... sorry, I couldn't resist 😊 Keep up the good work

@hannemannironworks1651 5 лет назад

Looks like the flatter is coming along very nicely John!

@jjppres 5 лет назад

Looks really good John! Anxious to see the final result.

@krustysurfer 5 лет назад

Burly Billet! love seeing the magic happen! you can make so many things after figuring what kind of hardening to use, great to learn from you, thank you again B.B.F

@bunyanforgings7849 5 лет назад

I don't know .... I keep having flashbacks to the Terminator movie every time I see John using the hydraulic press.

@ronthacker211 5 лет назад

Always impressed with your experience and knowledge.

@Jeremy-iv9bc 5 лет назад

Great channel! Thanks for not adding a bunch of obnoxious music to your videos. I just love hearing that power hammer eat!

@OuroborosArmory 5 лет назад

Another great video! Thank you

@jimhumphrey 5 лет назад

That is too funny. I should think industrial!

@mattmiller7499 5 лет назад

Good to see you having fun in the forge!

@NeilGraham.I.M.F 5 лет назад

Looking good

@lenblacksmith8559 5 лет назад

I really enjoyed that John, going to be a lovely flatter I reckon.

@williamjacobs4274 5 лет назад

Great job as always. Thanks. And can't wait to see how it hardens.

@alwayslearningthankyou2708 5 лет назад

Great video! Like your straight forward style of instruction.

@steelpennyforge5152 5 лет назад

Wow! That is some serious mystery metal! Really looking forward to part two!

@hendersonhandmadeironwoodc8881 5 лет назад

Nice work John,Thanks for the demo.

@chrisschroeder775 5 лет назад

That's a really good video. 👍👍

@3870TheDad 5 лет назад

Great video on how to make a tool!!!

@peterelliott2232 5 лет назад

John, thanks for the video. We have one of those swages and I use it all the time, very handy.

@reneemills-mistretta790 5 лет назад

That's a great gift. It's going to make great hammers!!

@mikemeinders6717 5 лет назад

Nice looking Apron John I like the design on it...

@workwithnature 5 лет назад

Was about to say s7 John. Is what my ASO JCB jackhammer turned out to be. I think it was work hardening. Yeah one day I will have to get a power hammer & press like that. Just amazes me how fast the material moves. The flatter is looking good, will be interesting to see the oil quench if it turns out to work on the test piece.

@Tiffany_Turbo 5 лет назад

Your video cuts/edits kill me but I wouldn't change it for the world. Love your videos! Thanks for the content and keep up the great work!

@BlackBearForge 5 лет назад

You should see the uncut and un edited versions.

@interlinkplus8236 5 лет назад

Man those power hammers (especially huge ones) always sort of creep me out! : ) The way they move is almost other worldly, like it has a mind of it's own.

@russelbutler6704 5 лет назад

Can't wait to see it finished. Looking great n can't believe you've never made 1 before. I just got a hammer bit from a scrap yard but it looks like it will be the anvil for my treadle hammer as it's 130mm round and 1060mm long. 5 n 1/4 inch n 42 inches long I think. But there was a second 1 so next time I'll see if it's still there.

@honeycuttracing 5 лет назад

"I hope it's not fragile" LMFAO😂🤣😂🤣😂🤣😂🤣😂

@reigninoel 5 лет назад

Never underestimate postal workers' ability to break... well, anything, really.

@honeycuttracing 5 лет назад

@@reigninoel I agree fully on that lmao

@TheWoodsmanMilling 5 лет назад

@@reigninoel it was actually in one piece before it was shipped!

@bryanrobinson1980 5 лет назад

"Mystery Steel Tool Making" series!!

@levi743 4 года назад

Amazing how much heat a press takes out.

@sjsblacksmith1693 5 лет назад

I see I wasn't the only one screaming in my head, and yelling at my phone, "Why is he dinking with the new hammer, when he should break that round down to a rectangle with the press!" I kinda understand, I love power hammers too! But I recognize the utility of a press, and I suspect that the press is the better tool for turning a puck into a hammer/tool blank. Even with an extra reheat, unless you are using a Nazel or a larger mechanical? I find the Saymak chokes just a bit on bigger bites, it's great for sneaking up on a pieces, and fine for tooling, but for just chomping on thick sections with just the big flat dies, it can't compete with a decent sized mechanical, and it sure isn't a Nazel or a steam hammer...

@zetsevs 5 лет назад

I do love that in blacksmithing fixing something involves bashing the living daylights out of it

@TheWoodsmanMilling 5 лет назад

That's how I try to fix everything

@TombstoneHeart 5 лет назад

Yep, there is nothing on Earth that can't be fixed by just using a bigger hammer.

@prepertruckin8525 7 месяцев назад

⭕️ hey John, I jus found out that those jackhammer chisels are a 42cro steel...

@ErokowXiyze 5 лет назад

Thunk! Hopefully it isn't fragile. Haha!

@robertlunsford1350 5 лет назад

I have a piece of industrial jackmhammer bit about 8 inches in diameter and weighs over 100 lbs. I use it for an anvil.

@thomasarussellsr 5 лет назад

Appears to hold the heat fairly well. And I think your press might be a little low on fluid, that's a fairly heavy lull before it starts squeezing. Looks pretty cool.

@BlackBearForge 5 лет назад

Its a slow press to start with. But it could be low on oil plus its really cold.

@stanervin6108 5 лет назад

My guess is S5. 🐾🔥⚒

@jd70HJ19 5 лет назад

HOLE RAM BIT ... Hydraulically driven off a backhoe or excavator ... probably a 20 ton force HOLE RAM

@brianderby145 5 лет назад

John this may help with a bit of the mystery.....this is a repost of a repost that I found from a guy that made breaker bits. Found the following post on the iForgeIron website by a gentleman named Grant Sarver Posted 03 October 2010 - 05:35 PM "Having been a manufacturer of paving breaker steel for many years, over time, I had spectrographs done on every other manufacturers steel. To the best of my knowledge, the only time an "S" series steel has been used is for specific applications and usually that was only .680 chipper steel. These are a commodity product and the finished tool sells for less than the cost of "S" series steel. For most of the last century 1078 was manufactured specifically for this purpose. Essentially a high silicone 1080. Brunner & Lay (the largest bit manufacturer in the world) uses a modified 1045. Vulcan used 1078 for most of a century and more recently switched to 15B40, a boron steel much like 4340. This steel will spectrograph as 1040/1045 because the boron is minute and often overlooked. I made millions of bits from 8630 and 8640 steel. Many chipper steels are made from 9260, an AISI grade very close to S-5 in chemistry. Junkyard rules apply. OBTW: "Jackhammer" bits have a hole down the center. Paving breakers sound exactly like a percussion drill (jackhammer), hence the modern misnaming."

@brianderby145 5 лет назад

At 3 inch dia I'm gonna guess it came from a skid loader or track hoe hammer

@BlackBearForge 5 лет назад

Interesting data, which leaves the possibility wide open

@khalidalhadidi6402 5 лет назад

Thank you very much to share this knowledge, would like to get some courses related to metallurgist do you recomand institute for full course.

@lisacoppinger8448 5 лет назад

Hello John, great video as always. Did you make the knife you used to open the box?

@BlackBearForge 5 лет назад

No, one of the viewers sent that to me

@craighall6468 5 лет назад

Do a part 2

@BlackBearForge 5 лет назад

Shot today but may not upload until Sunday or Monday

@airgunsandsuch9139 5 лет назад

Still Dr. Phil

@texastaterbug5395 5 лет назад

The press is a little more neighbor friendly than a power hammer!

@BlackBearForge 5 лет назад

That is very true

@larryking606 5 лет назад

Another great project , What would a flatter cost , out of that metal ?

@BlackBearForge 5 лет назад

Hard to say until I get one completed and see if its a good tool

@larryking606 5 лет назад

@@BlackBearForge I understand completely , Sorry to bother you , I know you are a busy Man ! I will gladly wait until you have had plenty of time to work on again ! Thank you for the quick reply ! Have a Blessed Day !

@stageforgejon905 5 лет назад

I was going to reface my anvil,I priced a piece of 01 3/8× 4× 15! They wanted $220 for it! That's more than what I paid for the Anvil!! Any other suggestions? If not I'm not sure what I'm going to do! It might not be worth fixing I don't know!! Can send pics of it,just don't know where to! Love the hammer video! I hope to get to something like that on my anvil some day

@BlackBearForge 5 лет назад

Many people use hard facing rod meant for adding wear protection to plow blades. It is time consuming to weld up an anvil face, but it can be done.

@stageforgejon905 5 лет назад

@@BlackBearForge thank you so much for getting back with me! Keep on ⚒️ ing my friend!!!

@goshnodo 5 лет назад

You ever look into the gun I commented about few videos back to test metal?

@BlackBearForge 5 лет назад

I looked online to see what they were and nearly fell on the floor when I saw the price. That explains why I have never seen one in this area. Our scrap yards are more like junk yards selling random stuff by the pound.

@goshnodo 5 лет назад

Black Bear Forge yes, that is the downside. really something only for say it Recycling Center..

@billwoehl3051 3 года назад

Do you have a stop or a mark in the drift so you know how deep to go?

@BlackBearForge 3 года назад

No, I just judge by eye and drift until the hole looks good. Then trim the handle to fit

@ninelivesforge6432 5 лет назад

why is there such a delay with the press when it runs into resistance? it's quite significant, i'm looking to obtain a press in the near future, and that is something that i definitely want to avoid

@BlackBearForge 5 лет назад

The big reason is that it uses a two stage pump, as most presses do. It moves fast a low pressure but then slows way down to develop the higher pressure. But it is also very cold and the fluid doesn't move as well in the cold plus I am probably in need of adding some more fluid

@mrmedeval4 5 лет назад

What kinda gloves do you we’re thanks

@BlackBearForge 5 лет назад

My most used style are hot mill gloves from Pieh Tool

@garethbaus5471 4 года назад

World's heaviest duct tape.

@garethbaus5471 4 года назад

The good part is you have plenty of material to figure out decent a heat treat for it

@billwoehl3051 3 года назад

Does the S in the S series steels stand for "Shock resistant"?

@BlackBearForge 3 года назад

Yes

@roundman-1972 5 лет назад

new to blacksmith work. are you adding flux when driving the punch on the power hammer if not what is it and why?

@escapehatch5998 5 лет назад

I believe he is adding coal dust as a punch lubricant so he can get the punch out easily.

@reigninoel 5 лет назад

He's using plain old coal dust. It helps prevent the punch from sticking by forming a very fine layer between the punch and the workpiece.

@BlackBearForge 5 лет назад

Just what has been said by the other comments. Coal dust helps keep the punch from getting stuck.

@roundman-1972 5 лет назад

@@BlackBearForge ok that makes me wonder this then, if you are using propane instead of coal then what?

@BlackBearForge 5 лет назад

There are commercial pinch lubes. But coal dust from anyone that uses coal would be pretty easy to get. A pound would last years.

@callmenortnortin467 5 лет назад

Excavator hammer shaft?

@billwoehl3051 4 года назад

It's been a year since you made this video, but using alcohol or acetone to remove the duct tape residue would keep your forge from stinking 😜

@paulcorrigan649 4 года назад

What does glass hard mean?

@BlackBearForge 4 года назад

It means it is nearly as hard as a piece of glass. To hard to be useful and very brittle.

@sjsblacksmith1693 5 лет назад

About lubes other than green coal dust... Jock Dempsey over @ secure.anvilfire.com/forge-ease-3512.html sells Fuchs Forge Ease. It's manufactured for industrial applications, but it works great in the home shop too. It really is a great product, and you can use it easily on other tools, not just punching holes. You dip the hot tool in the lube, the water flashes off, and leaves an alkaline coating on the tool. The lube really improve penetration of the tool. You get more bang for your buck with the liquid forge lubes. You used to be able to get a product from Henkel that was really good too, but the Fuchs is available and actually a little better. The tool needs to be fairly hot, to make the water evaporate out of the solution and leave a nice coating on the tool, but not too hot. If it is too hot the lube won't actually stick to the tool. I do a lot of slitting and punching and love my forge lube. I always cool the tool in the lube before I put it away, then the next time I am punching or using my favorite running chisel, I use it long enough to get it fairly hot, then I dip it quickly it in the lube. You don't want it to come out cold and wet, you want it still hot enough to flash the water off. That way you get a good coating, and then just cool the tool every few hits like normal. The only time I bother with green coal dust is if I am punching a particularly deep hole in a piece of steel, like on a hammer eye, or punching a hardie hole in a sledging anvil, then I use coal dust in addition to the liquid forge lube. The out gassing of the coal as it is compressed and combusted in the hot hole helps jump the punch back out which is nice. I still get better penetration if I use the Fuchs forge ease in addition to the green coal dust. I have tried lots of the other lubes, like beeswax, and moly grease mixed with graphite, but I think the liquids like the the Fuchs and the Henkel work better.

@BlackBearForge 5 лет назад

The only problem I have had with some of these lubes is that once the punch is hot they tend to burn off quickly. Otherwise I have found them quite useful

@jonsey3645 5 лет назад

Very inexperienced and uninitiated question, is the comparitively low amount of scale during forging any indication of what metal you are dealing within? I could never say thank you enough for your guianance and demonstrations. Please take the question as it was meant, I'm not a smartarse, lounge chair Smith... just thankful for any feedback. May the power of Thor be with you... lol

@BlackBearForge 5 лет назад

Interesting question and one I have never really thought about. I suppose it would require a metallurgist to say for certain.

@jonsey3645 5 лет назад

@@BlackBearForge Thanks Man, really.

@amgironworks9091 5 лет назад

If you want some pretty hard stainless to play around with let me know I'll send you some.

@BlackBearForge 5 лет назад

Thanks for the offer, but I don't do anything with stainless

@amgironworks9091 5 лет назад

@@BlackBearForge ok well if you change your mind and want to play around with it let me know. I have probably 15 1 1/4in by about 2.5 ft pieces. They come from an adjustable stem and seat used in the oil industry. I took the stuff to a local metal store and they x-rayed it and it came out as 431. I made my first Hardy cut tool out of it and it seems to be holding up pretty well.

@521cjb 5 лет назад

Fifty four pounds, eh ? Lol . You do know your postal carrier hates you, right ?

@BigWillSD 5 лет назад

LMBO!!

@BlackBearForge 5 лет назад

They might be getting used to it, I know the UPS guy is

@newtsleatherandmetalsmithy1827 5 лет назад

Good day to you brother I have a couple of questions about your apron that would help me make one that I can donate to young aspiring smith. One, the badge over the pocket is it a thicker veg tanned piece? Two, do you know what type of leather is it made of? I recently made one for miss Penny Brown over at new penny forge out of a pig skin suade that works very well but I aspire to improve my skills with each and every project I do. I can be reached either by my you tube channel or face book under the name Randy Mills

@BlackBearForge 5 лет назад

This one is a commercially made apron from Forge-Aprons.com made from coy hide, the logo pocket is vegetable tan