BMW E92 335i NEW Leather Steering Wheel Cover - CHEAP Re-trim

Подписаться 56 тыс.

Просмотров 28 тыс.

50% 1

BMW E92 335i NEW Leather Steering Wheel Cover - CHEAP Re-trim
This is the item i purchased, keep in mind it is only for the msport steering wheels, however the seller does have options to suit nearly all BMW models. One you have placed your order with mewant you need to confirm all the colour and material options. bit.ly/3mcRixK
Check out our membership area for unique perks and benefits:
/ @zeroto60tube
Check out the full playlist on this car - bit.ly/2xc0EoA
Budget Build Parts List So Far
Turbos through eBay
RHD UK/Australia - ebay.to/2PKAgId
LHD USA/Europe - ebay.to/3hN9awQ
Turbos through Amazon
17T RHD / LHD Listing amzn.to/3efnoDQ
19T LHD amzn.to/2VZuV3i. (these are slightly bigger then mine, i wish i got these)
19T RHD amzn.to/2ZXg0Ib (these are slightly bigger then mine, i wish i got these)
2 Inch Inlets - ebay.to/33Qi9ZJ
Gecko Coilovers - ebay.to/3jrUIeI
Rocker Cover - amzn.to/33caOBd , ebay.to/2TIRQyZ
-10an Line & Fittings Kit - ebay.to/31GFsCB
Trans Cooler - ebay.to/3gOkbxy
Elder Coils - ebay.to/38Izq5R
Billet PCV Valve - ebay.to/3aS7NJg
China Spec Walbro 460 F90000267 (use at own risk, but that is whats in this car currently - update the second pump in the stage 3 setup, failed straight away) - amzn.to/33fqYZ4
LCI Tail Lights - ebay.to/34KQc3L
12mm Bolt On Spacers - ebay.to/2XRRKah
E92 Custom Floor Mats - ebay.to/2CkgEaX
Smoked Side Flashers - ebay.to/2XPyVEk
Clear Side Flashes - ebay.to/2PMkMUi
My port injection was secondhand. But i may switch to a PI manifold shortly.
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com

Авто/Мото

Опубликовано:

10 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@Peterpetty1 3 года назад

Good to see you haven’t given up, getting the little jobs done, really enjoying the e9* stuff, as I have a e91 wishing one day I could do mods like this

@Wheelsanstuff 3 года назад

That’s one I don’t have the patience for. Nice work, glad to see the build continue as things get sorted.

@jamesrobinson1579 3 года назад

Not bad! I did my E83 wheel last year and also removed it to do the work from my couch instead of in the vehicle. I used the tri-colour thread and I have to say it is less forgiving because it stands out! I had exactly the same issues you did, plus I found it was even more wrinkled when I finished because I got more confident with how tight I could pull the thread (as you mentioned). That said, I have used leather conditioner on it several times, and also the heated steering wheel function, and after a year, it has completely tightened up! I might not have noticed, or just thought I got used to it but my daughter got in the X3 the other day and asked if I had "got rid of my home sewn steering wheel and bought a new one" LOL. WAY cheaper (several orders of magnitude) than the professionally refinished wheel I bought for the M3, and looks 90% as good LOL

@heyhayhay247 3 года назад

I did this on my E39 540i M-Sport in suede, and it turned out pretty great. There were a couple of spots that weren't 100%, but it was vastly superior to the worn factory leather and added some thickness to the wheel. On my E60 though, I'm just going to order a wheel from Coby Wheel.

@seanissomething 3 года назад

Fantastic work mate!

@RomeoGoesRetro 3 года назад

I did this in my car, while the steering wheel was in the car! Great way to update the wheel.

@ZeroTo60Tube 3 года назад

I'm two minds as to whether it would have been easier in the car or not.

@Saif0412 3 года назад

I messed up mine, 🤦‍♂️ took it to a steering wheel retrim specialist to get it done. Great update either way. I need to replace the side indicators with LED ones and the, rear lights as well. Should be getting the Billet custom paddles Monday from Nelson racing wheels 😎

@royconnolly9809 2 года назад

very good video, it looks great it has gave me the confidence to tackle it myself lots of great tips thank you

@Saif0412 3 года назад

I think you did a pretty good job Andrew, I'd sand down and respray the plastic trim on the wheel. Remember to cover the M logo 😉

@jonjohns7080 9 месяцев назад

Bro this is great that’s for sharing this I’m totally doing it

@AndreasKahl 3 года назад

Nice work, I knew it would really improve the look of your wheel. I bought mine direct from Mewant, their videos on RU-vid can help with tips on the install too.

@zippy545 3 года назад

got one of these on Amazon in the US from MEWANT, could not be happier. Got alcantara with no stripe and 3 color stitching, what a fun project

@ZeroTo60Tube 3 года назад

How long has yours been fitted?

@dariousturner9264 3 года назад

I did this on mine as well, same brand about 9 months ago and it has held up really well. But the best part is the way the steering wheel feels in your hands now, definitely worth it.

@ZeroTo60Tube 3 года назад

It’s made the Msport wheel feel more firm. And the leather is soft like the new f series wheels

@amhodoz2205 2 года назад

@@ZeroTo60Tube Hi! is your model Black smooth Artificial leather on top and bottom+Black perforated Artificial leather on both sides+Black thread?

@vancesolinap6917 3 года назад

They also sell one with m-colored stitching. Great vid overall!

@HassanEido1 3 года назад

I did that to mine, can't recommend it enough! Awesome job

@ZeroTo60Tube 3 года назад

How long did it take you? This was nearly 4 hours for me.... while watching the occasional youtube video.

@HassanEido1 3 года назад

@@ZeroTo60Tube it took me about 2.5 hours on the 335... I had done it a few times for my E46 so had some experience ... Like you said the genuine leather is the one to get!

@br4d101 3 года назад

I think when pros do this they use steam to make the leather a light more pliable also knock the stitching down with a small hammer as makes it flat! Good job though I’d of ruined that if I’d of done it!

@g.wes.3906 3 года назад

Or I have seen them use a really thin plastic to make moving it into position much easier.

@mitchanderson 3 года назад

For a little bit of safety when pulling the wheel off, it’s sometimes worth using the bolt in or nut on if the wheel is stiff so when you try pull it off you don’t cop a wheel to the face 😂

@MrCybergladiator 3 года назад

Good work. Better job than I could have done.

@ZeroTo60Tube 3 года назад

I’m far from skilled at this type of thing. It’s was easier than expected, but still I messed up only focusing on the front alignment.

@robertkowalski8146 3 года назад

Good job 👍

@pigeoncatcher1 3 года назад

Steam will help leather stretch and help remove creases.

@azcarpetco3461 3 года назад

I read that you want to switch to a PI manifold. I just received my Phoenix racing manifold from Burger tuning. And it’s awesome excellent quality.

@ZeroTo60Tube 3 года назад

I wish freight wasn’t so much from BMS. They look like such a nice manifold

@docgramps1 3 года назад

I didn't even know these covers were a thing! Awesome! Wouldn't worry about the wrinkles, unless you have many people sitting in your footwell?

@ZeroTo60Tube 3 года назад

Haha

@alhoward101 3 года назад

Clear!

@pugs1377 3 года назад

Looks like it turned out good. Did it bulk up the wheel much? I like the thickness of the e90 wheel. I may get this for my e39. The e39 wheel feels a bit thinner

@ZeroTo60Tube 3 года назад

To be honest not noticeably. The wheel is very thick on an e90 and this stretches quite a lot. You can just see In the video the new leather is thin enough for it show the original seams underbites it.

@juniwalk 3 года назад

115 AUD for professional retrim in nappa leather here in Czechia, no way I would do it myself :)

@ZeroTo60Tube 3 года назад

Oh wow!

@bronxbmw625 3 года назад

I see that you have a valvecover link from Amazon have you tried that one i need to replace mine i think from as i m chasing some 29e0 and 29e1 codes thinking i have a crack in the cover i never touched the car and i have owned it for 80k miles and its at 184k

@ZeroTo60Tube 3 года назад

Yeah, i fitted the valve cover about 6-7 months ago. It has been fine. I just ordered another one for my spare motor.

@Melbournerider 3 года назад

Looks amazing. Might find a cheap wheel to practice on with my e39

@ZeroTo60Tube 3 года назад

I think that would be a brilliant idea. I think the next one i do will be pretty much perfect. In fact i just ordered the alcantara version for my other wheel.

@HassanEido1 3 года назад

@@ZeroTo60Tubeheads-up the Alcantara is no good. They call it black suede or something . I'd cancel that order 😅 it goes bad very very fast and develops fuzzy clumps that are insufferable. At least that's been my experience

@ZeroTo60Tube 3 года назад

Good to know. How much was the black suede one you tried?

@HassanEido1 3 года назад

@@ZeroTo60Tube its listed at 43$but perpetually on discount at 29$

@shoepacr1 3 года назад

CAUTION! THERE ARE 2 MORE SPECIAL TOOL SETS YOU NEED! When it comes time to re-install the cam ledges, it's imperative that u use a "cam ledge alignment set" also during this process, you will need a tool that holds 2 of the valve springs compressed as to not put any load on the cam and cam ledges during install and torque process. I found that the valve timing set was easily procurable, while these other 2 sets were MUCH more expensive, and harder to find. Some may say you don't need them, but I have seen 1st hand the damage done to cam ledges and cam shafts when they weren't used.

@rueben68 3 года назад

Looks great maybe you’re just a bit too picky lol. Great vid

@ZeroTo60Tube 3 года назад

Maybe when it comes to my own work.

@iRestoreGadgets 3 года назад

one of the 2 things i will never do, the other one being vinyl wrapping.

@ZeroTo60Tube 3 года назад

This is definitely easier than wrapping. Both require horrific amounts of patience. This was just appealing enough since I could watch some RU-vid while I did it

@davidmarion9178 3 года назад

Use steam to smooth it out.

@joesaric1 3 года назад

the bottom where the 2 pieces of leather meet should cut the edges as close to the seams as possible, so it is now too thick at the joints.

@ZeroTo60Tube 3 года назад

Good tip

@mustafay4427 3 года назад

Where’d u get the steering cover

@ZeroTo60Tube 3 года назад

I’m away from my laptop, but there is a link in the description.

@iG4MERs 3 года назад

In Germany, it is about 100€ to get completely new leather on your wheel - makes no sense for me to do it yourself if even the leather is 45€. 55€ to get it perfect and don't do anything besides installing...

@ZeroTo60Tube 3 года назад

Labour must be cheap in Germany. You're lucky.

@iG4MERs 3 года назад

Labor is expensive, but there are so many people doing it on the side (not their main source of income, where they are insured etc..) which drives the prices way down.

@iG4MERs 3 года назад

You used Paddles from the BMW X1 Wheel on you E92, right?