Build A Shed Door Instructions

Подписаться 31 тыс.

Просмотров 32 тыс.

50% 1

Build your own Shed, Garage or Barn doors. Here is how to build a shed door instructions. Have fun building.
Learn how to build your own home and save thousands of dollars.
www.howtobuildyourownhome.com
We will walk you through the process with videos and checklists so you can feel confident as you build your new home.
Facebook Group
/ 367334194377670
One of the BEST General Contractor in Southwest Utah
www.kelschconstruction.com
Real Estate in Utah
www.isellutahhomes.com

Хобби

Опубликовано:

3 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@jbnielsen00 2 года назад

Finally… someone who does it right! :) I’ve seen so many people (including contractors) make the mistake of placing the diagonal brace starting from the top hinge location instead of the bottom… which has always resulted in a sagging door or gate.

@HowToBuildYourOwnHome 2 года назад

I have seen that mistake also many times. I have built five of these doors over the past few years and they remain really solid.

@rustyaxelrod Год назад

Kinda complicated geometry, done accurately without a bunch of math. I like it! 👍

@HowToBuildYourOwnHome Год назад

Thanks. If I can build a template for a future cut as I build, I am for it.

@chrishellelaniece9175 2 года назад

Thank you!

@lannieglass7535 Год назад

Thank you! This is what perfectly follows the other video

@HowToBuildYourOwnHome Год назад

You're welcome!

@RefuelintheWord 2 года назад

Great video!

@lonnieclemens8028 2 года назад

Excellent video! Thank you for sharing this information.

@HowToBuildYourOwnHome 2 года назад

Glad it was helpful!

@saramynarcik8179 Год назад

Thanks for the video. Been trying to design a set of doors for my shop/stained glass studio that has a 10' x 9' opening. This should work great.

@HowToBuildYourOwnHome Год назад

Glad I could help!

@joeamato3936 Год назад

Thanks for this. I had this idea but wanted to see it play out. My opening is 10x10 and will have two doors. Hoping a 5x10 door isn't too much. I added a double king stud along with the double jack stud when framing on the off chance I had to do this. Hope this provides enough support.

@HowToBuildYourOwnHome Год назад

Third door i have built like this and I never have any sag.

@gmfigueroa7 10 месяцев назад

Thanks for sharing. I actually need to build a 5ft wide door as well

@HowToBuildYourOwnHome 10 месяцев назад

You can do it!

@mandi2154 2 года назад

Keith, I am very grateful to you for this video, and the prior one, ‘#9 Build your own garage door and save money’. It would be helpful to know where we can find these hinges, and a massive latch that accepts a padlock for the door, I have never seen them even at the local farm stores, that look that sturdy, or possibly brand names of the hardware, as this is something I need to do at my little place.

@HowToBuildYourOwnHome 2 года назад

Glad to help. Those hinges I found at Home Depot. Bottom shelf area. Look for the weight rating. these were rated at about 80 LBS for each hinge, so I used four of them. Found the latch at the same place, although many ACE Hardware stores have a good selection as well.

@BigAlWillis 2 года назад

Only thing I'd add is the center bolt on each hinge be something other than a lag bolt for security purposes because someone could just unscrew the bolts & they're in. Other than that excellent video & tips, thumbs up.

@HowToBuildYourOwnHome 2 года назад

Great point. I once installed some custom wood doors for a commercial client and he wanted bolts hinged on the outside and I warned him about the easy access to unscrew the bolts and someone is in. He did not care.

@BigAlWillis 2 года назад

@@HowToBuildYourOwnHome I just rebuilt a shed for the neighbor , re-sided the whole thing & rebuilt the door entirely. I used some of your tips to make it strong & short work of it. This vid really helped out. Thanks

@Woody59er Год назад

Great Video. I want to open up my shop but prefer the look of 2 doors. Really like your design have you ever build 2 side by side, wondering how to deal with the gap in the middle. Also have to finish with hardy plank to match the rest of the house. Thanks

@HowToBuildYourOwnHome Год назад

Yes I have. In another video way far back, and much bigger doors as well.

@dennmillsch 5 месяцев назад

I'm not seeing how mice will be prevented from entering the shed by squeezing under the door (they only need about 1/4"). This could be solved by having the door overlap the top of the floor and having the door shut tight to close off access. Having stops around the sides and top like you do probably stops mice entry there. But it looks to me like the bottom of the door could be a mouse entry point.

@rickgarcia1392 2 года назад

So what size is the opening. It’s hard to tell and didn’t hear him mention it. If that’s a 10’ wide opening. Would it be better to build two 5’ wide double doors instead.

@HowToBuildYourOwnHome 2 года назад

Just under 5 ft

@vilsan.r.9875 2 года назад

is there a better option other than installing the hinges outside? I find it useless, if a thief wants to brake in quietly all he has to do is unscrew the hinges.

@HowToBuildYourOwnHome 2 года назад

Yes, if a thief is that smart. There are hinges now that cannot be tampered with. These are like them. I always like to bury the hinge with trim, one way to hide the obvious.