BUILDING THE ULTIMATE GARAGE PRESSURE WASHER DETAILING WALL! 

WORKFORIT Keytags are back in stock! www.workforitapparel.com

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ru-vid.comUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

That will make it easier to detail. Keep'em shining.

I JUST picked up this pressure washer! Waiting on my cox hose reel as it's backordered with the mount, but I really liked that you showed how to make the entire shelf unit. This is perfect and I think a MUCH better solution than spending $120 on a s/s metal shelf that the pressure washer sits on. One thing that people do NOT mention is that since you used wood it will actually dampen the noise of the pressure washer compared to a metal shelf which would amplify it!. Can't wait to use my 630 TSS this weekend for the first time.

I love that setup wouldn’t mind having that at my home honestly would be amazing

Obsessed Garage for your hose. He has all the cool stuff, and watch his videos if you want to take detailing to the next level

Love all your Milwaukee tools, and your truck and love the videos

Another good video bro! Keep up the good work! I look forward to watching your videos everyday!👍🏼

I LOVE WORK FOR IT!

Thank you Ryno you rock

Thank you for inspiring me to get off my butt and do something that matters in my city. Love everything you're about and the message you convey. Hope to see you chris and Dave up at FLOGFEST this August! Keep it up brother!

This is awesome Ryan I'm literally going to build one now!

This turned out to be a nice set up

Turned out to be a nice set up

Obsessed Garage for ypur fitting s too

I mounted mine using a french cleat system. Made it very easy to get it up level and not struggle with it.

You could always add some fairly heavy duty (short) springs with thick washers on both sides, under the pressure washer to absorb some of the vibration you will get if it's directly mounted. Pads will work too probably but might not work for long if you use it too frequently. I'd definitely try and go with SS braided hose as well. This setup is going to be sick. Great job.

Please make more content like this. It’s awesome to show your skills in craftsman ship. Although I do like videos on the truck these videos top it

Great video 👍 👍

Great videos

Great vid as always. I did a similar install on my channel. Stoked to see videos of cool garage setups.

I'll be making this in garage soon 😁

This has the same effect as watching your bbb build videos. Can’t wait to see the warehouse done.

I came to your channel for truck content, but I have to say I really enjoy all of your content man. keep it up!

Wedges are life i use them for my ac units on concrete pads

Please be sure to record when a leak from the high pressure hose sprays all over that electrical panel 12 inches away. And then the reaction when you find out the insurance company isn’t covering that claim because it wasn’t built to code. Should make for plenty of “likes!” Placing rubber spacers between the wall and plywood AND under the pump will help reduce noise vibration. Good tip with the rubber paint. Great job on the build.

with two or three caots the roll on bed linner turns out pretty good and doesnt look bad

Cox hose reels are worth the money. I have one with my pressure washer setup

Nice job fellas! When do we get to see Tahoe project?

that is a great build. 'im gonna extract some ideas from your video and construct my own

DOPE!

Saw you looking at a truck from lime ridge. I've heard nothing but good things from that place! I can't wait to see the future cateye

Gonna be sweet!!!

A W126 Mercedes in background ?! THE MAN HAS STYLE !

Love all the videos. Btw(first)

Can you make a video on your tools and how you keep them organized

You could use braided hose wrap to cover the green hoses. Basically the same stuff you'd use to cover hoses under the hood of your truck.

Oh dang almost missed the Martinez hammer. This man knows quality, very appreciable

Hydraulic hose and fitting shops also carry those type hoses. You can have them made to length needed also they can replace the ends on the hoses.

You'll like using hot/ warm water to wash with. Warm water cleans better.

@dmaxryno you’re totally right! If you can make boring chores easier to do then they almost do themselves!! Well, not in that way... Good work tho, looking forward to see how your car wash station works out 👍🏻

I loved Christopher when he was on Storage Wars.

I just set up my pressure washer to. Like seriously just looked at my phone n got the notification.

15:22 super good advice, Ryno kind of blew through it though.

Warm weather is back business is rolling. Almost ready to spend some money on your tanks and t shirts for summer work shirts. Wish you sold cargo pants/shorts

Could you do a review on Chris’s work truck?

Ryno the wear house is looking good

I go to a local hose shop that will build nice goodyear water hoses at any lenght. Its H and S hose up here in Bakersfield but I am sure there is a place down there.

Found the AR 630 at a lower price on Amazon. Just not the hot water one. Scroll tru the models and you will find the one for $594 . Thank you for the great ideas, need to find a good set up to wash down my work truck Ford F-550 and the Family vehicle’s.

3:09 The BOAH challenge. Arthur Morgan from Read Dead Redemption 2 approves lol. "Where's my pressure washer, BOAH?!"

Great video. I am getting ready to order one tank and am thinking of how to mount my pressure washer and you gave me an idea. I have a electric Ryobi pressure washer have had it for about a year and it works great and it's small.

Obsessed garage is the place to get detailing products and pressure washer materials

Hey Rino house your day? Love your content lately keep it up!

Very nice setup... HUGE garage! How do you plan to deal with the water evacuation in the garage? I don't have any drains in my garage so I wash my vehicle in the driveway.

Have you thought of a system like CR for DI water?

I was the first likeeeee and awesome scooter😂😂

Hey RYNO, any chance we can get a red white and blue small decal like the one work for it hat? Would love to get a few and support

I just orderd my hoodie today

13:15 Lmao! Chris just being lazy!

Going for a little bit of OG Obsessed Garage Action!

more projects!

PVC? I would run copper. Then again, I am a guy with high standards. Also, your patch hose from that outlet to the pump inlet can be done with black rubber hose that you can probably buy in bulk at a hardware store and install either crimp brass or just some standard ends and making one of those ends a 90 degree going into the pump. The same could be said for the outlet, a 90 degree fitting, if it works going down to the hose reel.

Do 4’ branded washing machine hoses I’m sure you can get them in black or silver

Have you considered getting an air blow dryer to dry your truck?

We use redheads on foundations on our toe then the rest anchor bolts most of the time around doors are lintels or finished basements

Sweetaaaa

One small note on this particular model if you walk away for more than 5 minutes you need to turn the unit off to avoid overheating. I'm surprised the warranty is only for one year, hope you have good luck with it.👍

If you want a shut off valve on the pvc use a true union ball valve. Use them all the time at work. Really the only time i have one leak on me is if the oring wasnt seated properly, plus if it does leak you just unscrew it and put a new one in

Use stanless steel washer mashine hoses

Is that a Hart WOODY framing hammer? I thought I was the only guy with one still

what type of di tanks are those and filter indicators?

Use a steel braided washer hose instead of the green ones

Is the pressure can use a foam cannon?

I’m still hearing Chris’s whistle due to the price tag on the pressure washer. Haha.

Washing Machine Hoses, you can get them in black or stainless.

Ryno, you need to get ahold of obsessed garage.

What about steel braided lines from a clothes washer?

definently would make a miny boundry wall/stopper on the shelf the washer is on so it doesnt dance its self off of the shelf while outside an using it

Plz get a OBS chevy or GMC for a little project daily

So no more buddy washing your truck anymore? Great vid bro. Man one of these days I'm gonna get me a diesel any way man keep up the sick vids my guy.

Damn drank your coffee! Talking fast! lol

Dude I have grey medical grade hose ! For your application

I saw that crooked line, with my naked crooked eye!! :)

Future reference the Krenzle 1322ts is the best for detailing puts out 2.3gpm whilst keeping 1100 psi best u can get and its pretty much the same price as that AR blue

Try the shark bite ball shut off valve

My pressure washer has the exact same wand and I purchased a threaded quick connect fitting that attaches to my foam cannon so you don't need to purchase a different wand.

How tall was the plywood cut to? You mentioned the width was 2 feet.

you should see if you can get some AN fittings and some steel braided hoses that would look SUPER cool but maybe to much $$ for what you willing to spend. just an idea though

Why the sunglasses inside home depot and the warehouse Chris??? Have you been hanging out with Dave? Redeye

Use steel braided washing machine hose. Comes in various sizes and is more durable in the event of hose failure. Less likely to flood you out. P.S. I’ll take a WFI hat instead of my $10 bux.

My cheap harbor freight electric power washer also shuts off when you let off the trigger....

How much PSI would you recommend for an electric pressure washer for cleaning my aluminum wheels on a mercedes s550? I see some say online that you can harm the car if the pressure is too high.

If you take the feet off the pressure washer you can bolt the pressure washer to the shelf so when your playing basket ball the ball doesent knock it off I know it’s heavy but all it takes is that right angle and better safe then sorry

The hose reel, is that connection point fixed or does it rotate once you have a hose connected to it? When you were turning the system, it looks like it continues to spin with the handle. Looks like that will be an issue if that's true....

Does that fitting on the hose reel swivel? I noticed it was rotating when you were cranking it, and that would mean you’d have to disconnect your whip when winding up your hose. Also make sure your whip is pressure rated to whatever you are running your washer at.

@dmaxryno I was reading up on that particular pressure washer and it's got a siphon hose on it for 'detergents' and automatically mixes the correct amount of water with it. Curious to know if that will eliminate the need for the foam cannon all together.

What microfibers are those! I’ve been trying to figure out which ones josh uses on your truck and for his business

I have to say my first concern was in the opening shit when you indicated where you wanted to mount everything. Does the electrical panel/breaker box next to your pressure watcher not worry you? I had hoped to see how wet it became under operation bb.

Use some black wire loom to cover the hoses.

Need a diablo blade on that small saw cuts way better