CHEVROLET CRUZE KNOCK SENSOR REPLACEMENT LOCATION. CHEVY SONIC KNOCK SENSOR 1.8

Подписаться 970 тыс.

Просмотров 137 тыс.

50% 1

CHEVROLET CRUZE KNOCK SENSOR REPLACEMENT LOCATION. CHEVY SONIC KNOCK SENSOR 1.8
In this video we will show you how to remove or replace the knock sensor on Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. This video may cover Chevrolet Sonic knock sensor replacement since they share the same engine. We demonstrated how to remove and replace the knock sensor on Chevrolet Cruze with the 1.8 engine.
We showed you how to remove and replace the knock sensor on a 2015 Chevrolet Cruze but this video should be helpful on:
2008 Chevrolet Cruze Knock Sensor Replacement Removal
2009 Chevrolet Cruze Knock Sensor Replacement Removal
2010 Chevrolet Cruze Knock Sensor Replacement Removal
2011 Chevrolet Cruze Knock Sensor Replacement Removal
2012 Chevrolet Cruze Knock Sensor Replacement Removal
2013 Chevrolet Cruze Knock Sensor Replacement Removal
2014 Chevrolet Cruze Knock Sensor Replacement Removal
2015 Chevrolet Cruze Knock Sensor Replacement Removal
2016 Chevrolet Cruze Knock Sensor Replacement Removal
2012 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2013 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2014 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2015 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2016 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2017 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2018 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
2019 Chevrolet Sonic (Holden Barina) Knock Sensor Replacement Removal
► Knock Sensor: amzn.to/2xRQeum
►Fuel Line Disconnect Tool: amzn.to/2Wjs5Eq
► Tool Set: amzn.to/2TCHRca
► Panel Removal Tools: amzn.to/2tfiEZD
► Screwdriver Set: amzn.to/2tbcI3W
► Electric Screwdriver: amzn.to/2VeMFJP
► Coolant: amzn.to/2V0rTbN
► Reverse Torx Socket Set: amzn.to/2LlQpEH
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@AutoRepairGuys 5 лет назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@pilsnercha 4 года назад

Auto Repair Guys GARBAGE

@mcfx3480 3 года назад

No need to remove the intake. Just use a wrench. I used a 10mm offset wrench, even though I had an actual E12 wrench too, the 10mm offset one worked a little better - was easier to get it on in a limited space. That bolt is aluminum and it's not very tight, so you will not round it. It comes off very easy. The whole job took me less than this video - only 3 bolts and a connector. Don't forget to disconnect the battery too - there's a starter and an alternator near the knock sensor, so you don't want to short anything accidentally. Don't tighten those bolts too tight when you put it back together - they can be fragile.

@Junior454productions 2 года назад

Was just about to come on here and suggest that haha

@RealRickCox 2 года назад

I can confirm that you DO NOT NEED to remove the intake to switch out the knock sensor. Removing the intake is a massive waste of time and could possibly introduce new problems if you don't get everything back together correctly.

@ralphrussell2883 11 месяцев назад

I agree. I just did this using an E12 wrench. If you have big hands, it's a pain to get the bolt back in to mount the new sensor but it's doable. That said, I love these guys videos on everything you need to do on your Cruze. Thanks for taking the time to post these.

@FoXracer5090 13 дней назад

So I don’t need to drain my coolant?

@Bill76913 5 лет назад

I just changed a knock sensor on my wife's 2013 Chevy Cruz. I looked under the car and found the Knock Sensor but since I am not a mechanic so I decide not to start taking things apart until I knew I had the time to follow your directions. I couldn't get to it until the following weekend. In that time I kept thinking about your statement that some people take off the bolt with vice grips or channel locks. It occurred to me that if they get those tools up in there why couldn't just use a regular crescent wrench. There was really no room to leverage a regular crescent wrench loosen the bolt. Then the thought came to me that I could probably use a Ratcheting Box Wrench. So used a 3/8 ratcheting box wrench and had the bold off in laterally 10 seconds. So that saved me hours of work I probably would have screwed up. Not to mention that I could have done that the week before. Just thought you should know.

@1UpTroy 4 года назад

So that bolt is 3/8 on the knock sensor?

@finger_man 2 года назад

@@1UpTroy ⅜ ~ 10mm. 10mm should be a more snug fit.

@Statelinescratcher 2 года назад

It's absolutely mind blowing that you would do all that work for 1 bolt when a wrench would be less trouble. This is a 40 minute video. I could go to the parts store, get an appropriate torx wrench, come back and take out that bolt without having to do any of that work. That's exactly what I'm going to do. I only came here to find the location of the knock sensor, so you did help me there and I thank you for that, but this is waaaay too much work for a $30 part.

@gustavorodriguez848 4 года назад

Easy fix , just did my sons Chevy Cruze , socket and extension . You can reach it from the top. The only thing is to not let the bolt drop when removing, like I did😳, no big deal .Then discount plug, reinstalling was a bit tricky to line up bolt with hole, extra hand was nice to have. Went back together pretty easily. This video is dumb talking about,draining coolant, taking off fuel line ,possible fire, crazy ,not necessary . Thank you guys for the comments because initially I thought it was a hard job ,bur after someone commented about how ots not hard,I looked closer and said,,what the heck is he thinking.

@hellblaise79 Год назад

How can you reach it from the top? first look I couldn't even see it from above

@tannerdee9815 2 месяца назад

Easy to see with a mirror but that clip sucks

@whatitreallylookslike Год назад

I just did this repair on a 2013 Chevy Sonic, but I didn't remove ANYTHING from the engine. At 2:29 in the video, I removed those 2 screws holding a black bracket that he said you need to loosen. Behind that bracket is the knock sensor as mentioned in the video. I used a multi-point box end wrench to remove the bracket and the knock sensor. An e-torx socket will not fit in that space as he said in the video to remove the knock sensor, but a box end wrench will. The sensor was not very tight and it came out no problem! I was done in about 15 minutes max.

@Greengoblin2345 4 года назад

So instead of just using a wrench you decided to take apart the whole car and flush the coolant system?? A lot of extra work ...

@pilsnercha 4 года назад

Connor Jones this guy is a fucking moron

@1mrsleepy1 4 года назад

I have to agree

@aoooxl9859 3 года назад

I'm here thinking the same shittt..unless the customer asked for all that to be cleaned out but STILL NO.

@HummBabyBaseball 2 года назад

Just changed it out in 30 mins using a 3/8 wrench to get off the sensor and e10 socket for the bracket bolt. Just had to remove small bracket with 2 e10 bolts first which was very easy. A more experienced DIYer could do this in 15 minutes.

@CalebTomaschefsky-Youtube 2 года назад

I changed this knock sensor in 5 mins. Wish I would have taken a video. You can get to the bolt without removing anything.

@CalebTomaschefsky-Youtube 2 года назад

I take that back, it was a 1.4L

@michaelmorrow9927 2 года назад

@@CalebTomaschefsky-RU-vid i have the 2014 1.4l turbo, is it in the same location and easier than what he is showing?

@CalebTomaschefsky-Youtube 2 года назад

@@michaelmorrow9927 easiest knock sensor I've ever replaced.. make sure you buy the sensor from the dealership though. Went through 2 brand new sensors before finding out they won't work.

@michaelmorrow9927 2 года назад

@@CalebTomaschefsky-RU-vid ah ok, so the ac delco and duralast are no good.

@ETPAK Год назад

I did knock sensor today in 15 minutes. I have torex wrench which works like a charm.

@Whiskey-is-life 4 года назад

I watched a guy change the sensor in about 20 minutes from the top without removing all that shit but I guess that’s how you soak people for more money

@qbaker617 3 года назад

Where?

@jonbender9110 3 года назад

What's he going to take out now the back seats and the rear tires and maybe even the radio when all you had to do is use a combination wrench on the sensor bolt

@tinapolis643 3 года назад

So if I need to change mine I could just use a wrench and save myself the problem .of everything after the first five minutes

@ykdavid 3 года назад

8mm fits on most of the Torx bolts and 10mm fits on the bolt holding the knock sensor.

@311g Год назад

Haters gonna' hate. Did you do more than you needed to? Sure, but that is a matter of experience. This is a great video that at least shows where exactly the part in question is and how to replace it. I'm happy to skip to the relevant parts for that info. It's also nice to see that someone other than me overcomplicates a problem (more times than I care to admit).

@tkizzle4129 Месяц назад

Is this the same on a 1.4L cruze as well? 2011?

@elfusser2532 2 года назад

Thank you man!!!

@ubaldosgomeztapia7244 3 года назад

Thanks my friend

@goranmilic2449 4 года назад

What is the reason for changing the knock sensor, what mistakes did the car make?

@maxtorres8218 3 года назад

Hey, I dont know if you care anymore seeing as your comment was a year ago, but my car started using more gas and misfiring a little then the check engine light came on. I checked and it was this sensor. It's for proper ignition kinda. But it should have your car be a little less wasteful and not jerky.

@misaelvillagomez5830 2 года назад

Can a bad knock sensor cause some knocking noise in the engine cuz my started making loud noise after the code p0324

@stillboutit 5 лет назад

Do you have to remove intake manifold before replacing this knock sensor?

@stillboutit 5 лет назад

I asked because I'm afraid of touching gas lines

@chaunguyen-ey7oe 5 лет назад

@@stillboutit I think he try to show off. I think it has enough clearance for the tool to remove the bolt.

@Crinklyjoint 5 лет назад

@@chaunguyen-ey7oe it does not I am currently working on my sonic right now

@Crinklyjoint 5 лет назад

I found a E-torx E12 Wrench on Amazon and it fits in there without taking anything else off just finished my knock sensor replacement

@ericjudd3137 5 лет назад

Ya he is nuts for removing the intake for 1 bolt

@lisas7805 Год назад

I'm sorry, I did battery install on an assembly line for a hot minute! That battery will not and can not hurt you nor will it work as long as the negative, or black cable, is off the battery. The negative cable should always come off first and go on last. The only way you'll get hurt is if you create a "to ground" connection across that positive terminal. That will only occur if the ground is connected. I would do a demonstration for the new guys; I'd hook up only the positive cable and when I would tighten it up with my wrench, I'd hit that wrench on the frame and act like it shocked me! It was freaking hilarious!

@PIRONSK8TV 2 года назад

Gracias loco

@REYMARTZHD 2 года назад

I saw another guy remove the air box and disconnect it from the throttle body and then pry/push away the intake parts behind the knock sensor to get enough room to go in there with a ratchet and loosen the knock sensor screw.

@dancurrier6421 Год назад

what size motor is that one it's not a 1.4 turbo the value cover is different then my 1.4 Lt turbo engine

@stephenhill4305 2 года назад

My Battery is underneath the rear seat, how do I disconnect it? Also this video doesn't match my 2017 Chevy Cruze. The oil fill cap is on the left side of the engine towards the back.

@davidmezera 2 года назад

How do your hands stay clean and you wear gold ring and watches?!! How!!! My hands are dirty always instantly!!!

@JamesWhite-tg4kw 33 минуты назад

What year is this car

@alexvaldivieso5126 5 лет назад

when i use the scanner show me p0324 knock sensor

@WorldWideMediaGroup1 3 года назад

Mine did to

@rubenlopez6607 4 месяца назад

With Hope somebody can help me with this I have a 2013 Chevy sonic I’ve already replaced one oxygen sensor when I drive the car it drives rough. I also noticed when I turn off the car and I’ll drive the car for a good 15,20 minutes, my overflow will start bubbling and then the water disappears. I’ve checked my dipstick no water in the oil. I checked the rear tailpipe no water coming through there. I’ve had my thermostat and my water pump replaced, but I did not replaced the other O2 sensor connected to the Cadillac converter has anybody had this problem? If so, can you please tell mewhat the problem could be thank you

@anthonywagner1556 6 месяцев назад

Why would you remove intake ? It's not that hard . You have the right equipment it should be no problem

@alexs.9405 4 года назад

I replaced the knock sensor and correctly put the new one on and im still getting the P0324 code.....?

@datshit5132 3 года назад

How did you get it fixed? I'm having the same problem.

@queenbee8622 3 года назад

A problem some have is they didn’t go to dealer and get GM knock sensor for a few more bucks

@mistrfixit987 2 года назад

just use a 10 mm wrench to unscrew it.. ive done it a million times

@markprickett9268 Год назад

I replace mine on 2014 Chevy Cruze didn’t need take anything off got underneath the car

@honoriocacharro603 3 года назад

How to buy knock sensor chevy cruze 2010 model manual transmission.tnx for your aswer!

@johnarcher6617 3 года назад

Ladies and gentlemen Stop! this is way to much work for practically nothing. Here's what to do.step One: put you car in Ramps and secure it, step 2: disconnect the battery and let the car kool down. Step 3 go under that car and reach behind the motor depending on your model size of screw varies. Location underneath (38:51). Step 4: remove and replace. I recommend OE, ACDelco or better!. It may be a bit different but it worked. Use a small wrench with an extender to reach it you've have barely enough space to do this. (i drive a 2018 Chevy Cruze LS 1.4 engine.)

@zzman131211 4 года назад

Ok? Ok!

@alexanderromawac1036 4 года назад

Hey bro, I had my chevrolet cruze 2012 and I got a problem with the driver side door sensor, it can't be open by touching twice the door button but it works when I touch to close the door, please share me some idea how fix this issue.. Thank you

@pilsnercha 4 года назад

Alexander Romawac don’t listen to this moron I he don’t know shit I changed the same sensor last night same car in 15 mins without taking anything apart

@user-ss6sp5wu7m Год назад

Is there a location for ignition sensor

@elipsonj Год назад

Man you didn't need to remove the intake, come on!.. that's a lot of work for nothing.. All you had to do is use a 10mm gear wrench, a swivel one,, that's it..

@ericjudd3137 5 лет назад

Why didn't you Just use a flex or something lot of work for one bolt I would of figured something out instead of putting the intake off for 1 bolt

@pilsnercha 4 года назад

Eric Judd this guy is a fuckin moron I did same job same car took 15 mins did it from top didn’t take anything apart

@vinleyoyaro9285 3 года назад

I just had my knock sensory on my 2013 Cruze . It was done within 20 minutes . Dude her is doing too much . I guess he is trying to show us he knows car parts and how to take them apart

@queenbee8622 3 года назад

Make sure to put in GM knock sensor from a dealership. Made that mistake

@byronmc8744 3 года назад

Really? I just got mine replaced 4 days ago, and I went back to the shop because the check engine is on again, I guess the sensor was from Autozone instead the OEM… thanks for the info

@queenbee8622 3 года назад

@@byronmc8744 yeah the one I put in from autozone didn’t do the trick. A mechanic from the Chevy dealer said I needed to put the GM in. Finally fixed it and the dealer part is only $30 vs $20 so not much higher

@nicholashuddleston5618 3 года назад

Did the GM one fix it bc I've replaced 2 now with the cheep ones from AutoZone and they come back on like a week later

@queenbee8622 3 года назад

@@nicholashuddleston5618 same I replaced mine 2 times as well with autozone censor with no luck before I was told by an expert to put dealer part. Fixed it for 7 months now

@nicholashuddleston5618 3 года назад

Was your code P0325?

@michaelmorrow9927 2 года назад

curiosity, it's obvious they would make a tool to extract that, that does not require all this work as it is only an approximate 96-114 repair. anyone know what the tool is. to do everything this vid is showing a mechanic would charge 1,000 bucks lol.

@rockville34 Год назад

way too long for a simple five minute job. No removing anything. Good try. Practice camera usuage.

@brandonjamessharp 2 года назад

God! Just tell me the socket size for the damn bolt. Why did you remove all of that shit? I can literally reach down and touch the thing. You must get paid by the hour.

@alarm1439 5 лет назад

Ewww Chevy Cruz... One of the worst cars ever!

@jodessa9019 3 года назад

I have one it’s been treating me good a few problems here and there but I’m looking for a new car any suggestions, (don’t want any new ones they make them to not last)