Connecting 2 2kW grid tie inverters with limiter in parallel. Power source - 23.5kWh LiFePo4 bank. 

Thank you. I've been waiting for a video on this!

Good video again. Very interesting that you needed to switch the aero connector wires

I have been searching for a clear explanation for almost a year, 🙏🏾 THANK YOU 🙏🏾

Very nice! Great explanation too! Thank you!

Great video thanks. Would love to build a power wall like yours.

Good job my friend... Here's my full support for you... God bless.... #solar lover

Great video thank you. I also have two of the units. May try your method

good to know ! di you ever extend your limiter sensor? if yes what cable should i use to extend it? because i have to put the inverter like 25 yard from my smart meter

I opened up my GTIL inverter and found it has a very clean layout inside. So I would open the new inverter and physically reverse the pins on the "Internal" limiter connector from the inside. That way, the two inverters have uniform polarity on its internal limiter port which will greatly reduce confusion later. There is a RU-vid video showing the GTIL inverter with its front case removed and it shows the sensor connectors from the inside: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vaPt-OTQk4.html This video also shows a "hidden" connector in the GTIL inverter that allows you to *directly* control the inverter's output via 5k potentiometer or via a microcontroller if you want to implement your own governor -- something I might do later.

Как хорошо, что нашел это видео! Давно думал, можно-ли так сделать. От ввода протянут один провод, второй лимитер было-бы очень трудно поставить, дого думал, можно-ли вот так разветвить? Спасибо!

Excellent tutorial! Just what I need. Question: You have to manually set the menu options in each inverter to be the same right? There is no master/slave arrangement? Specifically, I'm wondering how would the input-side "current limit" & "voltage limit" work if these values are set differently in each inverter.

i did this too like 3 years ago but i had nothing but problems, sometimes it seems fine then other times it puts to much power to the grid or way to little, it was real random, i found just having each unit use their own clamp sensor was more reliable, i just have 4 clamps all on the same main cable but spaced slightly apart, then i used normal cat 8 ethernet cable to extend the length by 30m

Thanks for this tutorial. Very nice. Like other asked if there is a way to configure Master / Slave unit. I wonder if both unit continuously monitoring load and decide to send equal amount since they are watch in real-time would send too much power in one leg.

Thank you, very useful video. Excellent! If I have a Sun 2000GTIL with 8x300w south oriented, and a second 2000GTIL with 8x310w west oriented, does it make sense to connect them in parallel.?

Hello, thank you for your videos.😊 so,Can I have 2 inverters 1kva , and plug them to my grid plug? Also, about the limiters, 2 inverters I have 2 limiters, is ok to add 2 limiters on my face wire so i dont exporting power back into the Grid? It will works? Thank you so much..

Very good indeed ... Can we do it also for 2KW Solar Grid Tie Inverter and 2Kw Wind Generator Grid Tie Inverter. Thank you.

Very interesting vlog. I’m in the Uk on single phase 230Volts (Line to Neutral). Was wondering about using one CT clamp connected to two inverters. But not connecting linking the DC terminals together. What do you think? 🤔🤟

My SUN-2000W GTIL2 will not save settings after correct operations. Any ideas as to how to factory reset, or correct the problem. THANK YOU. Cliff

Deye 3 kw inver ile bu göstermis oldugunuz inverter birlik de bu sekilde yapsam olur mu

In this video, are the two parallel 2K inverters using the two CTs (in parallel with tuning resistor) used in the previous video with just the one, 2K inverter? Or, is this a different configuration for the CTs? (I understand you put the input cables from the CTs to each 2K inverter in parallel except for the anomaly with the one inverter).

Do you know if it has DC input overvoltage protection? For example I see the DC input range is 48-90 volt. What if you connect two strings of 3 parallel panels whose voltage is 100volts when not underl load and 70Volts under load. Do you think there will be a problem with the inverter when not under load?

Then what if there are 5 or 7 inverter need to be all paralel ?

What sizes of wires did you use for the solar panels and the electrical panel?

nice video, so you just connected the 2 input connectors in parallel ? so basically 1 sensor with 2 plugs ?

Can you attach 48V battery bank (100AH each) directly to the + and - terminals of the SUN-2000GTIL2-H ?? Please advise...Thank you. I connected 48V battery bank to the + and - correctly and blew the unit??? Any suggestion. My unit is the 2000W Grid Tie Inverter Power Limiter LCD Display DC50-90V Solar Input AC185-265V Output SUN-2000GTIL2-H

Where can a Beginner go to get a lot of answers to their questions ? Such as should I think about 12 volt or 48 volt batteries ? How many panels should I get ? What kind of Inverter ?

how many amps does it support? in your opinion can it accept a curren of 20 ampere? (2 panel2 45volt, 10 ampere in parallel)

The 2 KW inverter at the back it has 2 entries.One is for the sensor Internal USE .and the other for another sensor external use.What is the purpose of external use sensor.Where do we use it and how please????

I have a question sir can you help me pls if would like to extend the limiter sensor cable what would be the sizes wire and how long can a be the maximo

Dear Friend. I have bought 3 items 2KW inverter with limiter. In A house that there is 3 phase Grid RST 380 VOLT. 230 volt per phase. Question No1.Can i connect each inverter seperatelly in each phase of the grid with each own sensor each one???? Question No 2. If i switch off from my electric panel the 2 phases and i leave ONLY one. Can i connect the three inverters in series so i can have in total 6 KW output to the GRID. ???? Thank you for your kind responce.PV

Have you tried running this with loads of 220v?

I wonder shy one is putting out most of the power

Dear friend I forgot to ask you.Since i have an array of similar solars with out put Volt [max] =68,4 and I[max]=30 Amperes is it better to instal 5 pieces of 12 volt batteries and make a system for 60 VOLT instead of 45 volts for a 2 KW on grid inverter with limiter ??? and of course buy a solar charge controller of 60 volts 50 Amp. ???? Thank you

Dear Friend. As you already know I have 3 x 2KW 220Volt AC on grid tie inverters.I want to connect all these three inverters to my electric panel which has 1 x 40 Ampere Fuse coming from Grid. QUESTION A .As far as the incoming PANEL VOLTAGE to the inverter. I understand that i connect the 3 red on top the +ve from panels in parallel.And also the 3 black on top the -ve from panels in Parallel too.As i know the limiter ring goes to the Live 1 that i only have as i said One phase.Do i have to place each limiter ring in the same live 1 cable??? I beleive yes. QUESTION 2.Now as as as the out put of the 3 inverters is concerned Do i connect them in parallel??? I mean each brown (live) cable together. each blue (-ve) cable together and each yellow (earth) cable together ???? QUESTION 3 .NOW what about the limiter CABLES ......How do i connect the three ones. ???? I must mention here that in a previous video of yours you confused me in a system that you were Using batteries.....48 volt you connected 2 inverters in parallel and you connected 3 sensors if i dont mistaken highlighting that one sensor ring you connected to the panel voltage.......Why? i am really confused. QUESTION 4.What happens if i install 48 volt battery system in the future. Each inverter has a pair of a solar panel array giving hapilly 68,4 volts.Since the top connections of each inverter will go to the battery output because the source of energy now we define to be the battery.........where do i connect the 3 double cables coming from the panel arrays offering each 68,4 volts.???? I imagine each to a solar controller ??? and where can i find a controller for 48 volts or 60 volts , in case i add one more battery.....I have search everywhere No charge controller for 60 volt system.....Thank you solar Engineering. VERY MUCH for your kind attention to my issues.....

Dear Friend .I want to add a 4 x 12 batteries through an extra solar charge controller for 48 VOLTS batteries system..Could you please tell me what type of controller for 48 volts I can buy from the market ?? I will have for each 2KW inverter solar power [1 pair of panels v=68,4 I = 9,94]. and i will connect 3 pairs in parallel giving me Total 68,4 VOLTS and 29,82 Ampere. Thank you very much.I appreciate your very kind response...

Hello sir If I don’t used a control charger the inverters still be connecting the same way in parallel

please very much where can i get limiter 60 ma i am waiting for reply thank you very much

Ну привет?'валодя'я имею к тебе пару вапросов по поводу этих ивнрторов'на какую мощность они рас итаны имею ввиду pv платэ ск шт у тебя на крыше и мощность

DEAR FRIEND .This on grid inverter with limiter has got only 2 terminals that you may connect the + and - of the solar energy.But in the same terminals you may connect the battery.Yes? It seems that it can not operate the system with solars and battery connected simply because if you use the solars to give to the grid then these have some protection voltage which id different from the protections of nbattery discharge.So this focus our thinking to have the possible connections of this inverter. A. connect straight awaw the panels to the inverter and have no battery. B.Use solar energy to charge up battery and then connect straight away the battery to the inverter.Your solar will charge your battery and the battery always will give voltage to the MPPT of the inverter.Please answer me if you agree.Thank u very much.

Hello sir me again Quick question the ac output of the inverters how you have connected and what is the output ac voltage per line

Is it possible to parallel two inverters one 2kw and the other 1kw? Thanks

I’m thinking each inverter should be connected to its own breaker

Not 100% certain, however, before cutting the CT-clamp-wire and switching wires, same end result would be shown on your SUN Inverter, if you had removed the CT-clamp, turned it 180 degrees and then mounting it again over the same leg.

you can reverse limiter sensor flow or direction instead of rewiring polarity... jizz, painful to watch

somebody is stealing your videos and post them on amazon under these grid tie inverters and speeds them up so the voice cant be recognized .. they make money on affiliate links at your detriment