Тёмный

DIY How to Rebuild a Ford 8" Rear End Quick Performance 3.55 Traction Lock Project Mut Part 5 

MustangConnection1
Подписаться 38 тыс.
Просмотров 66 тыс.
50% 1

Part 5 of project Mut - Rear End Upgrade is the first to go back onto the build. This one is long as it is step by step and done with the help of Mark a seasoned long time Ford rear end and transmission specialist. www.quickperformance.com/
The 1967 Desert Find Mustang gets a rear end upgrade with a 3.55 ring and pinion and traction lock unit from Quick Performance. This is a step by step tear down and build up of a Ford 8" rear end. Gone are the 2.79 freeway peg leg set up replaced by a completely kit from Quick Performance.
undercoating finish. The floor pans, trunk drops, frame rails, etc look fantastic and the patina underneath is preserved.
Project MUT is getting the rest of it's once over. This is the brief intro to one sad pony that shall see the streets again.
Follow along the journey, here we go!
What have we gotten ourselves into at Mustang Connection! This 1967 Ford Mustang has been sitting in the California desert for decades and is currently a sight for sore eyes. We plan on stuffing this thing with some great new products mixed in with some good 'ol swap meet and Craigslist finds to bring this "Mut" back to life. Why project Mut you ask ? well the only 3 letters left on the passenger fender still read MU..T... so as you can see currently a MUT not quite a Mustang just yet.
We already have some great partners on board for one of our most ambitious builds in Mustang Connection history.
Including :
www.borgeson.com/xcart/home.php
calponycars.com/
www.quickperformance.com/
opentrackerracing.com/
www.knfilters.com/
/ mustangc. .

Авто/Мото

Опубликовано:

 

11 июн 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 74   
@jerrymoore6227
@jerrymoore6227 2 года назад
Great stuff. Thanks for letting us watch
@pd2865
@pd2865 4 месяца назад
great video. I have never built a transmission of differential. But it is mince to see how a professional builds one.
@dougcoleburn1579
@dougcoleburn1579 4 года назад
Nice to watch this. Your friend is great and knows his stuff👍👍
@MustangConnection1
@MustangConnection1 4 года назад
He does and he has been doing most of our transmissions lately too.
@gasratzcustoms
@gasratzcustoms 4 года назад
Great video. we just put posi in our 8 inch on our 62 Mercury Meteor with 3.80 gears.
@StevieV64
@StevieV64 2 года назад
Thank you for(d) this clear and helpfull video. I’ll be doing my 8” ‘66 mustang diff soon so i am glad to have seen this. Not only how to do it but also tips on what to watch and be careful with. Great!
@MustangConnection1
@MustangConnection1 2 года назад
Great, I hope it helps, best of luck on your 66 project
@bigmike2149
@bigmike2149 2 года назад
Wow great job! 👍🏻
@TheRaulr151
@TheRaulr151 4 года назад
What a great video. I have a '67 Mustang I'll be working on and think I'll rebuild the 8" it has on there with this. Thanks for posting!
@MustangConnection1
@MustangConnection1 4 года назад
Thanks and glad it helped! Good luck with your '67
@michaelmeeter2589
@michaelmeeter2589 3 года назад
@@MustangConnection1 i have the same rear end setup.. what was your break in procedure?
@1armedguy4
@1armedguy4 5 лет назад
Thanks for the informative video, the only experience with the rear end is installing a half shaft, but I really enjoyed this video. Cheers !
@MustangConnection1
@MustangConnection1 5 лет назад
Cool and thank you, I realize it's long but wanted to go in depth for anyone looking to redo their pumpkin.
@richmylnek3476
@richmylnek3476 2 месяца назад
Real good video
@69mustang
@69mustang 2 года назад
Love the video. You guys are great teachers?
@freddiemac2847
@freddiemac2847 5 лет назад
That looks like a great set up if you are on a budget and aren't planning on big HP, if memory serves the 8 and 9 inch rear ends use the same axles.
@MustangConnection1
@MustangConnection1 5 лет назад
Agreed, this one is pretty stout for this particular car.
@jasonporrazzo3573
@jasonporrazzo3573 Год назад
I’ve watched this video probably 15 times end to end. I really want to try it myself, but nervous bc I don’t have a bench Vice.
@dennisnelsen-oq2tu
@dennisnelsen-oq2tu Год назад
Very informative video. Thanks for taking the time to do it. One question. I just rebuilt an 8in this weekend for my first attempt. In the kit with all the new bearings it had a new crush sleeve. But upon disassembly it didn't have one. So i didn't use it Now i cant sleep because I think i messed it up. What do you think? Thanks
@davidfarrelly6308
@davidfarrelly6308 4 года назад
Great video thanks for posting. How is the axle holding up nearly a year on? I would love to keep my 8" but I keep reading different power ratings online. Curries told me 300bhp max but not sure if this is their way to push the 9" axles they are selling. What power are you currently running through yours
@MustangConnection1
@MustangConnection1 4 года назад
Thanks David, the car isn't going serious racing but the 8 inch is fine if you don't plan on putting serious HP to the rear wheels. I think this set up is good for 400 to 450 HP. Hope all is well with you.
@mando82jr
@mando82jr 2 года назад
Any update on this? What type of transmission did your car have? I'm swapping my C4 for an AOD, so trying to decide between 3.55 or 3.80. Mainly for street driving. High revs on highway was reason why I upgraded to AOD. Thoughts?
@chamooza
@chamooza 2 года назад
Nice video! What is the part number for that nice aluminum pinion carrier? I can't seem to find it on the Quick Performance web page.
@danwatzek
@danwatzek Год назад
Great instructional video, but you never showed or explained how to check and set pinion depth. Can you do a segment on this procedure?
@hankfink
@hankfink 3 года назад
Do these not have an oil slinger being the seal?
@lucavanoli3497
@lucavanoli3497 4 года назад
what if i ve forgot to mark before disassembling?
@pd2865
@pd2865 4 месяца назад
for a small block Mustang 1965, I have never broken a 8" differential. And I have only owned standard transmissions.
@hotrodray6802
@hotrodray6802 4 дня назад
260 or 347 ??
@hotrodray6802
@hotrodray6802 4 дня назад
Just put a complete rear end assembly 31 spline posi 8.8 in it for the same price as a rebuild.
@jtfix5430
@jtfix5430 2 года назад
Didn't see the adjustment of the threaded ends on the carrier bearings. How is that adjusted??
@jodylane2045
@jodylane2045 4 года назад
What exactly are you running for an engine in that car? What hp/tq? And have you gotten it out on the road yet? I have a 67 mustang with a 415hp/tq 347 , a c4 and an 8 inch rear. New motor, stock drivetrain. I may upgrade to aod but I'm not gonna put a manual trans in. Would love to stick with the 8 and do this exact set up due to the cost factor. This is a driver not a track car. Would love to know the results of this build and your opinion on the set up. I think these 8's are stronger than people think.
@MustangConnection1
@MustangConnection1 4 года назад
Jody, The car isn't on the street yet but for what my plans are this set up is perfect. I don't see any reason you couldn't build your 8" to handle your motor, as you noted they are way stronger then most people realize. If you aren't going to flog it at the drag strip and HP and torque are under 450sih this is fine.
@jodylane2045
@jodylane2045 4 года назад
Thanks for the reply. It's definitely under 450 and thats at the flexplate. I do like a good redlight burn out though.
@Holledel
@Holledel Год назад
Why does the kit have two crush spacers? Like the one that’s on pinion?
@josephbrand3808
@josephbrand3808 3 года назад
I am trying to find what rear end I can swap into a 1975 ford maverick that has a 5 bolt 8 inch rear end. I am hoping to find one that comes with disc brakes.
@superduty4556
@superduty4556 3 года назад
Keep looking around at comets, mavericks and monarchs/Versailles. They sometimes has 9"s you can swap directly in. Keep looking.
@rosco664
@rosco664 3 года назад
Did you also install some forged axles?
@MustangConnection1
@MustangConnection1 3 года назад
No, the car isn't going to see much or any hard launches or drag racing.
@wakjob961
@wakjob961 4 года назад
Is the drive shaft still gonna be centered? Third member looks offset.
@MustangConnection1
@MustangConnection1 4 года назад
Pretty much that is how they look....driveshaft went in just fine.
@nowitsabadtime
@nowitsabadtime 5 лет назад
All these years later man, I forget? Was the 9 incher stock on all V8 Mustangs '69-'73, or was it an option...
@MustangConnection1
@MustangConnection1 5 лет назад
The 9 " was standard on all K code Mustangs 65-67, 390-67, 390 and 428 in 68 and then Boss, Mach 1, all 351 V8's up got them as standard 69-73.
@classicstangbrn8964
@classicstangbrn8964 3 года назад
Any motor bigger than 302 will typically have a 9in.
@mdavis4930
@mdavis4930 3 года назад
A year later, hows that diff holding up?
@MustangConnection1
@MustangConnection1 3 года назад
Hasn't hit the road yet, will advise once it does.
@troopx2183
@troopx2183 8 месяцев назад
Great video except for one thing. What the heck is that piece you have in the small bearing. The area you cut off because it was to close, has a small bearing right next to it, but what the heck is that in the bearing now?? I have the bearing in there with the lock, but I dont have what ever that piece is in the small bearing you have. You got me worried now, help!!!!!
@doughines5211
@doughines5211 3 года назад
Maybe I am not seeing this right? Are you installing the crush sleeve and then taking it back apart and re-using the same crush sleeve when you install the pinion seal? I don't think you are supposed to re-use a crush sleeve. Why did you not just install the pinion seal the first install of the crush washer. I have no doubt you guys know what you are doing. I just don't understand it. Thanks for the video and please don't take my questions as a knock.
@hankfink
@hankfink 3 года назад
To get an accurate bearing preload reading
@troopx2183
@troopx2183 8 месяцев назад
He didnt reuse it. There was a new one in the kit. They put it on, and when they tightened it, is was crusked, hence the name crush sleeve.
@BenDover10314
@BenDover10314 4 года назад
How much did you get this set up for
@MustangConnection1
@MustangConnection1 4 года назад
Chris, If you go to their website all of the prices are on there. It was very reasonable.
@BenDover10314
@BenDover10314 4 года назад
@@MustangConnection1 typing the price would have saved us both some time. Thanks
@maxierex6036
@maxierex6036 2 года назад
What is total cost
@fliguy41
@fliguy41 4 года назад
How much for everything?
@MustangConnection1
@MustangConnection1 4 года назад
Give them a call as most of these kits are built to your spec so pricing varies a bit. This set up was about $600 for the gears and trac loc set up.
@fliguy41
@fliguy41 4 года назад
@@MustangConnection1 rite on thanks man
@Mike583
@Mike583 5 лет назад
I never understood why anyone would run the 8" rear! I'm just going by personal experience with completely stock ones. They didn't last very long under hard use,whereas the 9" were way more dependable, even completely stock!
@MustangConnection1
@MustangConnection1 5 лет назад
Robert, As I stated in the video( I know it's a long one but hoping to help others) this is the first 8" I have ever built up like this one. The idea was to keep more of a budget build aspect while strengthening whats there. It won't be a high horsepower build at this point and that set up is more than strong enough to handle what the car will be doing at this point. Additionally literally millions of these units were put under 289 Fords so they are plentiful and not everyone can afford to sling a 9" out back.
@Mike583
@Mike583 5 лет назад
@@MustangConnection1 When I was racing,it was the 70's. Parts were easy to get & cheap,compared to later years. I reminisce about my times,& can't comprehend todays prices! I bought 2 brand new Holley 600's for about $50 each! Also bought 8 289 hipo connecting rods for $8 each,brand new at Ford dealership! Good times!
@MustangConnection1
@MustangConnection1 5 лет назад
@@Mike583 I know it's hard to believe how time flies!
@ftswallday4357
@ftswallday4357 4 года назад
9 inch rear r better
@oisociety
@oisociety 4 года назад
depends on your set up bro. for something hi performance i can see why youd need a 9
@ftswallday4357
@ftswallday4357 4 года назад
Beautiful nice rear end setup but the traction control
@MustangConnection1
@MustangConnection1 4 года назад
But the traction control ? Not following.
@ftswallday4357
@ftswallday4357 4 года назад
Traction control in a old truck useless
@MustangConnection1
@MustangConnection1 4 года назад
@@ftswallday4357 What old truck, sorry not following again....this is going in a Mustang
@leevongilmore2070
@leevongilmore2070 4 года назад
Hey 3.55 gear how is it on the freeway?
@MustangConnection1
@MustangConnection1 4 года назад
3.55's are a happy medium if you are running a standard 3 speed automatic as in this car. A nice step up from freeway gears without ruing the daily driver feel. If you are putting it behind a 4 speed or 5 speed there is room for a more aggressive ratio.
@leevongilmore2070
@leevongilmore2070 4 года назад
@@MustangConnection1 I appreciate your response I was in a debate between 3.55 and 3.40
@troopx2183
@troopx2183 8 месяцев назад
You get any higher, and when you go on the highway you would be over revving just to go highway speed, and revving all your gas away
@tuckerc3802
@tuckerc3802 8 месяцев назад
You gotta stop talking over the old man and trying to finish what he's saying other than that great video thank you
@goldysgarage189
@goldysgarage189 6 месяцев назад
no way would I do this - pass it to a pro
Далее
Сумерки сасага🧛
11:41
Просмотров 1 млн
💜☀️✨
00:47
Просмотров 236 тыс.
D3 Ваз 2107 Не умри от зависти!
18:57
Ford 9 Inch Pinion Rebuild and Bearing Replacement
38:06
Learn How To Rebuild a Ford Toploader 4 Speed - Part 1
29:23
Ford 9 inch Build
13:25
Просмотров 2,1 тыс.
C4 FORD tear down action you got it!!!
20:27
Просмотров 174 тыс.
Ford 9 Axle Rebuild
1:07:22
Просмотров 9 тыс.
😱 Велосипед-лимузин?!
0:20
Просмотров 830 тыс.
Tiny motor, big power
0:25
Просмотров 2,9 млн