Downhill pipe welding, hot pass, and filler.

Подписаться 56 тыс.

Просмотров 13 тыс.

50% 1

Tips and tricks on downhill pipe welding with a 6010, 70+ or 8010, Pretty much works the same on all downhill rods.
This is my journey to welding pipe. Welder motivation. You can do it any of us can do it. You just have to sacrifice a little bit it to gain a lot. Welding pipe really saved my bacon. I hope this helps somebody have a great day!
#Pipewelding
#Pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools
My Financial Fitness Channel: / financialfitness
Buy your gold and silver here or email us at financialfitness318@gmail.com
shareasale.com/r.cfm?b=153166...
Disclaimer: I am not a welding instructor, personal trainer, nutritionist or financial advisor. I’m a welder with life experience that aims to bring value to your life!

Хобби

Опубликовано:

21 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@luisrosario8709 2 года назад

I’m a pipe welder and I’m so glad for men like you that have helped me out in my career. But yes 6010 and 7018 are different ways to run them but what I can tell you is to pay attention to your angle, speed and the toes of your weld. And listen to these old timers they’re very knowledgeable.

@TaylorWelding 2 года назад

Thanks Luis ! I appreciate you saying that. There’s gonna be plenty a young guys to just help.

@millsdevan 2 года назад

I appreciate all of the advice I can get. I'll never be the best but I dang sure won't stop trying to be!

@luisrosario8709 2 года назад

Took me about a year or so but finally passed my test the goal is don’t give up keep trying

@ThePipeWelder 2 года назад

Thanks for knowledge...brother

@macadelico7768 10 месяцев назад

Exactly what I needed help with, my hot pass at the bottom appreciates it!!

@mountains76 Год назад

You are great bro! Thanks!

@starship3095 2 года назад

Awesome videos and amazing talent.

@oldmate8626 22 дня назад

Yep "The fringe". Great video. Just in time. got some 6010 to play with. Not common here in Australia . Thanks

@TaylorWelding 17 дней назад

Right on mate!

@yomama9191 2 года назад

Im about to go back to school to take a pipe course while I'm working this structural job. I'm glad I have the little experience that I do because it makes visualizing what your saying much easier. #thefringe keep em coming man 🤙

@TaylorWelding 2 года назад

I bet it does. Practice at school practice at work practice at home and then practice some more

@patrickgermain3278 2 года назад

#The Fringe! Great content. Keep the good advise flowing!!

@TaylorWelding 2 года назад

Thank you! Will do!

@millsdevan 2 года назад

#thefringe thanks again Chris I'm gonna go put this info to work! Have a good weekend man!

@rosscramer9017 Год назад

#The Fringe I really appreciate your videos I've been welding for about 10 years now but there's still a lot there for me to learn I like what you're doing thanks

@TaylorWelding Год назад

Thanks for watching Ross

@mikemaracchini6785 2 года назад

I'm a retired pipewelder of 32 years. Ur right about these new so called pipewelders. They think they know everything about pipewelding. They don't know squat. Most won't listen to us old timers because they know it all. I didn't do downhill much in my career but I agree with ur technique for downhill. My pipewelding was mostly high pressure pipe with uphill technique. 6010 root, 7018 fill &cap. Keep up the good work my brother & maybe these wannabes will learn something. Peace!!

@TaylorWelding 2 года назад

I knew it all at one time! LOL it's just par for the course when you're young.

@mikemaracchini6785 2 года назад

@@TaylorWelding I guess we all did when we were young. Everyone is a pipewelder until the real pipewelder shows up. Take care brother & keep up the good work! Peace

@markdeere5495 Год назад

Man you are absolutely correct cause when we should up we had to learn whatever it took to take care of our babies and wives

@aristidedixon4917 2 года назад

#The Fringe.... awesome info 👌

@TaylorWelding 2 года назад

ThanksBrother #TheFringe

@RollingLiving Год назад

Every time you said, "weld small" I thought of Mel Gibson in The Patriot teaching his kid to "Aim small, miss small." Good advice...both of those. 🙂

@greggarcia6291 4 месяца назад

I’m practicing pipe right now. So all your knowledge I try to remember it and apply it. Had to throw a 👍 for the Batman 🦇hat

@mborrego66 2 года назад

Your a bad ass my brother. Keep up the good content man! There a reason why the good Lord has blessed you in a successful career (now may have not always been the easiest I recon) but is because of the man you are and you willingness to help. Just thought I’d throw that out. Look forward to more of your content! Definitely Gona give the ammo cans a try. Have always heard of it but always just keep them thrown in the helpers side I’m the back in the cab haha. Take care my brother! S. NM Rig Welder

@TaylorWelding 2 года назад

Thank you Matthew. That means a lot coming from another rig Welder. It was not the easiest for sure. Give that ammo can A try. It’s a 20 mm Thank you for watching and thank you for the kind words

@dparker323 2 года назад

Amn Amen brother

@pedromontemayor1620 Год назад

Enjoy watching your videos sir!! Got on a job where I had to down hill the root and up hill 7018. Let's just say I'm not much of a stick hand mainly tig!!😂 Found your videos and have got way better from when I started. Hell even thinking of selling my dinosaur sa250 with a Perkins 3 cylinder and getting a vantage now!! Thank you and I really appreciate your advice sir!!

@TaylorWelding Год назад

Cool Pedro thank you for the feedback. I sure like my vantage, both of them

@soringabriel4062 Год назад

#thefringe man you are doing us a great favor with your videos thank you so much!!!

@cj7593 2 года назад

I just busted a test today and I’m trying not to beat myself up over it but I’m gonna learn from it and weld even more

@TaylorWelding 2 года назад

Good job! There are no failures they’re only learning experiences. You’ll get it just keep doing it

@trevorwright3769 Год назад

I am a pipe fitter/combo welder going on 10 years. I have always loved teaching the younger generation what took me years to figure out. I appreciate you taking your time to teach those that have a drive to learn. I have always wanted to learn all there is to know for my trade. I have welded a wide variety of metals and processes. The one thing I have not been able to master is the bottom of a pipe running downhill rod. I have pictures to show what I’m talking about but it basically always wants to leave a hole on the bottom tie in. I don’t struggle with the top and sides so I started welding the bottom half then flipping it over. That way I can weld two bottom halves but 50% of the time I get a hole on the tie in. What is your suggestion? I’ve heard people say to flick the rod, flick it away, long arc towards you, long arc out taking bigger and bigger steps getting further and further away. The last one seems to work the best for me but still get a crater from time to time.

@TaylorWelding Год назад

Go past the bottom. Weld up the other side a lil bit and turn it down

@TaylorWelding Год назад

I will try and make a video the next time I get on some pipe.

@samrios465 8 месяцев назад

The fringe 🤙

@TheLealDeal-bp7to 2 года назад

Thank you sir for what you, just subscribed and also just got a job working at a shipyard doing structural but man o man how so much I need to learn pipe. Got me some pipe scraps and gonna practice at home when I have extra time using your techniques #thefringe

@TaylorWelding 2 года назад

I have been there and done that. Shipyards is the pits. Hang in there and practice on some pipe. This too shall pass

@TheLealDeal-bp7to 2 года назад

Amen

@donaldturner6927 Год назад

//made it. Thanks, Donnie

@VantageWelding 2 года назад

Cmawn 🔥

@TaylorWelding 2 года назад

Thanks bud You’re great

@anicekevorking3753 4 месяца назад

#thefringe I really would like one of those stubby rod savers one day. Seems like it would take the wobble out of cheap stingers

@neilshahndynasty.8882 2 года назад

plug welding and stich welding is easy for me , most welders hate both welds lol

@anicekevorking3753 4 месяца назад

#thefringe. I haven't tried pipe except to walk the cup on tig. I'm trying to specialize in tig welding but stick welding is pretty dope too.

@juliusspartacus5437 11 месяцев назад

I am on...#thefringe. Great video! I'm on pipe in welding school now and your videos are helping me a lot👍

@TaylorWelding 11 месяцев назад

Great to hear!

@TaylorWelding 11 месяцев назад

Let me know if you have any questions

@juliusspartacus5437 11 месяцев назад

@@TaylorWelding Thank you, if I'm having an issue I certainly will!👍

@cliffordpace6921 2 года назад

# The fringe boss man!

@TaylorWelding 2 года назад

Thanks brother #thefringe

@wedwobster6510 2 года назад

#thefringe love your videos bud I’m starting out, little late in the game but oh well was down a different path before now but anyway your videos are super helpful and educational and I can already see myself improving just in my practice. School starts next month for me and I’m stoked on this path. Love the videos keep up the awesome content! Also ready for the part two of your rig tour 👌🏻

@TaylorWelding 2 года назад

That’s cool web. Let me know if you have any questions I’ll make you a video

@juniorp6467 Год назад

A video I haven’t really seen is cutting and prepping the straps from a bell hole and branch test . I’ve heard of people getting looked out from taking out too much metal when grinding down the bead or cap , also making the strap to small. Might be a good idea for a video

@TaylorWelding Год назад

If I ever do another test I will make a video

@jefclayton8341 2 года назад

I've been a rig welder specialising in pipe for the last 25yrs, and I completely agree with what you said the gen x'ers are mostly pathetic. I had a helper who spent more time on his phone than working. Needless to say he got run off. If a person wants to learn I will spill my knowledge to them and help them out. If they think they know it all then My lips remain sealed. 6010 can be the easiest rod to run with a little practice or the hardest. When I was taught ,the guy that taught me told me to use both hands and become good at that. Mainly because two righty's on an uphill stretch is ok for one but not the other. One guy will blackout after a few passes. In was also told watch everyone you can and take something from each and try and make it part of your technique. Same with processes don't rely on just one to pay the bills. up here in Alberta we have to use multiple processes to keep the qc guys happy after they go to a trade show where the salesman says with this process each welder can weld 400 inches a day.

@TaylorWelding 2 года назад

400 inches a day! Damn. I’ve never been to Canada but I want to go. I’ve got a trip planned to Saskatchewan but I’m not gonna take the vaccine so I’m probably not gonna go there either. That’s what I did I watched everybody I could. And I had some really good men teach me. I think generation Z will wake up. I hope so. Gonna be hard to make a living Peking on the phone

@millsdevan 2 года назад

I'm part lf the millennial generation and the fact that most of us are sorry and have the mentality that the world owes them something makes me strive everyday to be more like my grandfather and great grandfather's generation. You get what you earn and nothing else. I thank everyone of yall taking the time to explain all of this and trying to make us better not only at our trades, but better people also. Stay safe!

@neilshahndynasty.8882 2 года назад

I do A circle , in and out depending on what the weld is doing

@levi5548 2 года назад

Very good explanation, I'd like to hear your technique on tie ins.

@TaylorWelding 2 года назад

What kind of tie ins? tack to bead. or pipeline tie ins

@levi5548 2 года назад

@@TaylorWelding like tying together when you throw a new rod on so you can't tell where your starts and stops are when your good at it

@dennisstewart1455 2 года назад

Hey chris really appreciate your videos just started a 6g class ...completed 2g /3g unlimited plate 6010 root 7018 fill n cap....cut n bent both pieces passed bend test now on 4g really struggling with the root having a hell of a time seeing the keyhole....any advice or could u do a video of this....thanks alot man big fan keep up the good work...alot of us new welders really need guys like u

@TaylorWelding 2 года назад

Let me think 🤔

@donserujio951 Месяц назад

what rod angle do you have on the bottom? ive seen videos saying forward some pointed back to you and to the middle of the pipe. I really struggle to get some good beads on the bottom

@davidbambam4032 2 года назад

# The fringe

@scottyseanychannel-costell8772 2 года назад

#thefringe Great video... thanks

@TaylorWelding 2 года назад

Thanks for watching!

@stephenleonard6995 Год назад

#thefringe, Not sure if you have already done a video about this or not but I am getting ready to finish welding school and really like downhill pipe welding. I live in Florida and haven't been able to find any folks who have worked on an oil and gas pipeline. How does one go about breaking into the industry? Do i have to start off as a helper or can I come in as a welder? I know with our current environment that these type of jobs maybe harder to find but I am just looking to be pointed in the right direction. I appreciate your time and thank you in advance. PS, love your channel!

@TaylorWelding Год назад

That’s a really good question I’ll make you a video

@wrench-weld-build6545 Год назад

Everyone wants to be a pipeline welder cause they hear about big bucks...which is true for the really good hands...and mad respect for pipeliners...but the trades are in high demand for other industries. Learn how to weld, how to be a mechanic. Learn electrical. Dont be scared to learn the technical stuff. Do that and you will see how much demand there is in manufacturing. Make 80% of what a pipeliner makes for half the time put in. Machining as well. These big manufacturing outfits need Jack of all trades to keep the robots running. #thefringe

@TaylorWelding Год назад

I agree… you need to know all of it

@darcypatterson1600 9 месяцев назад

How can I get one of them stingers you use sir

@justinhuffman1507 Год назад

#thefringe what causes trapped slag inside the ripples of your bead? I brush it with a wire wheel and I still see small reflections of porosity/slag in my ripples. Very small but evident nonetheless

@TaylorWelding Год назад

Yea it just does that sometimes … buff it’s sideways.

@GalatinAcres 2 года назад

#thefringe sup uncle Chris😏 it’s so upsetting sometimes in the machine shop I’ll see guys that are very talented at what they do but they just don’t want to be bother to teach these kids or anyone it’s like they get afraid that someone’s going to take their job. I hate seeing that I will teach anyone that is willing to listen and learn. And that goes for everything in my life farming, electrical, remodeling I don’t care! We all know a little bit. If someone wants to ask me something I’m all in to help them figure it out! Have a great day brother!

@TaylorWelding 2 года назад

I know you would help anybody that needed it. Thanks for watching and commenting #TheFringe

@dustinatwood7077 2 года назад

#the fringe

@TaylorWelding 2 года назад

Thanks for watching all the way through

@zeke1eod 2 года назад

#thefringe Great knowledge be passed on. Stand against tyranny, never be a loyal subject! No jab for me. Stay safe and God bless

@TaylorWelding 2 года назад

Thanks bro. #the fringe.

@wantutri7225 2 года назад

hey chris ive been getting some pipe coupons from the scrapyard that aren’t the most square cut and theyre also a little egged so it it makes for a little hi lo. its good real world practice but ive been struggling with the bead since i dont have a remote on my sa200 yet. Could you do a video on beading tight & open sides on pipe by just thinning the land and coming back over to fix IP? #TheFringe

@TaylorWelding 2 года назад

I sure will. That’s a great idea

@TaylorWelding 2 года назад

Welding pipe with imperfections something I do every day. It’s good practice for you

@gusesparza2070 Год назад

What kind of stinger is that on your demo video

@TaylorWelding 11 месяцев назад

Stubby rodsaver

@tylermcdaniel4895 2 года назад

Would you say 798 is going to have opportunities for folks with pipe welding experience? Journeyman pipefitter/welder. But I remember sometime around 2016, there were an infinite amount of people trying to join 798 without luck. So it steered me away.

@TaylorWelding 2 года назад

I’ve never been union. Don’t ever plan to be

@TaylorWelding 2 года назад

So I have no idea

@tylermcdaniel4895 2 года назад

@@TaylorWelding I’m a non-union guy as well. Just figured I’d pick your brain. Love the content. You’re another great work dad to add to my arsenal.

@tylermcdaniel4895 2 года назад

@@TaylorWelding I’m starting a millwright gig. Really looking forward to expanding skills and knowledge. The goal for me is to be able to do anything under the sun very well. Have a good day man thanks for the replies. Glad to be an early subscriber. I can see this growing big

@dontfix-it786 Год назад

You should have more views than you do . Maybe some people don’t understand real life welding . People don’t understand that with out welders they wouldn’t have half the shit they have today.

@TaylorWelding Год назад

Thank you

@neilshahndynasty.8882 2 года назад

Buy Silver and Platinum . :P lol

@dparker323 2 года назад

The frenge

@TaylorWelding 2 года назад

Yeah!!! #thefringe thanks brother

@deant876 2 года назад

#thefringe. I see you are always welding down hill. But I hear other channels say the up hill is a stronger weld. What are your thoughts on that. I down hill when I can (I need to practice my up hill)

@TaylorWelding 2 года назад

I guess they say that because you can use a 7018 if you go up hill. It doesn’t really matter it’s all a bunch of BS. I’ve never seen a pipe weld break my whole career

@andrewbradstreet4218 Год назад

Hash tag the fringe

@luisrosario8709 Год назад

Iv went to my 12” butt weld test and branch test and I busted do to lack of fusion on the cap I thought I had it I passed the branch test but I’m struggling with the butt weld what can I do to avoid this

@TaylorWelding Год назад

Lack of fusion? Sounds like your too cold. I'd never had that problem with clean metal

@luisrosario8709 Год назад

I ran 6010 5/32 fill and cap at 120 amps maybe I’m cold but I’m new in the API industry it’s a learning curve compared to ASME stuff like 7018.

@timgleason2910 8 месяцев назад

The fringe

@pipegang6497 2 года назад

A taller weld will hide more on an x-ray

@TaylorWelding 2 года назад

True! Well said

@samuelscragg7052 2 года назад

#fringe

@TaylorWelding 2 года назад

Thanks Samuel

@jessevaldez3825 Год назад

#THE FRINGE

@randomschittz9461 2 года назад

#thefringe my weld ninj.

@TaylorWelding 2 года назад

Lol thanks for watching the whole thing

@HauntedBranch 9 месяцев назад

#THEFRINGE . I need to replace a section of pipe 4in od 1/4 thick wall . how would you weld it. I have some 6011 rods 3/16 and 1/8 and 7018 1/8 . If 6010 will work better I can order them.

@darrellkirksey17 8 месяцев назад

I don't mean this to sound fully like it will but i kinda do.. no offense but i wondered how their under basket weaving was going to work on joining steel..!? Seriously though i respect what you do 100% millennials not so much.