Easy Head Tracker Setup on Spektrum Radios 

Hi, surely an innovation and lots of help to those, like me don't know much about electronics. Thanks again, you're awesome.

I got it working on a 6 channel receiver I put the system in my aero scout I can’t wait to use it

Will be very helpful when I get one! Thanks!!!

Hello Motionsic RC team, I just bought all your products, it would be great to have a video of the complete construction of the fpv solution, especially from the point of view of electronics and connections :) See you soon in the sky

Nice Rob! I want one. Great stuff guys! 👍👍

Your head tracker is now working on my crossfire setup.

Oh, so helpful video, thanks!

Thank you so much

Thank you so much! Very helpful!

thank you highly recommend the motionsic pan and tilt systems,they are seamless!

I'd like to see a detailed video of your goggles, camera, and plane set up. This looks awesome and it appears you have the details dialed. I noticed you cut the cockpits front in back for better vision and air flow.

really need a complete install and setup of head tracker and camera and air unit installation and power input .

Tengo un control nx10 ya me llego pero no podido acceder ala página para configurar agan mas videos explicando traducidos porfavor

I had constant connection issues using this with a Spektrum iX 14. The only resolution was to use an older DX series radio.

Hi guys. Have you a link to the camera and air unit I need to go with this setup. I’m new to fpv and want to set up an rc plane for fpv.

Awesome videos that now have me wanting to get into FPV. I have purchased DJI v2 googles and your head tracker as well as the BAG. I am confused to whether you are connecting straight to a flight receiver or using a flight receiver connected to a flight controller. I would like to see a video of complete setup of what you are hooking everything up to. Thank you for the great videos!!!

Anyone know how to set this up on a Spektrum Dx8e? I don’t have a trainer port , only wireless trainer.

Great product works great with my RadioMaster. Was able to get it work very easy on TX16S. But i have tried for hours on NX8 and always get "No Student Signal". I am using the Spektrum port cable to 1/8. I have tried with and without a mono adapter and always the same. "No Student Signal".

Is there any issue with mounting the camera/gimble under an rc plane. Would the gimble act differently if it was flipped over and mounted that way?

I just got my head tracker from Motionsic RC, plugged it in to my Spektrum DX18 (Gen 2), which I had set up for trainer mode. Turned everything on and it worked using a couple of spare servos I had. It was late in the day, so I turned everything off and today all I get is "No slave detected" on the Tx when I flick on the trainer switch. Is there a specific order that things need to be plugged in for my Spektrum Tx to work properly?

take note: when you are using FPV trainer you must turn on the main Tx by the power switch then plug trainer cord to main Tx.!!

Great Head Tracker option!! Can it be used with Radiolink RC6GS V3? Does it come with the required cable to connect to the DSC port? I already have the Motionsic Pan & Tilt rig, it works perfectly... Thanks!

Can you please give me a tutorial to set up the camera if I buy everything needed in the blue truck video?

I want to do this to eflight F-14 tomcat or the same eflight viper 90 what should I get to set this up

Hi, I have a Frsky Taranis X9D plus , what do you recommend I buy for 8ch receiver to work w your head tracking? I purchased it. I also have a Spektrum DX8e. Which is easier to set up? What else would I need for wireless w Taranis?

One other thing please, does this system work with Spektrum DX9 Black? Or else can you suggest what is the best option? Thanks

Hi, Robert. Is there a way to check the output on the mono cable end? I can see all three axes working in the GUI, but my Dx8 transmitter doesn’t recognize the signal (although it did the last time I used it). I’ve ruled out a bad connection, and tried two different 1/8" cables to no avail.

Hello, do you have tutorial how to setup on jrpropo radio?

how do you get the 7 and 8 channel out of the receiver to drive the gimbal? if you put the multiprotocol module on a frsky X20 will it control a DSMX receiver?

The case for the head tracker it self, is that printed or where can it be bought?

Does the head tracker only work when its orientated on the side like on dji goggles? is it there for another reason or is it just there because thats where the screws are? would i be able to calibrate it in a different orientation/mounting position? (since i am using non-DJI goggles and wont be able to mount it on the right side of the goggles)

Just order two badass gimbal and the headtracker!! Can you do a video for radio master tx16s with crossfire?

Omg dude I've been looking for these everywhere, so I have a plane but I want to get a jet like other previous videos I've found of you and its awesome but I want to ask a couple of questions about your product. For the gimbal the price is set at 90 dlls does that comes with everything un that pic of the box shown there? Or is it just the gimbal? Also are these the only steps I should worry once I get all of the components to start my fpv since I'm new to the whole fpv? (I'm afraid I might channel something wrong and maybe Uninstaller the software or not being able to connect as im a noob still). Is the spektrum nx12 the only spektrum transmitter that you know of that works with this set up or all of them are the same way? Love your contect btw, keep doing videos like these I would much appreciate that!!! Can't wait to get my own fpv set up and manage my craft as im in there🔥🔥🔥🔥💯

Where do you get this controller? Sorry I don’t have sound at the moment if you say it in the video.

Great vid, thanks :) I'm a novice, please humour me :) Does that transmitter differ from a dji fpv transmitter, and how does the control range compare? Many thanks :)

Hello, do I always need the remote controller to set up head tracking?

I have a DX6e… only wireless trainer… is it possible? There is no jack plug for wired trainer… only wireless … also have a jumper t16 or a tbs tango 2 🙈

Where do you connect the wires coming from the air unit? Do you only use the two wires to power up the air unit or do you use all the wires?

Hey motionstic so I sent an email bc I wanna get in touch with you about fpv bc fpv is my whole thing but I don’t have fpv or any thing and I wanna get into it with the dji. What do I need to make a full set of equipment and what goggles to I need and everything you put on your air craft bc your the only person I can find that has the equipment for fpv. I’m so confused on fpv

What voltage is that battery for the headtracker? Looks like 5 v.

too bad to have wire between goggle and remote... need to use goggle transmiter to pilot the servo of camera... not remote

Any plans to add Wireless for Spektrum since Spektrum supports wireless?

I have dx9...will it works? Thanks

how do I get to the interface with the head Tracker? will it work with a Mac?

Which transmitter are you Unsing for Ur setup?

Tilt in HT is going the opposite direction. what should i do?

How do u wire the receiver to vista

This will not work if you have a crossfire setup hooked up to your ix12 found out after a couple of weeks of fighting with the unit. Now I just got to paperweight

Will the head tracker work for NX6?

Does this work for the NX8?

How long is the rang ?

Does the head tracker have to be wired

What is the range of this head tracker?

Where's the Spektrum NX video?

I think you mean adapter not adopter

pain

I left spektrum!

I have a dx6e so I don't have a wired port only wireless trainer. how can I connect to a head tracker?