EASY Workshop Guide | Everything you need to Start | Create Mod 1.19.2 |  

Edit: so turns out my editing software has a "normalise audio" function and it just nuked my voice, making the game audio WAY louder, I'll make sure not to do that in future

"How to build a beginners workshop! Step one, go to the nether..." Ah, I see, we have different definitions of 'beginner'.

I love how you embrace the aesthetic-functional synthesis side of create, which imo is its biggest strength. I struggle with building so this is a great guide

As far as the saw thing, my guess is it’s because spinning towards you as you push away is how a table saw operates

You can use casings on the cogs to make the speeding setup more compact, since casing make so the shaft part of the cog doesn't interact with what in front of it.

Hi I've been checking your guides and they're mostrly grea! Specially the fact that you're not only building contraptions but also buildings to hold them! But I have one criticism if you ever update this, you skip a lot of steps that may seem simple to you but are not simple for those getting to know the mod, so I find myself pausing the video a ton of times to try and count your blocks so i can have the same set up or figure out what you put behind stuff and didn't show, figure how to make things work that you didn't explain..... Once again, still great guides, the best available really!

really great video, i enjoy how you don't explain the absolute basics like every other tutorial, and instead give us tips and tricks about optimizing layout of machines and mechanical power. I am looking for more of that type of content. keep up the great work, subbed

It's a tutorial if you know what you're doing otherwise it's an adventure in learning how to build

13:24 how do you build the crushing wheel I can't figure it out. Skeej_inc can you help me also I can't download the world

Bro why didnt you show us how to build the crushing wheel... All you did was skip through it

you can make the sort of speed step-up with cogs much more compact by putting casings on the cogs--it prevents them from linking with the other cogs that the shafts would usually connect with, so you can basically just go with a tiny 2x3x2 footprint or so by stacking them on top of each other

How did you install the crushing wheel ?

This and the steam engine video help a lot

most underrated channel on yt

9:44 I can recommend the framed blocks mod for this problem. The mod contains every single form of block including stairs and they take the texture of the block you place in it.

Excellent tutorial, please keep em coming!

Hey I know it's been 3 months but please pin this As of the current version of create out on 6/27/2023, you only need 1/2 of a waterwheel to power the entire 8-engine setup you see in the video. You do, however, need to double up on the pumps to the 'kick-start' engine that the waterwheel powers in order for it to receive enough water. So, if you want, you can do what I did and shove two entire 8-turbine setups in with one water wheel to power it all, turning 256SU into 32,768 SU.

You can also use the create item container with some brass funnels to make an easy multi stage deployer set up in 5 x 3 x 2. Also, using the attribute filter you can you make your filtering much easier..

8:25 They did that so that you can use three small cogs conecting last axis of the input belt, saw and first axis of the output belt. Each connection between cogs inverts rotation speed, so first cog pushes left (X), saw is inverted (-X), output gets inverted again (X). In real life, saws have to cut against the log, or the saw will throw the log forward... kind of makes sense.

I would love to have this whole build as a Schematic for my cannon! If anyone is willing to make a schematic for me....

Could you maybe show a clip of how you made the crusher wheels work with the rotational energy. Also, do you plan to make a video showing how to make a cobble generator ? Or I could download the world and try to implement a cobble generator as well

1:07 No way... I've always waited for them to spawn 😭😭

looks 10/10 useful 8/10 good for starting 10/10

I have an idea why not a creative or survival build series.

7:49 I don’t understand how you builded the saw:(

This is a great tutorial, but just one thing, the saw blade situation can be done with 3 cogs on the belts and saw

8:25 When using a table saw, if the saw teeth are coming at the wood from above, the wood is pulled down into the table. If you feed the wood in backwards so the teeth are coming up at the wood from below, the wood can be knocked into the air making a sloppy cut or worse case scenario the saw catches the wood and launches it at high velocity away from you. if you were holding the wood down hard enough to get it to cut when this happens, there is a good chance you get pulled into the saw.

my fan and belt are going the opposite way and i have 0 idea on how to reverse it? maybe showing it in the vid even tho it worked for u would’ve been great.

This really helped, brilliant video, thank you!

11:30 huge tip thanks

So, the lesson of the video is that if you ignore common building advice and go with an even base instead of an odd base, you can get twice as much crushing power? More seriously, this is really cool, although I am curious why you built the one building to show off and then designed a somewhat different one on the video. I get you wanted to show your thought process but it still felt weird.

9:33 to 9:49 It felt like you funded a tiny mistake in a test, and it destroyed everything after it, and you have to rewrite it completely 😰😱😭😭

Does the bulk smelting work with anything else besides lava? I tried using a soul campfire but it doesn't want to go through either the camp fire or the belt.

i mean it does make sense, the sawthooths are opisit of the rotation to cut anything XD otherwise lovely video! ❤

Bro, could you make it schematic? It won't let me open the world.

Someone know why in my world i cant do brass ingots unless i use fluids in the mixer?

7:29 - mentally screaming at you over how the obvious solution was just thee cogs

you can encase the cogs to gearshift compactly if you don’t have a rotation speed controller

i know this is outdated but, my system gets over stressed so much, can someone help me out please. i really need this. i cant power the last two grinders, i can only power it with 10 rpm but no more than that. i really need help.

Why not place the fans horizontal so you only need 1, instead of 5?

idontknowhowtheanalogywork sounds like a real word

I can’t get the schematic to work 😢 Great design though!

I love having a seizure every time I look at the shafts

how do the crushing wheels work

Don't know if anyone has mentioned this so far, but the issue with the saw mill is that it is an optical illusion. Drive down the highway and watch the wheels of the cars moving fast. Their hubcaps spin so fast they appear to move backward. So, your saw appears to be going one way, when in fact it is just moving so fast in the opposite direction that it only looks like it is moving the same way as your belts.

Fans don’t seem to be able to push through belts as of the latest mod version. I placed a lava bucket on the right of the smeltery belt with a fan behind it instead. It functions fine but having just a cube of lava in the wall isn’t ideal in terms of aesthetics.

The Download dosnt work for me

Is this mod going to be 1.19.4 for forge

Can we get a Schematic for this please?

Saw blades are like that in real life.

I cant find the last video?

Hey so question when loading the world it gets stuck at 80%

only need one video to subscribe

Schematic pls

I love how you showed us how to build the crushing wheels

what did you use to pick up the items after the fans push them up for the crushing part

I like how you'd rather change the gamerules than not use wood to contain lava

⭐ Promo'SM

PLEASE MAKE IT 1.19.4 (Idk who made the mod, imma assume u for now tho lol)

hi @skeej_inc can i ask how i run the boilers thank you

schematic?