Evil Ted Talks 3 : Foam Sizing, Pattern & Fabrication Tips

Подписаться 193 тыс.

Просмотров 93 тыс.

50% 1

I'm the Evil Ted who makes props and costumes. I’ve worked on Star Trek Into Darkness, Walking Dead, Fifth Element and Guyver, among lots of others. I've made pretty much everything out of every material, but foam is my favorite.
I'm here to share my skills and shortcuts, and help you learn how to make foam costumes and props, too.
To see more, check out my site: eviltedsmith.com
Here are some links to make your shopping easier.
How to make a duct tape body form
bit.ly/1RDdIBl
How to make a Head Cast
bit.ly/1OjwQoJ
Head forms
bit.ly/1RRL0Pc
Male body dress form
amzn.to/1UJte4I
Female body form
amzn.to/1PLRo69
Cosplay Pros Foam
thecosplaypros.com/?ref=pdyq8g01
Floor mats
amzn.to/1ZSjR1U
Foam rubber tubbing
bit.ly/1SH2pu6
Cutting mats
amzn.to/1N2louV
Barge Cement
amzn.to/1X4TXWS
Dermel 200 tool
amzn.to/1MInS6P
Knife -Box-cutter
amzn.to/1N2n07J
X-ACTO Knife
amzn.to/1pSKlDI
Metal ruler
amzn.to/1pSKpDt
Flexible ruler
amzn.to/1pSKt67
Blade Sharpener
amzn.to/1ZSlBbd
Heat Gun
amzn.to/1RuReWu
Wood burner
amzn.to/1UJwlJT
Propane Torch
amzn.to/1X4W396
Belt Sander
amzn.to/1MIpduc
3M 77 spray glue
amzn.to/1MIpgWQ
Glue Pot
amzn.to/1M8230p
Mog Podge
amzn.to/1X4Wq3D
Kwik seal
amzn.to/1X4WsZm
Weldwood cement, great for sealing foam.
amzn.to/1UJxlhc
Plastic dip spray
amzn.to/1N2rqf2
Ballon latex
bit.ly/1iFoJmd
Black proline tint
bit.ly/1eRx2Hz
Latex tint
bit.ly/P8pdH4
Spray gun
amzn.to/1X4WGPZ
Spray gun repair kit
amzn.to/1pSMNKu
Future Floor wax
amzn.to/1pSMUpg
If your new to cosplay, you should Join the Foam Fanatics.
A great friendly group of fellow makers that are there to help.
Be sure to answer the two questions before joining.
/ eviltedsfoamfanatics
My website eviltedsmith.com
Twitch / eviltedsmith
Facebook / eviltedsmith
Instagram / evilted_cha. .
I’m a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Хобби

Опубликовано:

17 апр 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 196

@daviddicicco1297 10 лет назад

Getting for ComicCon Detroit and as first time costume makers we are so glad to have found your channel. Just finsihed our Colonial Marine armor and pulse rifle. Our next costume will be much better thanks to you. Kudos to your camera operator for great coverage. Thanks

@EvilTedSmith 10 лет назад

Wow, be sure to send me photos when it's all done.

@TeddyGator247 9 лет назад

I don't think I've ever watched a channel so intensely before. Im a student of the evil ed school. Haha. Great great stuff. I'm studying!!!! Thank you!

@EvilTedSmith 9 лет назад

TeddyGator247 Stick to it, and thanks for subscribing.

@andreaforgione7006 10 лет назад

I just wanted to say thank you for your wonderful tutorials.

@eliasramirez1311 9 лет назад

you have really taught me a lot about making foam cosplay armour you have inspired me a whole lot and you are like a mentor to me I really admire your work

@Cheninator96 9 лет назад

I only found your channel yesterday and have already learnt so much! Thank you very much for all the tips you have given me (and others) really helpful!

@blackthornejoshua2929 10 лет назад

Excellent work, literally answered every question i didn't even know i had yet. keep it up man your vids are inspirational

@Tweaked_ej6 8 лет назад

Also wanted to chime in about the roll of foam. I used the exact same large roll but from Harbor Freight Tools. They sell it for $8.99 for an entire roll. They also sell 1/2 inch 2x2 squares in a 4 pack for $10.99. thanks you for all your tips and videos also Happy Crafting

@Kaliprepper 9 лет назад

Thank you so much for this. Im making my whole groups costumes next year for our Dragon Age 2 costumes. This is my first time working with making props and Armour!

@hardapple72 10 лет назад

Keep them coming Ted. These are great and very very Helpful!

@FlonieXD 9 лет назад

I am lovin' everything you do. Your tutorials are so easy to follow! excellent!

@Jones1350 10 лет назад

Great stuff, thanks for sharing your wisdom! I am looking forward to the next build!

@nightshadedesign 9 лет назад

Ted, I am so glad I ran into you and Monsterpalooza. I've been going over all your videos and having a blast. I am a makeup effects guy who is traditionally based in sculpture / mold / cast techniques. Fabrication has been eye-opening for me. Thanks so much for posting these.

@EvilTedSmith 9 лет назад

Ray Shaffer Thanks. I too started in the world of sculpting and mold making. With foam once you make it your done.

@PokuriMio 10 лет назад

your explanations for everything is so easy to understand! thank you so much! looking forward to more videos! :D

@jjnewton33able 9 лет назад

Your tip for the 45s is just beautiful, thanks.

@dawsonboyle99 10 лет назад

LOVE THE NEW INTO TED!!!

@biglmiguel 8 лет назад

dude you are truly a master of your craft and your teaching style is top notch.

@EvilTedSmith 8 лет назад

+biglmiguel Thank you for subscribing.

@Meli_Mel_619 10 лет назад

Very informative! Can't wait to try these techniques.

@SpaceDust 8 лет назад

upside down 45 degree cuts.... brilliant. so clean!!! Ted, thanks for these videos, they are incredibly helpful.

@EvilTedSmith 8 лет назад

Thank you for subscribing.

@mrsthe97 10 лет назад

Thank you for all the great info! I'm looking forward to more videos.

@cherylbrown6746 5 лет назад

Thanks.. Love your channel and I love your website! Keep up the great work. Can't wait to begin creating!!!

@EvilTedSmith 5 лет назад

Thank you for your support.

@hyperguyver2 10 лет назад

Its so great to see someone with a professional background actually contributing knowledge and know-how to the costuming/cosplay community. You sir have my respect and I look forward to leaning more from your videos.

@EvilTedSmith 10 лет назад

hyperguyver2 Thank you Hyperguyer. I take it the you're a GUYVER fan?

@hyperguyver2 10 лет назад

Evil Ted Smith You would be correct, derived the name from the hyper-zoanoids and the guyver units themselves. A very unrated and unappreciated series if you ask me.

@hyperguyver2 10 лет назад

Evil Ted Smith Now I feel like an idiot, I should have realized you were in the Guyver movies! >_

@EvilTedSmith 10 лет назад

hyperguyver2 Ha ha. That's OK.

@hyperguyver2 10 лет назад

Evil Ted Smith well I will be paying attention to your videos since I do have the ultimate goal of building my own personal Guyver suit.

@jasonanderson9757 10 лет назад

Evil Ted! My good friend Junis told me all about you! (all good things!). Your videos are inspirational!

@DaedalusProps 10 лет назад

I love this video man. I'm a newbie with foam, so this is absurdly helpful.

@OrvisEvans 10 лет назад

Great channel, man. Thanks for sharing your knowledge.

@tinaryan4023 7 лет назад

like TED Talks....but better. You are a legend around the Cosplay forums - Evil Ted references pop up all the time

@lancer525 7 лет назад

Ted: For what it's worth, you can also use flexible acrylic paints called "Americana", and "Folk Art". Since you have a Michael's out there on the West Coast, they're available there. The metallics of these acrylic paints are called "Goldens" and they come in 2oz bottles as well as 10oz bottles. I use a foam brush to apply. I do RC aircraft made from 1/4" blue insulation foam or 6mm Depron foam, and spray paints can't be used on these because the propellants eat up the foam, so that's where the brushed-on acrylics come in. If you have an air compressor, and you do, then you can get an inexpensive airbrush kit for around $30 and there you go. I really like your tutorials. You produce some very good stuff!

@robynel5401 10 лет назад

Awesome videos! Keep them coming!

@Greg5560 10 лет назад

Awesome stuff, can't wait for more videos

@Greg5560 10 лет назад

Do you have any tips or ideas on how to apply a plume to a helmet. Not like a full Corinthian type, just a ponytail type; like you would see on the vampire helmets in underworld

@blogobre 10 лет назад

Wow great tip about the sharpener.

@shieraseastar3321 8 лет назад

You're so helpful, I hope I can do something like what you teach in a future and I would love work as an artisan, you're such an inspiration.

@EvilTedSmith 8 лет назад

+Shiera Seastar Thank you for your kind words.

@docshowsyouhow 10 лет назад

fun stuff here sir, many of you techniques usually only seasoned pros know. not only that but some would consider it to be proprietary information and would refuse to share the knowledge. I enjoy your videos and you have made me seriously consider starting a video blog.and the tag line "evil ted talks" thats clever.

@AtlasGuitar 9 лет назад

Thank you SO much for this. For whatever reason. even though I've thought about the costume I'm planning to make a lot, it never crossed my mind to cut the foam out at an angle. I feel a bit stupid, especially since I had been thinking about the edges as much as I have.

@IconicProps 7 лет назад

I make my patterns out of something more rigid like transparency paper. Your drawing hand is very smooth compared to a lot of us.

@kevinmoss2778 8 лет назад

thanks for your dream and insight, just started to make helmets and looking forward to start other great stuff, thanks for your time kevin moss rocky mountain adventure park & resort

@codynetzel4999 10 лет назад

I find your videos very helpful

@zachcowley779 9 лет назад

HEy, love the videos. Hoping to take the ideas from here and make my own stuff once i have supply money. Can you do a video about attaching straps and the likes for things like greaves and gauntlets? Also, maybe some tips about working with thermo-formable plastics

@sithinstructor 10 лет назад

When enlarging the part I might use a drawing compass. Thank you for this video, very helpful.

@blainedrayer4776 9 лет назад

Ted if you set a compas to the offset you want you can scribe your original pattern line the distance you are looking for.

@mainstay. 9 лет назад

This is great, I'm going to try making a costume for my son. I like the detail, piping, 45 degrees, Dremmel made 'bolts'. I use a CNC Router at work, I wonder if I can put a piece of foam securely attached and dial in some designs to 'etch ' into a pattern.

@akdadoftwins 2 года назад

love the content bud. thank you for what you do.

@EvilTedSmith 2 года назад

My pleasure!

@Ryu62Alpha 9 лет назад

These are fantastic!

@EvilTedSmith 9 лет назад

Thank you.

@xyzvision 9 лет назад

Thanks Evil. I think you're great. You inspire me.

@EvilTedSmith 9 лет назад

xyzvision Welcome, and thank you for wacthing.

@brahimnyior71 4 года назад

Thank you this good information, Ted

@MrFrogmasterG 7 лет назад

"A friend you can trust" Yep, I can see that going wrong! Duct-tape hair removal!

@kevinmarsden6107 10 лет назад

Hi Ted These vids are great! I made my first foam helmet last week by watching the step by step process and to my surprise came out perfect..apart from the snug fit! I should of watched this video first duh!! Anyway, I'll try another one soon and use this video as my new reference, many thanks!

@EvilTedSmith 10 лет назад

Thank you Kevin.

@miguellopez319 10 лет назад

Omg ted you are amazing and thank you so much for the channel. I am a costumer and have discovered how awsome a material foam is. Your foam helmet tutorial has taught me so much. Once again thank you for sharing with us all.

@EvilTedSmith 10 лет назад

Your welcome Miguel. Please send me a picture of you helmet when it's done.

@miguellopez319 10 лет назад

Ok stupid question time lol how can I share pics of my current foam costumes with you

@miguellopez319 10 лет назад

Ok found you on fb sent you a friend request

@EvilTedSmith 10 лет назад

Post them to my Evil Ted Smith page. As a post or in a message. Thanks

@PirateTravisJohnson1 10 лет назад

Evil Ted Smith I customizing a MegaMan Zero (X) helmet. YOU were SO VERY HELPFUL!!! Thank you.

@user-qc8uy8sb1c 4 года назад

You are the nuts!!! Truly remarkable. My mind exploded.

@EvilTedSmith 4 года назад

Thank you for your support.

@consciusmachina 9 лет назад

Thanks Ted another vid full of top tips!! I hope you make more of these! Question: what was your favorite job or creation so far?

@EvilTedSmith 9 лет назад

Andrew Greener It's hard to say. So many films I've worked of I'm proud of, and so many others were just jobs. The thing I'm still proudest of is the Guyver unit from The Guyver. Thanks for subscribing.

@amireliad 9 лет назад

Ted, you're awesome!. that's all. (having great time making stuff with your help)

@EvilTedSmith 9 лет назад

Amir Eliad Glad I could help!

@DannyEastes 9 лет назад

Hehe, making the helmet bigger seems so obvious now! My brother has a head cast, though my head is significantly larger. I thought I was going to have to buy a second, but it seems this technique saves me the trouble! Awesome videos!

@EvilTedSmith 9 лет назад

DEASTES Good news! Thank you for subscribing.

@666nibelheim666 7 лет назад

WoW nice job

@othersideproductions2776 10 лет назад

Awesome!!!!!

@nine_tails137 7 лет назад

Ted, can you make a video on how to make a mouth-guard for your helmet? Sort of like the Megazord and Gundam Heads for example.

@MichaelAcosta 6 лет назад

Thanks for all your vidoes, Ted! I just following your channel and doing some crafting on the side. I had been given some old/used foam floor squares that are pretty roughed up. Besides good ol' soap and water are there any good cleaning agents that you can recommend (or even ones to avoid) for EVA foam?

@stephenspencer8356 9 лет назад

awesome work!, i was wondering if you consider doing a metroid helmet?

@OrangeBlood485 10 лет назад

You Rock Ted!!!

@EvilTedSmith 10 лет назад

Thanks Peter.

@Belphagor13 7 лет назад

Hi Ted. I love your channel. It's super helpful. I am having to do some work with EVA-30 atm, which is much softer than the EVA-60 floormat foam and I am having a hard time getting clean edges. I find that the dremel tends to eat it rather than five me a smooth edge. What's ur best advice for working with softer foams?

@eliasramirez1311 9 лет назад

can you make a video in detail how to make leg armour.

@dungeonsdoodads4306 8 лет назад

Awesome video! How do you keep your curved lines so clean? I bought some foam and snapped down to a fresh sharp blade, but for the life of me I can't make a smooth line! Even with a line to follow, it always pulls off to one side or another.

@hijostar9037 7 лет назад

Hi Evil Ted,First off I appreciate you and your work it really help me mentally and now i do cosplay as hobby now.Anywho when resizing a helment do you add the half inch on the side of the helment and also on the top part?or do you just add some inches to just the side?I use a 23" head maniquin but still get a tight fit.Please if you get a free 30seconds even I would like your help.Thanks and have a nice day.

@mediarow 7 лет назад

Hi Ted, love your videos. Please can you tell me what you used to bond the acrylic dome to the wooden pole for your foam anvil. Thanks.

@EvilTedSmith 7 лет назад

5 minute epoxy.

@michael_coles 10 лет назад

I really need to get one of those sharpeners.

@EvilTedSmith 10 лет назад

i have a link below for the sharpeners.

@twilightsazuka91 9 лет назад

Your videos have been an endless source of help for me!!! Quick question: I'm making an axe and wanna get a nice edge and it's a pretty thick bit of foam, the edge I wanna make is more graduated and acute than 45° so do I just adjust the angle at which I hold the blade against my cutting surface? I'm finding it difficult to explain haha I hope this makes sense :)

@EvilTedSmith 9 лет назад

If you're having trouble cutting it, you can sanding the angle down.

@johnnyno1279 9 лет назад

Harbor freight has 4pack of 1/2"(ithink) anti fatigue mats that often go on sale for about $7-$8.

@EvilTedSmith 9 лет назад

Johnny No Wow, what a deal! Thank you for sharing.

@2485williams 9 лет назад

Hello Ted. I would like to thank you for your instructions on creating helmets from foam sheets. I currently use your method for making masks and helmets from paper mache sheets. I did encounter as you mentioned in your video a close mask fit when I made my first helmet. My question to you is how much length do you have to add to your pattern to get a comfortable fit? Is it determined by the thickness of the material? Thank you in advance.

@ColorGuardGuru 8 лет назад

if you have a rural king in your area, i got a 4ft by 8ft thing of the thinner foam for around ten bucks, 14 if not on sale

@EvilTedSmith 8 лет назад

+eppleptaurus Thanks for the tip.

@Gelathius 10 лет назад

Ted when you are painting or something timely don't cut out the vid but fast forward

@justinduggan7023 10 лет назад

More videos man.

@allys.8629 9 лет назад

Could you make a simple and cheap tutorial. I don't care what of, I just need one for my cosplay club i am starting in high school in a few weeks. You make amazing tutorials that are very clear and easy to follow and your costumes turn out amazing. I am trying to find a tutorial that can be done in about an hour to an hour and a half(not including painting) and that uses craft foam and hot glue and other stuff that you can easily buy and use for a group. If you can't make one, do you know of any? I was thinking maybe bracers or something similar

@donaldashcraft3863 8 лет назад

is there any particular part that should be enlarged for this to work? or could it be anything along the top or side of you head.

@NinjaBri689 8 лет назад

Hey! Love your videos! I have been searching for foam all over and Pep Boy's isn't local to me, and their website is impossible to dig through. Is there anyway you could post a link to that roll of foam you were talking about?

@EvilTedSmith 8 лет назад

+Brianna Kelley Here you go.. www.amazon.com/gp/product/B00BCSA9SW?ie=UTF8&camp=1789&creativeASIN=B00BCSA9SW&linkCode=xm2&tag=thevtech-20

@d33f4ult5 7 лет назад

Hi Ted, I have a foam head that I used to make my template but when I extended the lines on the side pieces the registration marks didn't line up with the ones on the center piece and the center is too small for the sides! How should I go about fixing this?

@CafeBikeGirl 8 лет назад

Dude, I just watched this video and your number of subscriptions is exactly 2 orders of magnitude larger (100,420) than when you made it, far out!

@EvilTedSmith 8 лет назад

Thank you.

@Julianacadeco 8 лет назад

Ted, you have a tutorial that teaches how to make the armor legs?

@EvilTedSmith 8 лет назад

+Juliana cadeco Not yet...

@akmalbudiarisusanto3032 6 лет назад

Evil Ted, are you making your own pattern from the head statue only? Then how do you make a pattern from a 3d models? Are you making it from the head statue too?

@landwand 9 лет назад

Hello Ted, I've been working with foam for a while, and I would really enjoy how you get around two issues: - impact fragility and wrinkling (I have largely stopped using foam and am moving to Worbla for that reason) - how you fill seams while retaining flexibility (if possible)

@landwand 9 лет назад

Hi Ted! Literally 15 seconds after I typed out my message, your video kindly addressed this!

@rinnegan8121 6 лет назад

hey ted . a favor please this for my project in PERDEV can u make the armour of achilles from troy .... this is a please

@lorepreuss5015 8 лет назад

Hey Ted. You note about using the clear Plastidip on top of the paint for added flex. I did that on my first go at cosplay (before I watched this) and have peeling issues with it so I figured I shouldn't use it as a top coat. Do you do anything else after your clear plasti or have any suggestions and I thought it might help keep it durable on top but it just keep peeling off and looking terrible. I haven't come across anyone else yet who's done this. Thanks for your time and the vids - helps us newbies out a ton!

@EvilTedSmith 8 лет назад

+Lore Preuss Yes, Lore. I be having the same problem of it peeling off. So now I just use the floor wax to seal my paint job.. I have my supply list just below my video.

@lorepreuss5015 8 лет назад

+Evil Ted Smith Thanks, Ted! I'll check it out!

@mikehartsough489 8 лет назад

Evil Ted: I'm working with foam for the first time. I want to make a seamless 90 degree angle. I've made 45 degree beveled cuts on the back side, now I'm wondering whether to heat-shape the foam, cement it, or both. What would you recommend? Thanks!

@EvilTedSmith 8 лет назад

+MikeHartsough My adive for everyone is to do it. If it does not work as you wanted it to, try again.

@ShadowxOfxFlames 6 лет назад

Just watching this video. When you add the 1/4 in. to the side pieces, do you also have to add it to the middle piece of the helmet as well?

@EvilTedSmith 6 лет назад

On just the one side, so when you make both parts it will be bigger.

@ShadowxOfxFlames 6 лет назад

Awesome, i was experimenting with it and just couldn't get it to work quite right. back to the paper model lol

@ColdFusionPower512 8 лет назад

for a headcast if i don't have one could i use one made of polystyrene? they are really cheap but i don't know if they are good

@EvilTedSmith 8 лет назад

+ColdFusionPower512 I have a supply list below my videos.

@rikkiblaker1760 9 лет назад

Sorry if you have already answer this question but when painting the foam do you use the Plasti Dip before you start painting or after? I just don't know the order of what the base and top coat are suppose to be because i want the paint to stick to the foam without it cracking or pealing off.

@EvilTedSmith 9 лет назад

Rikki Blaker I cover that in almost all of my videos. So start watching!

@craigjorgensen1986 9 лет назад

Any recommendations for doing a rounded edge? Right now i'm thinking making a straight 45 angled edge and then sanding it until it's rounded, but i'm worried about getting an inconsistent thickness.

@EvilTedSmith 9 лет назад

Craig Jorgensen Yes, I show you how to in How to Make Female Armor video.

@drshezy 9 лет назад

Mr Ted .. can u use foam instead of cardboard to make the following mask... i want to make the mask with foam and then plastidip the foam to have a matt finish ... #23: Batman Cowl DIY 1/3 - cardboard, cut & hot glue (with template)

@WorldZaz 9 лет назад

good work man :) i lave it

@EvilTedSmith 9 лет назад

AHMAD NOOR Thank you!...You lave it, or do you love it?

@WorldZaz 9 лет назад

I love it *

@WorldZaz 9 лет назад

please can you make noob saibot mask

@hollowedkyuubi8059 6 лет назад

Hi! Is it ok if I use corkboards? Hard to find eva foams in my area

@EvilTedSmith 6 лет назад

I'm not sure, I never use cork board like that.

@causticgreed3461 6 лет назад

What type of foam do you use? And where can I buy it. I 've been searching, but can't find any foam that looks like what you have.

@EvilTedSmith 6 лет назад

Check my supply list..eviltedsmith.com/supplies/

@MegaBusterMovies 9 лет назад

Hey Evil Ted was wondering if there was a way to get cheap costume jewels? If i could carve out a piece of foam and paint it to look like a jewel that would Amazing!! Im not sure if I should use a gloss type paint. Any help or advice would be greatly appreciated thank you.

@EvilTedSmith 9 лет назад

MegaBusterMovies You could use real costume jewels. Just glue them on on.

@MegaBusterMovies 9 лет назад

Evil Ted Smith that's a good idea but I need a custom shape so I'm not sure what to do thanks again

@colinluke2840 9 лет назад

If you really want to get picky about keeping the outer line of the enlarged pattern perfect, couldn't you also use a compass and put the pointy end on the original line and scribe a new line that's 1/4" all the way around?

@GenerationNerdy 9 лет назад

Hey Evil ted how do you get the perfect beveled edge on curved pieces with a box cutter?

@EvilTedSmith 9 лет назад

Patricia Salyers With a bad saw..

@guiltyspark0343 8 лет назад

Ted I'm working on a wolverine cowl and do you have any tips for doing around the eyes on a cowl

@EvilTedSmith 8 лет назад

Yes, you can use thinner foam.

@guiltyspark0343 8 лет назад

+Evil Ted Smith thanks ,I'm a bit nervous due to this being my first foam build and thank you for all the informative videos

@Mal_3D 9 лет назад

R.I.P. to headphone users after that intro xD

@cheesewizz3139 8 лет назад

I am trying to make a sensei hat out of card board, but I don't know how to make the perfect circular shape. Can you make a tutorial on how to make a circular shape please. Thank you.

@kyokitty1 8 лет назад

You just need to cut out a circle with a dart or two in it. I suggest foam instead of cardboard.

@tomranillo177 8 лет назад

How can you stick a foam protector into a smart balance wheel???? Im tryin to make protectirs for mine so what kind of paste or tape or glue can i use to avoid markings?

@EvilTedSmith 8 лет назад

+Caved Music To avoid marking, I use a pencil.

@tomranillo177 8 лет назад

thanks a lot..... cheers...

@henshinplex 9 лет назад

Hey Ted do you know how to make visor pieces?

@EvilTedSmith 9 лет назад

henshinplex If you want a clear or tinted visor? I just buy motorcycle helmet visors.

@justinharrison6522 5 лет назад

Hi Ted I love your videos and I wanted your help in making a speed racer helmet can you help me at a shop

@EvilTedSmith 5 лет назад

To help you make your SPEED RACER helmet. Here are some visor you could use. www.chutingstar.com/gath-replacement-retractable-visor-6

@coyohti 9 лет назад

On the enlarging segment: On that particular helmet pattern (assuming it's the same from the helmet demo) wouldn't you also need to size up the other pieces (the middle section)? Or am I overthinking the process?

@EvilTedSmith 9 лет назад

Merry Calliope You only need to do one side. If you do the middle it'll get too big.

@coyohti 9 лет назад

Evil Ted Smith Thank you! I knew I was over-thinking things to the point of confusing myself. ^_^;

@TheCherryTrader 8 лет назад

Ted, I'm about to start a helmet (Guard helmet from skyrim) do you think 10 or 12 mm thickness will do?

@EvilTedSmith 8 лет назад

10mm Or 1/2 floor mat foam will work.

@TheCherryTrader 8 лет назад

Evil Ted Smith thank you for the quick response ted! I just wanted to say your videos inspired me to start cosplaying, and have gotten me out of a deep slump of depression. I love them, thank you very much.

@EvilTedSmith 8 лет назад

I'm glad this helps you get out of that depression. Pick a project, then build it.

@MerVidiuMII 10 лет назад

When you cut the foam at 6:35 do u have to puch hard, or was it like cuting butter?

@EvilTedSmith 10 лет назад

Like cutting butter…Just need to have your blade sharp.

@MerVidiuMII 10 лет назад

Nice to know, thank you :p

@PirateTravisJohnson1 10 лет назад

Evil Ted Smith @ 5:50 or so... Exacto makes a 45* cutter that I use, but it doesn't cut deep enough. I MUST upgrade to a hot knife.

@EvilTedSmith 10 лет назад

Yes, you need to get a box-cutter knife. That's what I use in the video.

@alejandroalcantara281 7 лет назад

Hello, I have a problem, I buy a pack of foamy Fuxion brand of 10mm thick blue and green, the problem is that every time I cut it with the razor this folds, what is wrong? Is foamy different? I bought new knives and still the foamy folds, what can I do?

@EvilTedSmith 7 лет назад

The first thing I would say is you need a sharp blade, but you say you have new blades? I have not hear of Foamy Fuxion. Could you send me a link so that I can see it?

@alejandroalcantara281 7 лет назад

Thanks for replying Evil Ted, I realize that it is the same fomi, I was able to achieve perfect cuts last night sharpening my razor with a sandpaper, I do not know if a razor sharpener is needed, thank you anyway, and you do an excellent job, by the way. Which I have subscribed to for a few months, Supporting me on your advice and I will continue to see you from Toluca State of Mexico, good day Ted, continue inspiring me.