Factory direct waste tyre pyrolysis plant recycling tires into oil working process 

I like your Carbon discharging system

This the to go, so as to save the world.

Administrator contact me Technology for removing stinky odor from tire pyrolysis. Removal is carried out by heating and adding several chemicals

I m Dawit from Ethiopia.. I want to have this recycling plant. Would u please provide me the capacity range, total area requirment, estimated cost for turky with other preparation like power source and requirmwnt and other utilities.... remain

This video needs detailed explanations for each stage of the process. Also, it does not show many aspects of each stage of the process, for example the first yellow vessel i assume has water which the gas passes through, this would capture impurities so what happens to this contaminated water as the level of impurities increase? Then the second yellow vessel doesn't show it's purpose as it seems that the gas just passes from one pipe and out the other - is it a buffer vessel? The third and fourth yellow vessels, are these sulphur wash towers or what is it's purpose? Then the fifth yellow vessel - a dowsing tank? - that sends back the gas through the pink pipes to the furnace? Thereafter we are taken back to the heater and begin following the next exit pipe out the top into a another wash tower with the contaminated water drained out into a pit, this alone is hazardous as it could have entrained flammable substances and possible fumes evaporating from the open pit. Where is the exit steam from this wash tower going to? The video suddenly switches back to show the solid carbon ash being extracted from the bottom of the furnace, solids do not flow so easily as liquid would on a horizontal surface, so what happens to the solid buildup on the further end of that exit hole? Thereafter the video shows a series of archimedean screws to move the ash carbon along,...... So much isn't explained in this process. Pyrolysis is a process of converting various waste materials into oil, this video hardly focusses on that aspect of the process and so much effort is shown handling other phases, eventually the ash carbon material as i understand it to be is bagged, so what happened to the oil? Leaves me misunderstanding the objective of this process. Sorry for my ranting but i have refinery experience from distillation to catalysis to Fischer Tropsch synthesis and i find your video least informative for showcasing pyrolysis as the name says, forgive me if i misunderstood, I've watched it twice.

Can all types of plastic be used in process or some specific ones??

El acero donde está

Can you process PVC?

How much is this plant? can you bring it to Fiji Islands and install?

كم السعر للخط المستمر كاملا

Contact with me