First layer of PLANKING - Ship modeling FIFIE - Part 4

Подписаться 6 тыс.

Просмотров 95 тыс.

50% 1

Making the first layer of PLANKING - Ship modeling - FIFIE AMATI Part 4
Planking the hull of ship models is certainly one of the most complex and most difficult construction phases to learn for a novice model maker, and running into mistakes is really easy.
If you missed the other video of this building log you can find them here, I made a playlist with all the related videos:
• RC Fifie Amati 1/32 fr...
↪️ Are you building a model ship with a curved bow? Then watch this HMS BOUNTY: Amati Step By Step Model Ship Build - First layer of planking
• First layer of PLANKIN...
👣 Check out my new video on the second planking, I made some important adjustments to the shaft sleeve
• Second layer of PLANKI...
🏃‍♂️Or jump directly to part 18 about sails and masts
• Model ship - Fifie Ama...
If you want to support me in creating more content like this, please consider subscribing to the channel ✅
📽 My suggestions on what to watch next:
⭐️ Hand tools for bending wooden planks: • TOP 2 tools for BENDIN...
🎥 If you're just starting building ship models check out my basic training videos:
⭐️ Playlist: "Model ship building for beginners": • Model ship building fo...
⭐️ Playlist: "Basics of rigging model ships: tutorials and techniques": • Basics of rigging mode...
⭐️ Fixing deadeyes at the same eight: • Ship modeling - How to...
📸 Check out my two full video logs:
📽 My suggestions:
⭐️ 5 things I hate in ship modelling: • 5 THINGS I HATE in Shi...
📸 Check out my full video logs:
⭐️ Full video log "HMS Bounty 1787 1:60": • HMS Bounty step-by-step
⭐️ Full video log "HM Sherbourne 1763 of Vanguard Models" • HM Sherbourne of 1763
⭐️ Full video log "The Dorade yacht 1:20": • The Dorade Amati Scale...
⭐️ Full video log "The Whaleboat of New Bedford 1860": • [Unboxing] Whaleboat o...
⭐️ Full video log "Scratch built Fifie herring trawler": • RC Fifie Amati 1/32 fr...
⚒️ WHAT I USED?
Bosch Primo (EU): amzn.to/3lW2z6v
Other similar sanders like this one (EU): amzn.to/3wWxbtJ
Or this one for US: amzn.to/3QEgFHP
Water resistant glue Titebond level 3: amzn.to/3y8jFFm
Do you want to access my video before anyone or simply support me in the making of these videos? You can join the Tagliamare member's community here below👇 =) Members will be recognized on the channel's home ⭐️
/ @tagliamare
#amatishipmodel #shipmodel #shipmodeling
0:00 Introduction
0:40 Measuring the bulkheads
2:28 Tapering
5:06 Garboard strake and keel rabbet
8:42 Fitting planks Bow and Stern
10:10 Stealer plank
10:58 Fitting the final plank
14:20 Sanding and final touches

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@daaikuu 4 месяца назад

Very impressive, though as i am getting on in years, i had difficulty hearing you, but very impressive work. You have inspired me.

@Tagliamare 4 месяца назад

Thanks :) you can activate captions. I wrote the subtitles myself so that people can just read and watch if they have any issue with audio

@Beginne_ship_modeler Год назад

Finishing the ship is my favorite part of the job)))

@normg2242 5 месяцев назад

Extremely satisfying!

@condorz4s 8 месяцев назад

شكرا على هذا الدرس المفيد Thanks.

@leeedsonetwo 10 месяцев назад

Thanks for sharing your methods, really useful for newbies like me.

@Tagliamare 10 месяцев назад

Really happy you found it useful =)

@jerzeyvermont Год назад

Nice idea on the aluminum channel as a jog for the tapering. Will put that idea to good use.

@Tagliamare Год назад

Glad it was helpful!

@brianhanington470 2 года назад

Truly helpful. Thank you so much for sharing your technique!

@Tagliamare 2 года назад

Thanks Brian!

@colinsmith4699 4 месяца назад

A good video

@eddygonzalez6018 2 года назад

You nailed your planks instead of using glue. I think it's geat, very authentique. Although I was hoping you showed us how you caulked the boat.That would have been awsome. ; )

@Tagliamare 2 года назад

Hi Eddy! Thank you =) I will apply a second layer of planks on this boat. Since it will be an RC boat I will probably be using resin to make the hull waterproof

@s737500 Год назад

you make it look easy......thanks for the video

@mohsenkhalatbari4599 Год назад

Thank you very much for your professionalism and your ability to accurately introduce the required materials and sizes as well as work methods

@Tagliamare Год назад

Thank you very much! Really appreciated

@sebk2976 7 месяцев назад

Great video. Very clear and helpful. One question though: you taper all the planks first, having calculated the required width at each bulkhead. Yet, later, you taper individual planks again, even though they should already have the correct width. Why is that necessary? And why does that not result in gaps, since the twice-tapered plank is now narrower than it should be? What am I missing?

@Tagliamare 7 месяцев назад

Thank you! Simply some planks might need to be tapered in a specific way or you need just 2 of that shape. No need to bulk

@widescreennavel 2 года назад

I appreciate your channel so much! I am learning a lot, am about to build a Sterling 40" planked powerboat. Your work is really beautiful; being able to watch you work is worth about a thousand books. No detail is too small, since these problems loom when we build and seeing how a pro foxes the glitch is very informative. May I ask what type of filler or putty or Bondo you are using? I am already going to use the Tightbond...

@Tagliamare 2 года назад

Hi! Thanks for your comment I really appreciate it :) For this model, after applying a second layer of planking I will be using a special resin for Ships’s hulls as this will be an RC boat. The resin will fill the small gaps between planks (if any) and seal the hull. Gaps have to be really small though, using fillers or putties or bondos to fill gaps is not best practice especially for RC wooden boats. If your boat is just for display and you want to keep the natural look of wood then you can think of using shellac (still no gaps between planks) :)

@dugan6056 Год назад

First rule of planking. No plank must ever finish at a point!

@AllAboutUFC Год назад

Thanks for the video! I wish to start my adventure with wooden models but the amount of effort required to do planking correctly scares me off :-)

@Tagliamare Год назад

Don’t be afraid of making mistakes and take your time :)

@batyragayev5084 3 месяца назад

Надо было наточить карандаш.

@hugoagogo4324 2 года назад

Brilliant planking best I've seen does the same principal apply with kit ships how you've planked ?

@Tagliamare 2 года назад

Thanks! That’s very kind of you :) yes it’s the same principle! Of course it depends on the model: a model with curvy lines might require a bit more attention

@dugan6056 Год назад

Generally yes, but the plank will require bends and twists to prevent buckling. The best jig is your hull. Soak the plank and clamp into position, let it set, it's now a perfect fit.

@Tagliamare Год назад

91% of the people who watched this video did not subscribe to the channel. If you want to support me and encourage me in making more videos about ship modelling you can show me your appreciation by subscribing to the channel, it's free =)

@pwsod Год назад

We have seen you use several pieces of equipment and was wondering if you would do a video of the different tools you use please?

@Tagliamare Год назад

Hi @pwsod! Thanks for the suggestion, i was already thinking of making a complete guide of tools needed. I already published a video on the top 6 electric tools any modeller should have, you can find it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S48aNtaZdko.html

@pwsod Год назад

@@Tagliamare Thank you Tagliamare.

@Blaze_1961 6 месяцев назад

Can you show how to plank a pointed bow hull like on a Baltimore Clipper?

@Tagliamare 6 месяцев назад

The technique should be pretty much the same the one I show in the video =)

@Blaze_1961 6 месяцев назад

@@Tagliamare The planks on the clipper are extremely tight on the bow, a lot different than this ships hull. It's ok I'll find my answer elsewhere. thanks for the reply.

@v8cool168 Год назад

How do you work out the taper of the planks ? My dad has left me two of these wooden ships as well as all the material. He's to old to finish them so gave the whole lot to me. He assembled the basic hull structure , but no planking yet.

@Tagliamare Год назад

Hi! You can see how i taper the planks at 02:30 and how i work the stealer plank at 10:05. Planking is not an easy job, but you can manage! Just don't rush, good luck =)

@v8cool168 Год назад

@@Tagliamare Sorry, what I meant was how do decide how much to taper them by ?

@Tagliamare Год назад

@@v8cool168 You can see that at 00:41

@adminjava1 2 года назад

Where can one get the metal channel tool that you use to hold several of the planks in place while you sand them together?

@Tagliamare 2 года назад

Hi @Booterman, it’s a U shaped aluminium profile. I bought it in a hardware store

@adminjava1 2 года назад

@@Tagliamare Thanks! Just picked one up. Btw, kudos on your videos. I have viewed many but yours are the best. You have taken the time to position your camera so the viewer can easily see exactly what you are describing and doing. Too many others are too far away or block the view, making it difficult to learn.

@Tagliamare 2 года назад

@@adminjava1 This kind of comments really encourage me in making more video =) Thanks @Booterman!

@adminjava1 2 года назад

@@Tagliamare Great! I and a host of others are counting on you (I figure I have a year’s worth of work ahead of me and will be looking at your videos for tips, tools, and techniques!

@dprhtz3047 Год назад

That Looks so hard 😭 I dont know how to get started with it

@Tagliamare Год назад

Hi! It's easier than it looks, trust me. Watch the video slowly so that you can understand every step. Most important thing just take your time, no need to rush into things. If you feel tired or anything just retry the next day =) You can do it!

@donaldsmith1217 Год назад

haven't seen anything lately on the fifie, are you still working on it?

@Tagliamare Год назад

Hi Donald, bit busy at work lately. I’m working on the second layer of planking at the moment. Hope to release a new video soon :)

@donaldsmith1217 Год назад

@@Tagliamare

@donaldsmith1217 Год назад

I just found your video on RU-vid. I will be starting a build log on the Model Ship World forum soon, as I build my Amati Fifie.

@Tagliamare Год назад

@@donaldsmith1217 that’s great! Are you going to scratch build too?

@donaldsmith9103 Год назад

@@Tagliamare no, I have the Amati kit

@Litotryptor 3 месяца назад

What is optimal thickness of planks?

@Tagliamare 3 месяца назад

It depends

@Litotryptor 3 месяца назад

@@Tagliamare I’ll go with 2x6mm

@Tagliamare 3 месяца назад

If you make two layers and your planking is good than you should be fine

@mohsenkhalatbari4599 Год назад

Please focus more on the educational aspect, especially the sizes and maps

@Tagliamare 2 года назад

You can find the other parts below: Part 1: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EDV3IEmmmew.html&t Part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3D-ISTafaU0.html Part 3: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n80xr0VYC6s.html Part 4: you are here Part 5: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bZgRYk_XQ4E.html Part 6: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aqHfI0svbiA.html Part 7: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xs6TW6OSuGE.html Part 8: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-baCRjx6DboI.html Part 9: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BhsX4KeVuHk.html Part 10: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TW5NT5xE9V4.html Part 11: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FXk-H0ZgNt4.html Part 12: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CybjsdaI1J8.html Part 13: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xwO1jg15m_4.html Part 14: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iFn1tpDTDgg.html part 15: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LnepjXmAfVc.html or you can check out the full playlist: bit.ly/3pz1Jyl