No video :(

Fix your primer before painting your car.

Подписаться 67 тыс.

Просмотров 11 тыс.

50% 1

In this episode, I'll share some tips and techniques to fix your primer before painting your car and how to correct pinholes and waves in your primer. How to use a guide coat, block and evaluate the surface before you start applying paint. Be sure to check out my other videos to help you " BUILD YOUR SKILL"
Previous videos part 1
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Repair a dent before filler
• Damaged fender! how to...
Previous part 2
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Auto body tips and techniques
• Auto body filler tips ...
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
dura gold dry guide coat
amzn.to/3LudJNq
ultra fine sanding sponge 800grit equivalent
amzn.to/440wfED
motorguard flexible block
amzn.to/3USBwZL
velcro to make hook and loop block
amzn.to/3UUyiFk
usc Icing glazing putty
amzn.to/3i0CtRq
upol 2k primer
amzn.to/3OzRRQZ
body filler speakers assortment
amzn.to/3tIYJSh
Iwata kiwami4
amzn.to/3xs9k7a
mirka dustless sanding system
amzn.to/2XLLNOR
prep solvent
amzn.to/3FCoRl7
1500 mirks scuff pad
amzn.to/33Ecnfy
dura gold 600 hook n loop
amzn.to/3qxfYoR
dura gold 180 grit hook n loop sandpaper
amzn.to/3nx1IdP
clean sheets mixing board
amzn.to/3KiimYz
1 1/2 masking tape
amzn.to/33ynYgh
overspray protective plastic sheeting
amzn.to/3FsgFUx
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Опубликовано:

22 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@SomeGuyInSandy Год назад

I am loving that A610 spray gun. I used it yesterday for the first time!

@GarageNoise Год назад

Awesome! I love the material savings and low overspray.

@SomeGuyInSandy Год назад

@@GarageNoise Thank you for the review!

@GarageNoise Год назад

@@SomeGuyInSandy yw👍

@setthehook4me Год назад

Another great video. Thanks Chris

@GarageNoise Год назад

Thank's brother! appreciate the comment and support!

@JohnWD40TC02 Год назад

Very interesting instalment Chris, I keep saying this but you always explain what you are doing at each step in a way that us DIY/Hobby painters can understand which is a massive help, just wanted to ask if you prefer the metal or plastic spreaders when applying your filler/glaze do you find that the metal ones dig in, I also like your guide coat as it seems quite black and dense where I use the Mirka black powder one and it's almost a dark grey making it hard to see at times👌👌👍John UK

@GarageNoise Год назад

Appreciate it John! I really don't have a opinion on spreaders the plastic ones are nice cause you can cut them down if you need something small. The steel is a bit more flexible not much. Appreciate the comment and support brother!

@OzFamily06 9 месяцев назад

2 quick questions... 1. How to I make sure that all the scratches that could be visible through base coat are eliminated? Should I use dry guide coat etc to see if there are any scratches left and keep sanding until they're gone? 2. I did just want I mention in question 1, must have left some 180 scratches and did not spot it in the primer, now the scratches are visible through the base. What's the best way to fix it? I have not applied clear yet. Thank you.

@GarageNoise 9 месяцев назад

You can sand the basecoat with 600 ,you may sand into the primer but that's ok, then tack it of apply more base and clear. Appreciate your question and support. Yes, guide coat to check for scratches is the thing to do.

@Danno74Z Год назад

Hi Chris, At the start of the video you used 320 grit sandpaper. After sanding you noticed a pin hole and a small flat spot so you used some glaze. At approximately 4 min mark a caption comes up to apply glaze over 180 grit sandpaper. Unless I missed it did you change paper back to 180? Thanks.

@courtneylewis9500 Год назад

Great video i love it

@GarageNoise Год назад

👍thank you! Appreciate your comment and support!

@sheerwillsurvival2064 Год назад

Awesome

@GarageNoise Год назад

👍

@sheerwillsurvival2064 Год назад

Should you do the same with spray bomb filler primer..and same grit paper?

@GarageNoise Год назад

Stay away from spray bomb primer unless it 2k. But yes same grit sandpaper. Appreciate the comment!

@sheerwillsurvival2064 Год назад

@@GarageNoise ok Chris just ordered spray max 2k filler primer hope that’s the ticket 👊🏻 throwing the Rust-Oleum away

@octanegarage3729 Год назад

Great video. And yes, that has happened to me. Lol 😂

@GarageNoise Год назад

👍

@chicagopd-best Год назад

Hi I am wondering why is not better after spaying primer,spray just a bit of base coat from distance and effect is even better rather using guide Powder

@GarageNoise Год назад

You could do that but basecoat won't sand off like the guide coat it also gums up sandpaper and is more expensive than the guide coat. Appreciate the comment and support!

@troyadams1076 Год назад

Another one good

@GarageNoise Год назад

Thank's brother!

@wow8991 Год назад

Hello, which needle/nozzle size did you use for the primer? Greetings WoW

@GarageNoise Год назад

1.5 for high build primer

@joeberg9823 Год назад

Do you have the link for the sunmight 180 grit foam pads that leave a 600 grit scratch mentioned in the video? I do not see it in the description. Thanks for the videos!

@GarageNoise Год назад

I'll post it here in a minute

@GarageNoise Год назад

Here's the link I think this one leaves an 800 grit scratch amzn.to/43Zx3t4

@serviceproper Год назад

Thanks for the video! Question: that sprayer you’re using, is their only 70% alcohol or is it diluted? Also, do you have to use only 70% or can 91% be used too? Thank you again!

@GarageNoise Год назад

It's not diluted. 90% is fine. I just like 70% because of the lower flash point

@MegaMajormax Год назад

How long did you wait before sanding the primer surfacer?

@GarageNoise Год назад

I let my primer sit overnight

@Po7ent 11 месяцев назад

I sprayed base and clear over primer I forgot to feather out primer edges now I see the primer any advice sand it all back down?

@GarageNoise 11 месяцев назад

You will need to sand clear and apply base and clear again. You don need to remove what you've done unless there's some other issue. You can sand with 600 or 800 apply base and clear and you're good.

@Po7ent 11 месяцев назад

@@GarageNoise thank you 🙏

@joanwilliams3221 Год назад

You use a metal spreader when applying the bondo do they work better than the plastic ones ?

@GarageNoise Год назад

I use both don't really have a preference. They both have their place.

@redbaron2448 Год назад

Quick question I thought you can't/ shouldn't put bondo/putty on top of primer? What's your thoughts

@GarageNoise Год назад

Body filler or bondo is a little different than glaze . You can put body filler over prime but it's not the best practice and should be avoided if possible. Glaze on the other hand is ok. Still I try to avoid doing that as well. Appreciate the comment and support!

@redbaron2448 Год назад

@@GarageNoise ok great to know thanks, great video

@GarageNoise Год назад

@@redbaron2448 👍

@pedroherrera5371 Год назад

Hahaha yes and it scared the fire out of me

@GarageNoise Год назад

🤔

@pedroherrera5371 Год назад

The air hose coming off the da

@GarageNoise Год назад

@@pedroherrera5371 haha yeah I forgot I left that in the video.

@lucasellyson6872 Год назад

What did you use to reduce the primer ?

@GarageNoise Год назад

It calls for urethane reducer. 4:1:1

@drummer_zay9493 Год назад

You should mock up the bumper and headlight before even applying primer make sure that body line is tits.

@GarageNoise Год назад

I did, just edited it out.

@drummer_zay9493 Год назад

@@GarageNoise yessir! Good job man. Where r you from?

@GarageNoise Год назад

@@drummer_zay9493 Oklahoma! How bout you?

@Go69 Год назад

I recently tried the USC Icing and was not impressed. Truthfully, the Upoll "fine" body filler, that has been thinned using paint reducer, goes on SMOOTHER, sands EASIER, and is just overall less work, and faster to achieve a flat surface... I was kind of let down after using the Icing..

15:17

Blending clear when spot painting your car. #howto #autopaint #autobody

Просмотров 138 тыс.