$70 on Amazon. A much better value at $70 vs $90. I own one of these radios, no it’s not a high end radio but have no complaints. It’s solid. Almost bought a Noble because of how happy I was with the GT5 but got sick of waiting for Banggood to get them in stock. Good review.
Jim Himes are you using it with a 4wd or 2wd? Reason I’m asking is because I want a good remote with the good Gyro but that will generally perform well with 4 WD and sometimes there’s issues.
I see someone already corrected you about the low voltage alarm. You might want to throw up an edit to state in the vid it does have this feature. Great review regardless. Thanks!
Great video. I just got the gt5, since everyone compares both, it is disappointing, I bought both the Radiolink and the Flysky with my own money and only good thing about the Gt5 is looks and ergonomics, for everything else: radiolink; better usability and navigation through the system, more intuitive, wide range of compatible lipos, far more functions IF you need them, they dont get in the way, insane range, customizable buttons, trigger tension adjustments, all their receivers are rated for up to 10V and send telemetry back to the radio (lipo voltage, rx voltage and rssi signal strength) without any hassle for the user… To put it simply (and Im a HUGE fan of flysky and own 4 of their radios) the Gt5 feels like it is from the 20th century compared to the Rc6gs v2…
Thanks , I was looking at this transmitter as well . Still deserves a 1 on available info tho . I was really annoyed by finding zero info on the flysky page.
It does have low voltage alarm (4.4v for AA and 7.2v for lipo), it not only sound an alarm, but also vibrate! which scared me the first time as i wasnt expecting it.
Another point you mentioned is the price of the receivers, it worth noting that the FS-A3 receiver is a non-gyro 3ch receiver that cost less than 8$ shipped, and work with this transmitter.
Just getting back into RC drifting & going to grab one of these 👌 watched a few of your vids now so cheers 👍 P.s I'm upgrading from an ancient HPI TF-1 😀
Upgraded my udr with this radio and receiver. What an upgrade. Gonna get receivers for my other cars. But kinda want to hold out for Noble NB4 SVC receivers
Hey man, great review. But I like it more when u rate it 1 to 10, where 5 is average, 6 and 7 for above average and 8 to 10 is good to best. Anyway, I'm hoping u could make a review on the latest flysky fs-nb4 noble. It is said that they design it to match the performance of sanwa m12s. So they creat a new protocol for it.
They have a low voltage alarm for both AAs and 2 cell lipo but you can't set when the alarm goes off if your using a lipo it starts beeping at 7v I can't remember what voltage it starts beeping when the AAs get low but it does let you know their getting low as well.
Hi, I have a flysky gt5 but I didn't understand how to set the trim. There are two parameters trim subtrim and trim, first of all I don't figure out the difference between them. I noticed that when I set for example subtrim the display shows st and L ( left) but I can't find the right channel... If I rotate the navigation button it goes to the aux parameter and in aux you can set L (left) then R (I think right) and U (I don't know what it is) same problem in the trim parameter.. I thought of finding the L and R settings and setting them in the classic way. .. Could someone give me some explanation? If I have to mount a new servo before fitted the horn, how I have to set trim and sub trim? Thank you!
I use the fs-gt5 with a 10 channel drone receiver afhds 2a in my speed run car and trail truck. I also use it's standard reciever for a slash 4x4 with simulated hydraulics. All on one remote Easily half mile range on drone receiver A little less for standard reviever but clearly as far as I can see the rc effectively. Drone receiver Probably better but that's the limit of visibility from me to the car.
Hi the I purchased this Gt5 , I am new to the hobby, the thing is I have no idea to calibrate this GT5 to my rc crawler, it would be great I you had a video to show a basic calibration for a crowler, thanks
Hi, my FS GT% is loosing connection all time and showing a message asking if i want to reset the configs. Do you have any idea of what could have been causing this problem? Thank you for your review.
Hi Sir, quick question for you. What can you use channel 5 & 6 for? Can the be used to power bumper lights or/and light bar? That is what is stopping to buy this radio. Thank You !!
I just got this transmitter from Amazon for $70 and really like how I can use it for all the rc cars I have . I specifically bought it to use on a Gmade R1 built and can’t figure out why I have NO brakes , will roll on any hill unlike all my other RC’s. Would it be my build or a setting on the transmitter/ receiver ?? Hope you or anyone can help
I just bought it yesterday but when i try throttle trigger it didnt work properly. It goes backwards when i pull and it goes forward when it should be brake/backwards. Maybe u can help. How do i fix it?
Hey razor please give your feedback , I have the rival mt10. What would you upgrade first the receiver or tires? I'm thinking of running the belted hp 2.8 trenchers and this for a receiver . What would show the bigger difference ya think ?
Old vid but question. Can you bind 2 of these to the same receivers at the same time? Reason is I want to replace all my rtr remotes with one but have a second so my wife can drive whichever vehicle I'm not running
@@RazorRC thanks for the quick response to an old vid. I'm still gonna go ahead with my plan and just rebind on the rare occasion she or someone else drives one of the other cars
@@ValFPV There are a ton of receivers that will work. Just make sure you don't get the AFHDS model. It has to be the AFHDS 2A. I just bought a couple from Banggood for $10 each. If you want gyro stability control it will require the more expensive receivers.
