Flywoo Explorer LR DJI FPV sample cinematic cruising light acro freestyle

Подписаться 868

Просмотров 2,7 тыс.

50% 1

Flying out to a little lighthouse with the Flywoo Explorer LR DJI FPV 4 inch sub 250g micro long range quadcopter. Raw footage from DJI Caddx Vista 700mw 50 mbps DJI FPV goggles dvr recording. Also discussion of the 5.8ghz Goku analog vtx manual setup for the Flywoo Explorer LR bnf analog version with runcam nano2 camera.
Consider subscribing for more fpv drone flights, gear reviews, tips, and problems to avoid.

Развлечения

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@HomeDronen 4 года назад

Like what you've mentioned, its a good idea to run a check over your quad before takeoff... Great video! 🤩

@DrMacca 4 года назад

Beautiful shots - that's some smooth-ass flying! 👍

@SteadiRed 4 года назад

great shots! nice job! 😁

@6pdar6 4 года назад

E600 is for electronics that don't get high tempernature expusser(specially developed for mobile screens and it will start to losse grip very quick once it warms up just use hot glue like every other fpv pilot

@LookingForEntertainment112 4 года назад

Some hot glue would probably have been ok too. Good thing you saw it before you plugged it in and fried your vtx! I'm still waiting for a new back arm after I had a failsafe (was impatient and testing with a Flysky FLI14+) and crashed mine.

@gmivisualsjason3729 4 года назад

Hot glue can often melt again once the vtx is powered up and then begin to run off the connector.

@LookingForEntertainment112 4 года назад

@@gmivisualsjason3729 Yeah, it's definitely a risk for sure. Especially with a 450mw transmitter

@pmfpv8517 4 года назад

My analog Explorer LR that just arrived a few days ago came with IRC Tramp smart audio set up via softserial (might b using the LED pinout). Seem to work well coz that VTX button is a pain to use!

@ricardoferreira2811 4 года назад

I'm still sticking with analogue+gopro, when fighting wind DJI gets a crooked horizon line.

@gmivisualsjason3729 4 года назад

I suppose an f7 would of bumped the price up. Yes the buttons can be annoying but once set I can't imagine it will need changing to often for lone fliers. Why do you think the analogue will be your true long range quad and not your digital?

@m2kfpv449 4 года назад

The lighter AUW of the analog model and the ability to easily change vtx, rx, and camera allow me to get a reliable setup for long range. DJI model is phenomenal for out the box joy on 4S lipo but I’m getting well short of 1 mile vtx range on 700mw DJI Caddx Vista 50mbps.

@gmivisualsjason3729 4 года назад

@@m2kfpv449 that's really surprising if you've got upgraded antennas on the DJI .... With the stock antennas I got around 600m before bitrate and signal bars dropped of. With 4x foxxer 3 antennas I've done 1.8km. (only reason I turned round was that I ran out of land.)

@thisisspartan5953 4 года назад

Nice video.... 😊I am about to buy mine but I need some😳 help..... I'm using Fatshark 😎goggles and Taranis qx7. With one should I order the "Frsky R9MM receiver" or the "Frsky XM receiver"?🤔😏🙄?.... thank you......👍

@m2kfpv449 4 года назад

Frsky XM+ receiver. Your Taranis QX7 has a built-in 2.4ghz Frsky TX chipset you can bind with D8 and D16 protocol RXs including the FrSky XM+ and RSXR receivers. FrSky R9MM is a 900mhz RX which requires a separate optional R9M module that inserts in the back JR port bay of your FrSky QX7 radio remote.

@thisisspartan5953 4 года назад

@@m2kfpv449 I can just order the FrSky XM..... but if I want "more range", I should order the FrSky R9MM and the R9M module? At this moment I use the JP4IN1 Jumper Multiprotocol Module for my Spektrum airplanes..... """Can I use this JP4IN1 for the R9MM??"" Thank you.

@m2kfpv449 4 года назад

Yes you can buy R9M TX module for Jumper T12, T16, T18, etc. and use with R9MM-OTA RX, but the Flywoo comes with the R9MM-OTA RX flashed with FrSky ACCESS R9MM-OTA firmware which is not compatible with your Jumper TX radio which is only compatible with FrSky ACCST R9 RX and TX firmwares. FrSky ACCESS firmware is exclusively compatible with FrSky ACCESS equipped radios released near 2019. Summary, you will need to re-flash most R9MM and R9MM-OTA RXs to bind with an R9M module + Jumper radio.

@thisisspartan5953 4 года назад

@@m2kfpv449 ... You are the Best... thank you... 😁👍

@gilgsn 4 года назад

Hi. Can it accommodate a 19mm-wide camera or 14mm only? Thanks.

@m2kfpv449 4 года назад

Yes. Flywoo makes an Explorer LR 4K version with the Caddx Tarsier cam which is 19mm x 20mm. The Explorer LR version with Runcam nano2 cam uses clear plastic adapter to fit.

@gilgsn 4 года назад

@@m2kfpv449 thank you!