FORD 351 CLEVELAND 2V INTAKE AND CARBY OPTIONS AND TECH TIPS 

Great vid Oz, these info videos you do are really helpful.

@ 2:17 Wow! I am just now shopping for the intake gaskets for the Edelbrock aluminum intake, so I was watching your video to see how to install it. I have the original Ford cast iron 2V intake sitting on a shelf and it still has the metal valley pan (aka: Turkey Pan) stored with it. So I I figured I would buy a new metal valley pan and install it instead of just the paper gaskets. Thanks for the tip, saved me from damaging the aluminum intake. Thanks!

Hey guys awesome advice. I'm going through your older videos in preparation for having an engine built for my XD in the next 6 to 12 months time. I won't be building it myself - not mechanically minded unfortunately. But after taking note of the great info in your comparos I'll at least have a wish list of components and techniques that should be incorporated into it. Thanks heaps for imparting all this wonderful knowledge.

Thank you for your time and knowledge.

Just watched this again Brisbane Brother’s great info good on You Two love My old Clevo’s cheers Mick.

Great video dude! My favorite topic is "Cleveland" engines, and specifically their heads. I'd probably go for the "Weiand" intake, I've used pretty much the exact same one, and same brand on my 302. Also I use fairly large camshafts, I like one in the 292 degrees duration. You know what I'm talking about, anyways thanks dude, you know what you are talking about.

So awesome, brother. I am from bc Canada, and we brought home a 71 Mustang mach 1 351C C6 car. It has 4V small dot closed chamber heads. This car is going to be for the street, but I want to keep it 95% original, just a few day 2 things like new intake headers, carb , wheels, and tires. Love the information.

Wicked video bro 👌

VERY,VERY INTERESTING.YOU REALLY DO KNOW YOUR STUFF.

Best Cleveland videos!!

Great videos mate.

I’ve got two sets of D0ZAE Boss 302 cylinder heads in perfect shape and a set of D1AE 351-C closed chamber heads that are also in perfect shape. I’m running the Chris Parker funnel web intake with the tongues on my 351-C, roller cam. I have gone a best of 9.20’s on a 200 shot and still had some left in the motor. I just didn’t want to push it and tear up my motor. 34 degrees of timing on motor and 29 degrees on a 200 shot! My next motor is a 6” long rod, 3.5” stroke 351-C with AFD 3V cylinder heads with the funnel web intake and aftermarket block.

Awesome guys👍👍

Awesome informative video bro I’m from NZ and I’m a late starter in the v8 world haha I’ve just bought a 72 ZF Fairlane which has a 351 c 2v so I’m trying to learn everything I can about them. Hopefully I can find a service manual for the ZF and the 351 so I can learn and work on the car with my young fella I wanted a falcon but they are now way out of my price range Great video bro

Great video!

Wow you just answered my Question! Im running a 393ci clevo in an XW sedan with 750 dp street hp holley. I have the standard 4.V heads and want to swap out the standard square bore 4.V manifold and I might just put on the weiand. Cheers. P.S. she has 420hp and looking for around 450+

look forward to the NASCAR block video

I reckon the RPM Air Gap is the ducks nuts for a 2v street clevo - will allow more rpm without sacrificing bottom end. Performer still an awesome intake for stock to mild tho

Good video thanks

Hey mate good show. Like the content. I am running a 2v performer with a 2inch hvh 4 hole spacer and drop base k and n 14 by 3 inch filter. All fits under the bonnet of my xc ute with about 15mm clearance. Last summer the centre section of the spacer got hot and distorted resulting in the secondaries not opening. I took it off and die ground out the centre still leaving some of the ears between the holes. This resulted in way better throttle response off idle as the primarys can distribute better to the rear cylinders. Was thinking of swapping to a Torque Power hi rise dual. It should fit under the bonnet with no spacer or if I fit a thinner 2.25 inch filter should be able to run a half inch spacer. The ute runs an x stream filter top and gt shop engine mounts that I think are 10mm lower than stock. Have you had much to do with the torque power manifold? Also given that I have had a spacer fail already is ply wood one worth a try? Don't know what material the hvh is,some type of grey plastic. Has a drag use only stencil on it.

I appreciate and thank you for sharing your knowledge. I have a 1973 351 with 4v heads with a cast iron intake. I also have a preformer LB 351-2v. Is that intake worth putting my motor or should buy a 4v intake instead? What is the best intake for my motor? Thank you

Great video clevo king, you got another video with intake options but for cleavland with 4v heads?

I ran the turkey tray under my edlebrock performer for ten years without any issues, even in the NT where the average temp was over 35 every day of the year. Have you ever fooled with EFI on a clevo?

The Weiand that I got needed a shitload of work so I sent it back. I have used the Holley street dominator for a while. Very good fit but no longer available. Gone to CHI heads and intake. A lot better and expensive! Race engine. Though I know of street engines with them and the work surprisingly very well The filter top filter will work fine with a 2" element. That 4" element will not fit under a Falcon bonnet, even with a Performer which is an excellent piece for street use. Though for street use the standard Ford airfilter, works fine. A cold air pipe to behind the headlight helps a lot. Quiet and discreet

We need to see a skid vid with the xd ute.

👌🏽

A question concerning Cleveland crankshafts. Was there much difference between the 2 & 4 barrel stock cranks in the early years? I've recently purchased a 4 boltain block 72 casting and a set of 4 barrel doae closed chamber heads. I've got a complete 2 barrel engine and felt I could use the rotating assembly plus the externals to put together a 4 barrel engine.

Hey you would love my Clevo combo , a pavtek gold pro crane f 246 cam , Parker racing prepped as cast pro comp 4v's and a Parker racing funnel web manifold and a 750 hp carbie. Ice ignition system , 22 Dec Initial and 34 total depending on ambient temp Cruises great at 100km at 2500 rpm , I get 350 to a tank of fuel .it all fits under a shaker in a XY Gt rep . Happy if you want to have a look some time for your channel I'm a few hours west of Brissie. Pm me if you want to?

love the vid mate, but that shade cloth is whack on camera

I got some exhaust port plates for 4v years ago but can’t remember when (80’s I think), any thoughts on those? Cheers mate

After many hours of dyno and street work we found the best manifold is the standard 2 barrel manifold. The best air cleaner is the factory air cleaner complete with the heat pipe to the exhaust. We have 30,000 hours of engine dyno work devoted to engines and what they need regards temperature and fuel distribution. The cleveland needs the stock air cleaner for the purpose of setting up proper air turbulence at the butterfly.

Clevo King, just ran into your channel today. Can you recommend the absolute best heads for a 393 Cleveland. I live in California. Trickflow heads/ CHI heads. It’s going to be a street engine.

North America does not have many race type manifold single planes available. I guess the Ed. Torker, or the Holley Strip Dominator are about it for 4V. Never see Funnel Web's or these other brands.

1:25 my intake manifold is similar to that one with the small air cleaner, but it says on it 2v 351 LB performer, is that a good 1???

What would you recommend for a 4v closed head 393 Cleveland running a Paxton with ten pounds of boost?

I got one of those I did not know the importance

I installed a cleveland 2v in my 89 Bronco. It has the dual plane intake with a 650 Edelbrock. My problem is it bogs under a load (power braking) and dies. I'm wondering if it's starving for fuel. It runs great and even runs great when giving it full throttle in park

Will the Weiland setup fit under the hood of a 73 mustang with the ram air hood?

Hay mate do you have parts that you would sell?

🤤🤤

I’d say that triangular edelbrock air cleaner came off a chev😅😅😅😂😂😂😂😂

what's your take on the air gap rpm manifold vs the performer 2v?

do you have a business website or address or something? i have a cammed 302 Clevo i want to put into an F100 overland build & you seem to like Clevelands about as much as me!

Do you the the Weiland would fit under a ‘73 mustang with Mach 1 hood?

What are your thoughts on the chi 3v set-ups?

The Edelbrock Performer 2v sucks ass. Its only good for weight savings. I had a Holley 3310 750 on it on my street Cleveland and replaced it with Weiand Excellerator 2v on same engine with a Speed Demon 650 DP and woke the engine up. Great street intake/carb combo. People worry about the idle to 2000 rpm but there's no reason to. Honestly, unless you are at the stop light, how often are you at 1500-2000 rpm? You will get the same fuel milage from a DP and a vacuum secondary carb - it all depends on how heavy your foot is.

Do you still recommend the Edelbrock Performer intake with a 750cmf vac secondary carb on a 302C 2V? Or is this only for the 351C 2V?

Too bad they don't make intake manifolds for a "tall deck 351c" 351m. I think a 351m is an amazing engine. Very underrated.

The days of getting in front of a camera and recommending items and parts without comparisons facts and figures are long gone. Make a good used car salesman