Thanks for the video. Helped me a bunch today. Quick tip-I put zip ties around those two bolts under the flange head and cinched em down real good. Just in case they fall they wont go too far. It also helps hold em up a bit.
thanks to this video and the one that you are teaching and how to use the scan gauge tool I was able to fix my truck thanks again tech Ron I wish you still a live so I can thank you rip one of the best technical on diesel we going to miss you
Nice job Ron!! I see we both have love for the m12 ratchet. By far the best tool purchase to date and I have a tool box as big as yours. We must think a like cuz I cut down a wrench for the ipr as well. My 6.0 experience is on E-450 buses so its nice to see what the truck guys are doing. Thanks and keep em coming.
A trick I use in these situations is to lay a piece of cloth down underneath what I'm taking bolts or nuts out of in case I drop one. The cloth will catch it. I also have a telescopic magnet that has saved the day many times.
Ok Ron have the motor apart changing the oil cooler and took the valve covers off, and HPOP off air tested everything. I only hear a slight air noise in the HPOP. Nothing from the oil rails at all. Here is what I've done so far, new stand pipes, dummy plugs new oil rail on passanger side, ,new injector orings and seals, new nipple cup orings on drivers side. The only place i hear slight air leak is at the pump itself. 2006 f250
just as good as rusty!!! and you can use a piece of duck tape, or any tape that as good, over top of the bolts if your paranoid, just make sure the cover is CLEAN so the tape sticks when u get the cover close to the right spot and its not rotated anymore just push down and use the bolt to push the tape off.
What year is this truck?? I have a 05 Ford f350 6.0 and having the no start when hot issue...I was going to do the standpipe and dummy plugs and ipr valve...now I'm confused 😐
Thanks for the video. Its the first thing to maybe lead me in the right direction. I have fuel pouring down the back of my 6.0. Man is clean and no leaks from the fuel filter area, its not running down the valley, but I can only see until the turbo. what could be leaking this much fuel at the back of the motor? mostly passenger side but coming from both sides. Thanks
Hey Ron, I cant tell you how much I have learned from your well done videos, THANK YOU. One thing that is still unclear to me: is there a way to determine, or at least determine the odds of the pump itself being bad vs the STC fitting once I have it out? When I block both input and output holes on the pump from my '05 6.0, with the IPR firmly installed, and spin the drive gear, it turns with a lot of initial stiction, and then I really don't feel any suction or pressure at either port. Is this normal? How do you decide to replace a pump vs an STC fitting? Thanks.
You should give instructions verbally. If we have to visually watch the hands on part. its kind of hard to read the instructions at the same time. I really enjoy your videos over most other videos. Hope you can take this under consideration. Thanks
I have 2006 F/350 SUPERDUTY 6.0 During normal driving conditions the clutch fan tends to wind up without a/c. Eventually it heats up and once has done this, I can pull over and turn the truck off and immediately start the engine and it has returned to normal operating temperature but the fan is still engaged.
Help! I have an 05 F450 with 6.0 PS. I have owned this truck for 5 years, love it. In the summer when temps rise outside, the truck runs fine. But when you shut it off, it wont start unless you let it cool down. Not the engine, the breaker/fuse box that is in the engine compartment. It's on the driver's side close to the firewall. All the truck will do is flash "check gauges" until you wait about 10-20 minutes. Then fires up and runs fine. No problem during cool to moderate days. What in the world is causing this? I have asked several techs, they say they never heard of such a thing. What is that box called and why is it doing this?
like your vids.you know what would be nice? To know roughly what you charge for a job like this parts included. That way if and when we need to take it somewhere we got some cost idea so we dont get screwed. Anyway thanks Art
Hello Ron. I just recently replaced my stc fitting and after attempting to crank and purge air, I cannot build more than 280psi on my icp. I attempted a pressure test and i can only hear air bubbling out from the oil fill tube on the passenger side valve cover. Were should i proceed from here?
Thanks Ron. The only place their was a leak was in the orifice right by the gear on the HPOP. I found zero leaks in the branch tube. I made a special fitting out of an old STC to test without the pump installed. Its just strange that the pump only seems to fail when hot. I figured it would fail all of the time? Thoughts?
Hi there is a problem in my wheel in the type of Ford American diesel system f350 model 2005 problem Hh revolves engine and does not work only rotation I am from Iraq Please help me and thank you very much
Tips for anybody that dropped a bolt. ( I dropped one..) If you don't have one of these already, go to Amazon and get it. www.amazon.com/gp/product/B01A0HKTG2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 it will reach the bottom of the oil pan and the bottom of the block behind the rear block cover directly below the pump gear, where I found a ball bearing (from an old pump) that had been there for years. I dropped a bolt down past the cam and ended up finding it after removing the oil pan.
hey there I have a 2003 6.0 and I have replaced the hpop 3 times so far as of 216k miles. I have recently been encountering issues with it wanting to start hot. it starts cold fine but when it does start its really aggressive and it starts like I have my foot on the gas for a quick second . so I went and unplugged the icp and it starts like a normal 6.0 should but I still have the same problem hot do you think its a faulty icp?
NOW !!...If Anyone Needs Justification as to WHY THE HELL !!! DAMMIT !!! IS THE BILL FOR THIS UPWARDS OF $4,000 DOLLARS AT THE FORD DEALER ! And 90% OF THAT IS LABOR !.... This Video is for You. .....AND !!! if you think your gonna help your buddy out or do it yourself in the driveway ...LoL ! .... Remember 1 thing !!! DONT !!!! DROP !!! ...ANYTHING !!! DOWN IN THERE !! LoL ! ...or You will WISH ! You had just taken that $4,000 Dollar Bill from the Ford Dealership ! ...TWICE OVER AND WITH A THANK YOU VERY MUCH ! AT THE END.
I have seen this on my truck I took my truck to get the oil cooler done and they put after market oil cooler and gasket it lasted 2 months I had to get back in there and changed the gasket. Always use motorcraf parts!!!
Hey, love your videos, helped me narrow down my 6.0 hot no start to probably the hpop/plugs. Now just have to get it done. If I did an EGR delete and didn't get a SCT to turn off the CEL would I have any other adverse effects or just the light? Where are you out of, I'm curious because of the palms behind you in one of your videos?
Ron my 05 6.0 stopped running in my drive i started it up with silcone spray and the icp never went over 40 .when i checked the top fuel filter while the key was on filling there ere bubbles coming through is this a possible fuel pump issue or tear it to the pump??