Galaxy S5 Charging Port Replacement How To Change 

I was quoted $80 for this job at a repair store when the part was just $3.00....thank you for posting the links I hope you are the seller I'll absolutely buy products from you on eBay as a trusted source.

just did this swap out following ur vid...very helpful. Thank u. Just a word of caution to those trying this...@6:07-6:12 prying on the upper rt side working down...there are soft brass tab/contacts that get flattened from behind the circuit board. Upon putting my s5 back together the first time the port worked but the screen didnt turn on. In he 2nd try, i noticed those brass tabs were too flat and werent making contact. I went around the perimeter and gently pryed them out a bit (4 or 5 tabs). Worked like a charm :)

Best video I have seen for taking apart a S5. I followed directions but I spent more time taking out the amoled display just to be on the safe side. I used a heat gun while using a infrared thermometer to keep temperature around 140 degrees F spread evenly on the glass for most of the time..

Fantastic tutorial. Thank you. Step by step worked great. I just replaced my wife's charging port and all is working great. Thank you for taking the time to make sure a great resource.

Worked great. Took 45 minutes. Had the new circuit but forgot to get the screen adhesive tape. Toughest part was getting the phone body out of the chrome frame. Ugh. Screen came up easily when heated.

I'm glad i watched this because now i know there is no way i can do it myself. 📱 repair shop here i come!

This was really helpful!!! I got my s5 without a charger port cover, so know that's what I need to replace. It's charging again now, thanks to your suggestions.Got the charger cover kit on the way. Thanks again

I must thank you for this fantastically made instruction video. Thanks to you I was able to change this part for my mom's phone, which she really appreciated. So, thank you very much.

Smart Easy Repair- I have M#SGH-1537 Could you attach a link for the correct charging port. I just want to make sure i get the right port. Thanks,

Oh my goodness, thank you so much! I was terrified to do this myself but you made it really easy. Worked like a dream! We even have the same hairdryer! lol.

Ive never taken a phone apart before. But this video helped me fix my phone and now its working! thanks! (It seemed like you forgot to reinstall one of antenna cables at 10:10 , but I connected the dots there. Thanks again)

Hey i just replace my charging flex just like what you did and it turns great. However i did notice something new to my phone. First, when i charge my phone back button is not working but when remove the charger back button is working fine although you need to put more pressure to make it function not like before just a simple tap and back button is working. 2nd, when im going to a dial/call it is very delay to response to make a call. What do u think is the problem?

Thank you so much... my husband fixed it nicely following your video!

Good video. l got water inside my charging port (very annoying as the water proof cover wasn't plugged in at the time) and since then it's not worked. This video has helped make up my mind about doing the repair myself. I'm going to Change my camera whilst I'm at it as it seems to not be focusing as it should. Thankyou

Great guide, worked perfectly for me.

Thank you so much!!! you help me to fix my problem thanks again!!!!!!!!

Before you go through all this trouble try blowing the port out with compressed air after spraying a shot of QD electronic cleaner. Use a tiny flathead screwdriver to gently and carefully move thin cotton fabric or paper shop towel over the contacts, or use a clean toothbrush. I did all of the above and my old charging port works again.

FANTASTIC compared to all the others!

I did this and it took over 4 hours. Trying to get started getting the LED screen off is extremely difficult! You need tweezers, scalpel to cut adhesive and lift the edge up to get a spacer in, spacers (paper or plastic like picks or playing cards), tiny screwdriver, light, and magnifying glasses if you are older. Everything went ok because I was being very careful and going very slowly. The antenna wires are really hard to get to snap back on. I had to use more pressure than I wanted and I thought I was going to ruin them. My G900V had 2 TWO wires, not one as the video shows. Once I got everything back together, my phone would not power up at all....no vibration when I powered it on. Nothing. I took everything back apart. Checked all connections to make sure they were still plugged in correctly and put it together just enough to get the battery in so I could push the power button, nothing. Then I noticed what one poster below mentioned. BRASS TABS!!! When you are shoving things inside to release the screen, you are also crushing down all these CONTACT TABS that are on the control board that must touch the contact plates on the inside of white front cover. Look at the location of those plates and find the brass tab for it and pry those up so they are a bit more than 45 degrees up..don't break them. There are many of them. After I did that, it powered up and worked!

A heads up, the adhesive on the back of the screen covers *a lot* of area, especially at the bottom. the video mentions it, but i underestimated it and cracked the display.

Thanks. This saved me a lot of money

I got the message that the charger or cord was not the original and that the one I was using was incompatible with my phone. Sometimes it would charge for a couple of minutes then it stops and I get this message. I've been charging with different cords and different chargers for years and never had a problem. I looked for apps to diagnose and/or fix it to no avail. The phone is getting old so I'm sure techs have more interesting things to do. All the info is old now. I also got the port sharing message saying I should get the app for it. It wasn't available at Samsung. The app I found was on Playstore and showed one page that doesn't move until you attach the phone to another device. I finally just sent for a new charge port and installed it. I haven't had a problem since. It was not an easy job. If you're not good at fixing electronic gadgets don't attempt it. Getting the glass off the front without breaking it was kind of hair raising. I've had cords go bad on me in the past. It's frustration when they work if you bend them one way and not the other. If you keep getting these messages, don't kid yourself it's a bad charging port. I had another phone like this with a port that had a metal piece work loose inside the port. When I plugged it in, it shorted the wires. I wedged it back into position with a needle using a microscope. It didn't do lasting damage. The computer that I had it plugged into kinda went berserk for a minute. It shut down the usb port temporarily.

Sorry, I'll pay the professionals to do it. Good video though for the patients n the braves, I'm an impatient coward lol

REALY GOOD VIDEO...I HOPE I CAN DUPLICATE THAT..THANKYOU

Accually the first place you stuck the pic to pry up is Right were the ribbon cable is try to avoid this as it can cut into them

Great video! I've got the phone together and the charge port works great. the only problem is that the touch screen doesn't work now. Any idea what I've broken? the screen looks great. it just doesn't respond to touch.

It looks like a great demonstration vid. But I don't think I can complete this fix by myself.... The only suction cup I have is a toilet plunger and I don't play the guitar!

You kick ass! Thanks!

Where do get the adhesive for the screen ?

Excellent video but convinced me that it is too difficult for me.

Who new smacking my power button would make my dead phone come alive. THANKS !!

.... now I have to tell my dad I broke my charger port for the 3rd time... I can't do this!!...... I'm gunna die XP

Samsung Galaxy S5 G900M USB Charging Port same replacement part as Samsung Galaxy S5 G900I ?

do you think that it works on Galaxy Alpha too ?

what adhesive should I use to paste the LCD?

Can anybody successfully change it even if they have no knowledge other than youtube videos?

Where can I get some more adhesives or what can I use?

where can i buy charging port for my galaxy s5 g900w8

My volume buttons stopped working can you help me with that?

have a Samsung Galaxy S5 Model G900W, and I haven't been able to find a replacement charging port anywhere Does anyone know where I could find one? or if any other models would be compatible?

How much would you charge me to send you my phone to repair if I supply the parts?

Did you end up breaking the screen? I'm planning to fix my charging port, but everywhere i look people complain about breaking their screen while trying to fix it, even though they were "careful".

my charger port melting but the phone still working. cant replace it because the plastic part was melted to usb port 😢😢

wats is it called that link

funny it turns up just fine when I use my samsung earphones!!!!! so i guess I should use my phone earphones for volume control...smh

I try n i crac' my phone scream

I checked all over; and there doesn't seem to be any charging port specifically made for the 900w. the only way to do it now might be too open the phone first, then order the part

How much it cost the charging piece

mE aFtEr dOinG aLl tHis rEaLiziNg i fOrgoT thE pAsSwoRd fRoM a yeAr agO

It’s an amoled screen not lcd

gonna do this but so scared...lol

what happens if i don't replace the adhesive?

'

where is the proof that it turns on

@Leeaddersman2031 Samuel?