Godox TT685ii TTL Speedlite Complete Walkthrough

Подписаться 18 тыс.

Просмотров 50 тыс.

50% 1

strobepro.com/collections/god...
Video Contents:
00:00 - Intro
01:07 - Unboxing and Overview
04:22 - TT685ii vs V860iii
06:13 - Choosing and loading AA batteries
07:09 - Mounting on a camera
08:29 - Modifier Options
10:04 - Operations Walkthrough Start
10:52 - TTL and Exposure Compensation
11:47 - TCM function
12:23 - Sync modes
14:12 - Flash Exposure Bracketing (FEB)
15:36 - Zoom settings
17:53 - Lock button
18:24 - A note of minor importance
18:46 - Manual Mode
20:24 - Optical triggering modes (S1/S2)
21:05 - Multi Mode
24:01 - Tx Mode (radio commander controls)
30:33 - Rx Mode (off-camera flash controls)
31:33 - Pairing a controller/Initial setup tips
34:50 - RST function (factory reset)
35:17 - Custom Functions
41:26 - Conclusion
A HOST OF UPGRADES
Godox's newest iteration of its popular TT685 speedlite catches up to the rest of the lineup with the new menu design, quick-lock hot-shoe mechanism, and improved tilt-angles.
THE STROBEPRO DIFFERENCE
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, in-house 2-year warranty, and Calgary-based service centre.
AA-POWERED
While the TT685ii will not recycle as quickly as its lithium-powered cousins, some still appreciate the AA standard for the ease of finding replacement batteries. The TT685ii comes in at a lower price-point than the V860iii flashes.
X-SERIES WIRELESS
The built-in 2.4GHz radio receiver offers full power control and triggering without the need for an attached receiver. Just a single radio transmitter is all you’ll need to have full control over all your V860iiN flash units. Use your flash on-camera, off-camera, or as a radio master!
IMPROVED MENUS
The menu system has received an overhaul to be quicker and more intuitive. Particularly improved is the radio master interface, allowing you to easily control other Godox flashes and strobes from the TT685ii's rear display.
QUICK-RELEASE LOCK
A minor complaint with the first-generation TT685 was the somewhat fiddly wheel-lock for its hot-shoe. The TT685ii has a simplified button and lever style lock that will speed things up for you.
TTL
TTL mode allows your camera to automatically set the power and zoom of the flash.
HSS
High Speed Sync allows you to shoot shutter speeds up to 1/8000s. Perfect for freezing action and giving you full control of the ambient light, even in the bright midday sun.
200MM ZOOM
The huge 20-200mm zoom range allows the flash to push light as far or wide as you'd reasonably want to. Flip out the wide-angle diffuser, and your 20mm zoom will spread to 14mm.
EXPANDED TILT ANGLES
The TT685ii brings added flexibility to the tilt and swivel mechanisms. Swivel from 0 to 330 degrees horizontally, and tilt from -7 to 120 degrees vertically.

Наука

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@CHoudijk 2 дня назад

Thank you very much! I just bought this as my first speedlight. You give a really clear explenation of it's functions and workings. Helps me understanding it really quick :)

@__Mr.White__ Год назад

Many thanks. That MULTI picture at 21:48 was very helpful.

@tlillie-images Год назад

Thank you. I love the vibrant colors.

@enzogattullo1298 Год назад

Thanks Jesse you were much clearer than an instruction manual

@stratampeg4874 Год назад

Great GREAT Videos, thanks a lot for that amazing work and the time you spent to realize it. Best video for GODOX System !! Thanks

@hellosatan1 7 месяцев назад

i bless you a few times a year when i forget a setting and have to look up this video.

@hellosatan1 5 месяцев назад

here iam again

@ClassicBodybuildingArchives 11 месяцев назад

Your method of teaching, and your thorough instruction are golden! Thank you so much for uploading. It is much appreciated. You’ve just gained a new subscriber, Peace, Sal 💪🏻📸

@Strobepro 10 месяцев назад

Thanks so much for subscribing!

@mickeypower 8 месяцев назад

Thanks for that. Invaluable, especially since manual is incomprehensible.

@shxxter_mo Год назад

Thank you for this!

@aDimzzify 9 месяцев назад

Thank you! This is very helpful 😊

@pest86 Год назад

Very useful. Thank you!

@murtazaametwala8130 Год назад

Great Video, very helpful. Thank you!

@Daniele-video 2 месяца назад

Great review.

@timrosenthal46 Год назад

Thank you that was very helpful.

@moot6794 Год назад

VERY helpful. Thank you!

@veloz7860 20 дней назад

THE BEST. THANK-YOU. The manual SUCKS. This answered so many questions I had!!

@KhairulHakim007 Год назад

this help me a lot as an amateur photog.... still a lot to learn.. thx!

@tandikto 9 месяцев назад

Very helpful video!

@peteblackwell3 Год назад

Superb video. Thank you.

@yervantparnagian5999 9 месяцев назад

Great video. I actually just purchased this flash. Pretty much a bargain price for the performance.

@Ozplanman1 10 месяцев назад

Superb video, well done.

@Strobepro 10 месяцев назад

Many thanks!

@hongkongkong7174 День назад

thank you for the excellent explanation

@stuartross1081 Месяц назад

Thankyou for your clear and logical explanation. I have moved to this flash from an older Yongnuo. An aspect which confused me (and made me think it wasn't working) is that when the optical trigger is set there is no red flashing reminder from that red lamp plastic front panel. At least one other photo blogger I have seen said they couldn't get it to work and I suspect that they were also waiting to a see red blink at the front. I can confirm that it works perfectly on the Godox. Back in the day Nikon had a clever camera based flash control system (CLS I think) all optically controlled by the small built in flash with groups and channels, say Nikon D700. I still get the Yonguo to play along, where Godox is just a preset flash strength. Godox has more power and radio isn't defeated by bright sunshine outside.

@rgarciap7 9 месяцев назад

Thank you.

@Subhash3271 6 месяцев назад

Great information 👍

@bobby07241 3 месяца назад

what a great video thanks

@elianalarossa6506 4 месяца назад

Best channel🎉

@AmericanDreamsRestoration Год назад

Great video.

@Strobepro Год назад

Thank you! :D

@TZGPhoto Год назад

Bro, your video and teaching are very enlightening! One function that I haven't been able to perform yet is the Godox TT685ii as a "SLAVE" of a speedlight from another brand (Younguo, for example) in the "master" function. What is the best way to do this pairing?

@bennyach Год назад

Many thanks. salam

@MAP07070 Год назад

Thanks for this walkthrough. Why is there a distance scale provided in the led window? I don't think it was ever activated and I don't think you ever mentioned how it is used. My Nikon SB-24 has a distance scale and shows you optimal distance from your subject when triggering the flash. Does the Godox tt685ii use the distance scale in the same way?

@Strobepro Год назад

Yes, the distance scale is similar to what is found in other flashes. In TTL mode, you will see a range of distances indicating the minimum and maximum distances where a good exposure can be obtained at your flash zoom and camera settings. If you are closer than the distance indicated, the flash will not drop low enough to avoid overexposure. If you are further, then the flash does not have sufficient power for an ideal exposure at that range.

@alisonbrady6015 7 месяцев назад

How do you change it from radio to IR? (flash lighting bolt in top left hand corner) or does this flash not work in any other mode?

@mjla562 Год назад

Thanks for the video. Can that flash use to Fujifilm XT200 ?

@Strobepro Год назад

You may not have access to all features of the flash. Godox includes a compatibility chart in their manual, but does not list the XT200. Based on our past experience with unlisted cameras, you should have no trouble using the flash in TTL or manual modes, but HSS and rear curtain sync may not be supported.

@kritinaknief8565 Месяц назад

Haven’t finished watching but yay!! Thank you! Finally a clear demo easy to understand. I can’t get the flash to fire tho-not the test button and not when releasing shutter…any idea why?

@Strobepro Месяц назад

Hi @kritinaknief8565, Glad you're finding our video helpful! Unfortunately, when a flash does not fire via the test button, that suggests some kind of hardware issue. If you purchased the flash recently, you might want to bring this to the retailer's attention. If you purchased it from us, definitely get in touch. We offer a 2-year in-house warranty with every flash we sell.

@kritinaknief8565 Месяц назад

@@Strobepro thank you, but I finally found out what’s wrong-not easy to find out since, 1) it makes no sense, and 2) it’s not addressed in manuals or troubleshooting forums. If the camera silent mode is on, the flash won’t fire! Totally not intuitive design!

@Strobepro Месяц назад

@@kritinaknief8565 Oh, I might have misunderstood you! I thought it was not firing at all, even when you pressed the test button on the flash. The silent mode on some cameras will disable hotshoe triggering from the camera side, but this should have no effect on the test button. If your camera's silent mode disables the flash, it might be because the silent mode enables your electronic shutter. On most cameras, you can only use your flashes in mechanical shutter mode, so that's another thing to watch out for. I agree-it's not exactly intuitive. It would be nice if the camera gave a little warning whenever the flash was disabled.

@linkedinfred 11 месяцев назад

Getting my T685 to talk with my Godox trigger is like precision landing on Mars. Technically possible but with enormous learning challenges and with great risk of failure. I have achieved it. Once.

@Strobepro 10 месяцев назад

Sorry to hear you're having an issue. Put the flash in RX mode, set the channel and group. Then on the controller set the channel and group. Should take less than 1 minute and the settings will be saved when you turn it off as well. Give us a call if you need some help.

@linkedinfred 10 месяцев назад

@@Strobepro Thank you very much for your advice. I will do what you have suggested. I think initially I was a bit impatient with it, so I recently sat down and spent some time with it. Thanks again.

@hanneshuch8965 6 месяцев назад

Exactly! I'm a professional photographer for over 20 years, but making these two pieces work together is beyond frustration or as you say a "precision landing on Mars" (love it!). Thanks for the video nevertheless!

@wjonz321 Год назад

Great video! I have this for a Sony A6500. I can't figure out why I have a constant red light instead of green. Any idea?

@wasingsing1567 Год назад

Hi, for me I think if red light is when the flash is in slave mode? or wireless mode, based on my observation.. If you can see when in the red light, there's "CH" channel indicated so I think it is for wireless or when you're using a flash trigger

@kansaitraveler Год назад

On the flash itself can you change the power increments by thirds or can you only do that with an external transmitter?

@Strobepro Год назад

Currently, it appears the flash itself is only adjustable in 1/10 increments. 1/3 stops would probably be more useful for most users. We will suggest adding the ability to adjust in 1/3 stops in a firmware update.

@filipatanasov368 Год назад

Does this Speedlite have Autofocus assist? Do you think is good for general use?

@grannystyle7965 11 месяцев назад

Hi, new to photography. Is there any point to buying a godox trigger/controller + the TT86ii opposed to two TT685ii since the TT685ii has built in trigger?

@Strobepro 10 месяцев назад

I'm not sure what model you are referring to with the TT86II. Most people prefer the controller rather than doing it from the flash menu. The only time I would recommend this is if you plan to have the flash on the camera hot shoe all the time.

@JensenChua2118 11 месяцев назад

Hi there, thanks for your awesome video. Would appreciate if you could help me, I got the TT685II C recentky, but noticed I can't trigger the AF beam assist in low light condition. I set to the AF to on, but i still don't see any beam when i pressed on my 5DMKIV ,,, i using back-focus button for the AF , the shutter button on exposure trigger. Any advise would be helpful. Thank you so much.

@Strobepro 10 месяцев назад

Can you try it with shutter release instead of backbutton? Also make sure you're in a dark room for testing.

@angelhernandezramirez4753 Год назад

The Sony version come with the metal hot shoe?

@attila1899 Год назад

Hi i have a 685II for Sony but i cant see in the menü secound curtain option In ttl? Is that a problem with something? What you think

@Strobepro Год назад

Hi Attila, There are small differences in the TT685 depending on the camera brand it was intended for. On a Sony body, you would control the 1st/2nd curtain sync options through the camera only.

@tranthanhbinh4883 Год назад

Bro! How can i use off flash without trigger on 70D?

@hungrychad Год назад

Got the Sony version and it doesn't have FEB :(

@dronzalo 24 дня назад

Same

@paulatasca3249 2 месяца назад

Is there a reason why my flash doesn't specifically say "ETTL" but "TTL" when connected to the camera via hot shoe? Is there a diferrence in the way it's operating, or should I select a specific feature? It does fire and based on the settings, but it just doesn't put thr E in front otlf TTL. Thank you

@Strobepro Месяц назад

Great question! "E-TTL" is just Canon's proprietary TTL technology. We show the Canon version of the flash in this video. Nikon will display "iTTL." All other models will just display "TTL."

@iggiboigaming6367 Год назад

Hi, I have a Godox tt685ii as well. But in V1.0. I can see that you are in V1.2. May I know where did you find the firmware? Cause, I cannot see it in Godox Website and also what Launcher did you use to update it is G1, G2 or G3? Please help. Thanks a lot!

@Strobepro 11 месяцев назад

Hi Iggi, The exact latest version available to your model will depend on the brand compatibility of your flash. For example, the V1C (Canon) is currently on version 1.9 and the V1N (Nikon) is on version 1.6. If your flash is on 1.0, it's safe to say it's a bit out of date. We organized Godox's firmware packages into a list that's easy to navigate, and is organized by update utility (G1, G2, or G3): strobepro.com/pages/firmware-upgrade In your case, you would need the G3 update utility.

@sbudamor 9 месяцев назад

Hi, i am a beginner. I want to knownif this specific external flash will work with Cannon 250D. Thanks

@Strobepro 9 месяцев назад

Hi @sbudamor, Yes, it is compatible! It's definitely wise to ask since the 250D lacks a centre pin on its hotshoe, but all current Godox flashes on their latest firmware will work with the 250D.

@sbudamor 9 месяцев назад

Thanks you so much

@jburdick1969 2 месяца назад

what external Battery pack should I use ?

@Strobepro 2 месяца назад

Godox has a product called the VB960 that is compatible. If you want to run something else, it is a Canon type cable that you will need regardless of your TT685ii's brand compatibility.

@TechwithAaron-rq5me 26 дней назад

please how do you know the battery level

@Strobepro 23 дня назад

AA batteries of different types offer variable capacity and performance, so AA battery indicators aren't particularly accurate. There is no indicator on these flashes, but the performance of the flash will tell you when it is time to switch batteries. You will notice your recycle times getting longer as the batteries drain.

@manolopascualesplugues875 3 месяца назад

lastima que no me pueda enterar por no estar en español

@jukeboxjohnnie Год назад

wish theyd kept the Master and Slave designation, puts me off buying it

@zeroclipstudiocom Год назад

I hev nikon version, but in I-TTL mode show me only tcm option, not hss. I have set it on camera but dont see the option on flash unit. Why?

@Strobepro Год назад

There are small differences between individual models depending on camera type. With a Nikon camera, you just need to select your fastest Auto-FP setting in the camera's flash menu (E: Flash and Bracketing). With that configured, your flash will automatically switch to HSS when you exceed your flash sync speed.