I am really looking forward to mine! Also looking forward to being able to run this directly off of 6S flight packs rather than having to use lower cell packs and the BEC cable. The crew around here is also looking forward to my old SB VRX being available to get into the system once it gets back from repair in china. Thanks for the vid and doing your part to help this system get out there man!
The interference I get as well with my original vrx with cair 13db patches like the ones you have on the new vrx. The added sensitivity is the culprit. As many see from my videos it won't actually be an issue, but in high multipathing it may also show up. But overall your range in those environments are still improved and having the higher gain 100% reduced the hot flashes 🙌🙌🙌
hey Ryan, I just built the tiny trainer with elrs and Hdzero. I used the plug on uart 3 of the f405 board for my elrs and it is working. I used the HD video plug (minus the s-bus ) to power my the Whoop HD board that came with my tiny trainer V2. The board is powering up fine but I am not seeing any video. I have a brand new original 5.1rx and the Whoop board. When I connect my drone to betaflight and a battery betaflight is also not seeing my TX. How do I get my TX to show in Beta flight? i have my TX on uart4. I have the uart 4 slide bar set to MSP. Can you think of any step I am missing?
I am still undecided. I do city diving at 5:30AM before workers and buses enter. My video needs to penetrate thick three leaves. The steady view analog never troubles me with blocking/rainbow artifacts. And I know the more digital is involved, the more unpredictable things can happen.
Thanks Ryan... Goggle aesthetics...No one ever claimed that FPV goggles were chick magnets...🖖🏼 The fans sound didn't seem too obtrusive..would likely be overcome by ambient noise I think..thanks for the ride
I just went to through 2 vrx v2 modules they just stopped powering up and ordered a 3rd one what's going on with these modules I was using 3s lipo batteries
It’s so sorry to see the sharkbyte was discontinued,as it has so much better design. And I’m look for a used sharkbyte vrx after waiting several month of this new vrx.Finally,thanks for your frankness,keep going!
The part where there is less breakup going around the trees in front of your house. That's at about 7:30 (-135 degrees) to the angle you're facing. So that would have been all Omni antennae, not the patches at all. I'm of course assuming that you didn't move your head, as that would have basically invalidated the test anyway, as the SharkByte VRx was static on the plant pot. Interesting though.
I'm afraid I'm going to have to to send my 1w vtx back as I cannot get my hands on a vrx and I'm not rushing to support a new technology when it needs my support but I can't give it
@@NeoFlowFPV How do you know if they're out of stock on pre-order when stocks aren't even in yet? HobbyRC in the UK is still taking pre-orders for example...
@@NeoFlowFPV They have never been in stock anywhere...just available for pre-order. As I imagine those being first come first served you should consider getting in earlier rather than later imho...if you're interested enough that is..regardless.....good luck 🖖🏼
Can you configure EVERYTHING you need to in HDzero using the VRX4 if you have no goggles at all? I don't want goggles, I don't want to buy goggles, I want tho throw all the analog and DJI goggles I have away, and I just want to slap a VRX4 on the back of my big screen TV and go. #endthegogglepwwke. I don't know why you guys insist on flying with these absolutely awful goggles glued onto your face :-/ Put it on a TV. A big TV. A small TV. A portable TV. Anything but this grrbage you have to strap on your face.
yes, you should be able to still use the jog-wheel as normal... just get a mini hdmi to standard hdmi adapter. Plug the mini end into the vrx and run that cable to the adapter. Run a standard hdmi cable from the adapter to your television hdmi input and your problem should be solved.