He is Alive! / Starting my First Build on my Birthday / Episode 34 

Another simple way to check if your float needle is working is to drain the fuel out . Hold your carb upside down and blow into the fuel line . You should not be able to blow air through if the needles are working properly. We use to do this with are dirt bike carbs all the time when we were kids .

You can see how happy he is he fixed the carb for you. I love seeing kindness in people. Give that man an award! Well done ❤

Beautiful Honda 750.

What a great looking flag.

🎂Happy birthday🎂can tell you had an awesome day 💫

Bench set the carb, those flaps all adjusted before integration open and close with a snap.

If I remember correctly, you installed the needles with the clips in the top groove (leanest position). Try starting with them in the middle position.

My guess is that you need to raise those needles up at least one clip position. They were in the full lean position with the stock airbox and stock exhaust. Jonesy needs more fuel for that extra air. At least you got to hear him run on your birthday :)

Hi,happy late birthday ..very glad to hear engine sound finally.)

What a great video, it was rewarding to see the level of complicity between you and Simon when trying to get jonesy's heart beating. You two have a real on screen platonic chemistry. If Phil and Holly get the sack over queuegate ITV could do a lot worse than think about the both of you as replacements. Also 22.08 has to be the finest Nookie Bear impression I've ever seen.

Happy birthday Beautiful

Aw mate I'm so chuffed to see and hear that!! Everybody mucking in during your birthday bash to get Jonesy fired up was awesome to see... Special day for such a cool bird who thoroughly deserves it. Nearly there Deimantė 😎👍🥇🙌🏴󠁧󠁢󠁳󠁣󠁴󠁿

Those carbs are almost as pretty as You! ...Almost👍😁

Its all about the bonding and the journey!!! Nothing more rewarding and no better way to fall in love with your bike than nursing it back to life with your own hands 👏♥! Jonesy will love you back even more for it! Cant wait to see him on the road.

Your first build is inspiring and has motivated me to get off my butt and tackle the 83 BMW R100 I have had in pieces spread around my garage for the last 20 years. 🇨🇦

Happy birthday too^^ (sorry I'm late...) What a sond!! It's so noisy I LOOOVE it 🥰😎👍

What a great surprise to get a early Thursday evening video,,, and how frustrating was that .....,,,that brought back memories of the excite same problem from the 70s with my CB 750 ,,but all will be wonderful in the end with Jonesy Bikers or not

I was in the middle of writing a comment to check the brass overflow tubes for cracks... then we found out that was the problem. ( I guess Ive learned some stuff watching motorcycle maintenance and repair videos.)

Brilliant video thank u ❤👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

The MAGIC of carbs! My dad has the original Fireblade which will come my way one day, and I slightly dread having to look after the carbs!

Nearly there girl, 👍🏼👍🏼 fantastic job 👍🏼

Beautiful.

Bike sounds incredible

These carbs look like the same type as my CBX 1000 bike I once had. Such was my infrequent use of the beast, that when started up it would spill fuel profusely due to sticking float business. What a pain taking them off, apart and back on again.

Great Job,very nice Look 👌🏻👊🏻

Happy late birthday and Jonsey looks so good. Your so close to accomplishing your build and it looks splendid, good job!!

Fab video n hoping you had an amazing Birthday 🎂 🥳 😍😍

Ha ha ha ha, that's exactly what I would do. But being old and single, I can wash my petrol rags anywhere I like.

Gotta say Jonesy is a really good build(just like its owner).

Happy birthday 🎈🎂

Happy Birthday to you =)

OMG 🎉the first sounds. 💪

That carb guy man what a legend 👏 🤘🤘

Almost.

Hi nice Video cool and nice day and good trip 😉 👍 💯 🏍 😉

Oh my god 😂-still laughing. Pesky # 2 & 4 and love the names you gave them. You all work so well together. Such a joy to watch you especially now after this horrible hurricane here in FL. Thank you!!!

Well what a change. Mixture didn't sound right and the carbs will need vacuum balancing so that the slides all open together. And lordy first time we've seen you in a dress . Kinda thought you were born wearing jeans😊😊 Best of luck with the next part.

🥳🥳🥳🥳

Belated Happy Birthday. Jonesy sounds mean when running.

You are teasing us! Get this bad boy snarling and roaring!!

the fun prt is balancing the buggers hee hee

Glad to see it was those pesky tubes, it was only going to be 1 of 3 things causing overflow issues, Sounds to me like the jets are too big, did you take note of the jet sizes that is in there? I think if you come down 2 sizes on the main jets it will probably sort him 👍

I'm ridiculously excited to hear Jonesy going.

Like yourself it's looking well

🤘😘🤘

Do enjoy your videos though x

Cool vid as always,your bike is alive!

It was a Happy Birthday for you. Cannot wait till the small glitches are eliminated. Was Jonsey firing on all four cylinders unlike before on less than four? Take care Deimante,stay safe 'n dry too ... plus looking fine in the new shop apparel!

Happy birthday 🎉 (a bit late, I know 😅) Carbs seems to be a bit fiddly to work on, I would never have the patience to do that! But Jonsey is just the first in a long row of projects, I hope? Can’t wait to see him finished!

Svarbu balsą parodė :)

My tube was cracked too and I took it apart and put it back 3 times before I realised!

🇦🇷👍

That is absolutely , the best kind of fun , what a great birthday for you , I wish I could be there to meet Simon , the crew , share a coffee , a pint , or a biscuit , I said . . . B U I S C U I t .

Yay! Congratulations. How do you feel?

had three of them k2 k6 and an f1

Great content....what song is playing from aroun 12:30-16:00ish? 🔥

Happy Birthday? What is your name? I just realized I have been watching your videos for a while and don't know, lol.

Buy a 2nd hand cb650 honda. Perfect bike in reasonable price.

Nice video 👍🏿 , carburetors looks so sexy )) и ты тоже такая красивая ммммм 😁

Lol, brilliant video, got me pmsl, watching that dude touch float heights, when the first thing to check is the float needle and the seat, to make sure its not blocked or has been worn. I wonder how he would fix my carb that leaks when it's on the sidestand but doesn't leak when I ride it 🤣🤣🤣

Thank you, you are hard working, will convert to Islam religion, hey i am not here to argue. We love you Russian.

Your build? 🤣 Don't break a nail please.......

Nice flag. Not.

👍👍👍💪💪💪