I have a 1080p dome camera and i use to be able to bring up the camera settings on screen by selecting the Iris button under ptz controls but all of a sudden it doesnt want to bring up anything. Do you perhaps know why this is and if there is anything i can do?
Great video i have been struggling with this and you have answered a lot of questions in this video and made things clear, i have a nvr with the colouru cameras i take it i can do the same as you have with my cameras and nvr ? Robin
Paul what is the software app used on your video. When I log into my dvr, it displays a HiLook app. Looks similar to yours, but things missing on mine. Have set up motion detect. Which records me when I enter the rectangle. But can't get any events to work. have ticked the buzzer, and the light associated with the camera, but the buzzer or light do not work. Can u help please.
Do i have to have accusense cameras to have this human detection system? Or just q3 nvr device would be just fine for it? I'm planning to get DS-7716NI-Q4. Does it have this feature?
Hi Paul, Thanks for the detailed explanation, i have issues with watching my dvr on my windows laptop, The ivms 4200 application keeps hanging and logging off though i have no issues on my android mobile remote viewing
Great stuff as always. Got a question. I have a DS-7204HUHI-K1/P box with three colorvue cameras on coax. When I set up ‘line cross’ I can only do it for 2 cameras and if I try to do it for the third one it says out of resource. I guess this is a limitation of the box? If so is there a way to update the box or is it a case of getting a better box? Thank you.
Hi Hugo, That's strange as the HUHI version usually lets you have 4 line crossing events. Only the HQHI is pegged back to 2. Double check that you've not got any 'Intrusion Detection Zones' set up. These would count against the four higher functions that are usually available on HUHI's. P.s I believe the last firmware update for this DVR was "Build 210705" and there are a few pieces of special firmware around for 3K and 4K compatibility. Hope this helps. Regards, Paul CCTV Systems UK @CCTVSystemsUK
@@CCTVSystemsUK - thank you so much for the reply. I really appreciate your time. I’ll have a look at the firmware number and see. It does make sense that you should be able to have four as it has four cameras. I don’t think I’ve got anything set up other than 2 line crosses and one camera just records. But I’ll check. Again - many thanks.
Why on my dvr (ids7204huhi k14s) can't I do motion and intrusion together? It says I have to disable motion dection before I can do intrusion or line crossing!
Hi Simon, The resources of the machine can not be stretched to be used for human or vehicle recognition on both motion and intrusion / line crossing. My advice would be to use the motion in its basic form "without human / vehicle." I say this for two very good reasons! 1, Intrusion and line crossing for humans / vehicles is far more accurate and adaptable than motion, eg, sensitivity and loitering time. 2, Both intrusion and line crossing can be used on the same camera simultaneously. where as motion for humans and vehicles can only be used on its own. It prohibits all other uses of this key piece of detection. So my way works better as you can have two layers of protection, instead of just one. Hope this helps, Regards, Paul CCTV Systems UK @CCTVSystemsUK
Bugs keep setting off my camera motion detection, to a point where I had to turn it off cause it was driving me crazy. What's the solution. Just when I didn't arm the cameras something happened!!!! Murphy
Good video. Only issue I have with it, is putting the recordings to motion only. Yes, it massively increases recording tome, but it CAN AND DOES miss certain motion events. Great vid overall though.
For this I changed it to continueous recording. Because I also needed it to record all the time because unless someone actually crossed the line it wouldn't record. So I've changed to record all the time. Bugs though make the sensors go off at nigjt
My security camera looks like a clock, im not sure how to set it up, the manufacturer is will not reply to my phone call emails either , i want to catch this bt stealing my property.Does it have be connected to the wifi if so it will show up on the listing of the wifi Thanks Please reply
I just purchased ids-7208huhi-m2/s and the build GUI is NVR not the HVR 4.0 you are using which seems easier to use. Can I change mind and how is best way? TIA sheldon
Hi, I'm sorry, but the firmware / GUI on this video was for the previous Acusense HVR. The (B) series. As you have an M2/S. This means it's the newer (C) series. The (C) series GUI is modelled very closely on the Hikvision NVR GUI. Hope this helps, Regards, Paul CCTV Systems UK
Hi, thanks for your effort. I was wondering if hikvision's acusense dvr's target classification VCA features will work with third party TVI/CVI/AHD cameras and non acusense hikvision IP cameras?
Hi, I can confirm that Hikvision Acusense DVR's do allow the higher functions to work with other coaxial type cameras. This is because the Acusense technology is built-in to the actual DVR itself, so does no need to be present in the camera. Unfortunately I have yet to see the higher functions work on any other IP camera but their own. This is because protocols are never the same between manufacturers and never will be, because big manufacturers never share their toys. Hope this helps, Paul CCTV Systems UK
@@CCTVSystemsUK Thank you for the reply, my second question was whether an accusense dvr will do the vca functions on a video stream from a hikvision ip camera added to it? or does the ip camera itself have to have the accusense feature?
This is a really good video, but it is not showing the same as your screen, could it be that we have a slightly different system, we are trying to set some instruction lines or zones, for our yard, what do you recommend please
Hi, Am I right in thinking it's the menu on this Hikvision DVR that is different to yours? What about this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YCqcM6Vogdk.html Sorry I know it's an old video but, is that what your menu looks like? The link is for line crossing but, is very similar to Intrusion. Regards, Paul CCTV Systems UK
hi, great video, i cant get the hard drive to record only when there is motion, its recording all the time ,i have turned down all sensitivity, and masked any trees or bushes, but the red recording sign is all the time, i have the same system as your video with 3 cameras, can you help
Hi. I have the same dvr. I have set it up watching your videos thank you. The only problem I’m having is; I hear this static background noise on mobile phone app which is very annoying. How can I get rid of it ?
Hi Mehmet. If the camera that you are watching does not have a built in microphone and there is a static type noise just follow these instructions: 1, right click and then left click on camera at the top of the screen 2, then left click on video parameters 3, On the left hand side you will see (Main Stream and Sub-Stream) tabs select the cameras that don't have a microphone built-in on both and change 'all' the stream types under Main Stream(Continuous) and Main Stream(Event) to video only and apply. This will stop the DVR sending 'ANY' audio at all. This will include that static noise. Also left click on 'storage' on the top of the secren and you will land on the 'Record' screen. Click the 'advanced' tab for any camera that again doesn't have a built-in microphone and un-tick 'Record audio' and apply. This will also stop the static sound on playback. Hope this helps, Regards, Paul CCTV Systems UK
Hi, Your DVR will probably have older software in it. The latest Hikvision DVR firmware will bring your menu into line with what you can see on my video. Hope this helps. Regards, Paul CCTV Systems UK
Hi, Simply click the cog to the right hand side of the device name on your mobile phone, then scroll to the bottom and press the 'delete device' lit up in red. This should allow you to unbind it from the DVR. Hope this helps, Regards, Paul CCTV Systems UK
@@CCTVSystemsUK i don't have the log in anymore,when I open my app Hik connect doesn't have password that's the reason also I can't access my DVR Mobile
Hi Vicki, Don't worry my dear. This is perfectly normal. The red light flashes as the HDD memory is under load Eg: 'while recording'. The white light will flicker less frequently but, for that very same reason. Because the DVR is 'writing' onto the HDD memory. Hope this helps put your mind at rest Vicki. Best regards, Paul CCTV Systems UK
@@vickistevens779 Hi Vicki, yes just about any mouse will work in these DVR's. We supply a lot of wireless mouse's from half a dozen different manufacturers when installing these units so that people can control their CCTV systems from the comfort of their seats and they all work fine 🙂 The only note of caution i would throw in is that, when we are called to DVR's that are 'playing up', usually because of a faulty HDD memory. We often see that the cursor for the mouse has either disappeared or, has become stuck in the position it was left the last time the system was used. Again this is usually a faulty HDD. Other than that you shouldn't have any problems my dear. Hope this info is of use to you. Best regards, Paul CCTV Systems UK
