HomeMade 212cc Engine CVT Clutch - Full Video 

I could be wrong, but just from the close up of you revving it with it off the atv, it really looks like the variator you got doesnt have hardly enough travel closing to actually make good use of the cvt. Most scooter variators have more than an inch of travel along the boss to close, yours looks to only go a fraction of that. Its a cool idea with how you did it, but i think if you used an actual scooter variator itd have way more range and ratios

if you loosen that belt a little bit, you'll notice a huge improvement in the gear ratio change. you have to leave those belts on those cvt's loose, it allows for the gear ratio change. it starts out where the engine pulley is small, & the back pulley is large. as the RPMs increase, the front pulley becomes big, and the back pulley becomes small. this is your gear ratio change, and you should be able to see the CVT belt changing as this happens. yours doesn't move, I think it's just too tight it stays in one spot. should notice a 10 to 20 mile an hour increase, and still have the takeoff torque. but yeah, you have to loosen that belt.

Very impressive and a genuis idea, keep safe, kay Ma discover ra lagi ka.

Wonderful job my friend! 👍👍👍

Very well! Cool idea! I really like it! I love these designs, especially home built ones! Big like! Definitely a Subscription!

Thank you, i used this innovation my projekt👍🏻

Parabéns pelo vídeo

e davvero un ottimo veicolo il prossimo video lo voglio vederlo al mcdrive

u know it will be a good video when theres chicken sounds in the background

man! you are a genius !!! i am thinking of doing something same with geared motorcycles. thanks for the idea..

really very creative friend, always successful, greetings from Indonesia

Cool idea I actually thought about doing this by cutting them back half of a scooter transmission off and mating it with a go-kart engine with a variator on the front, on a side note them shocks look way too stiff looks like it's a go-kart without shocks lol.

Mantap bang... cocok untuk go kart

Красава все доделаеш после испытания , молодец жирныи лаик

The engine they just cut in half is one of the best I cannot believe they did that that is one of the best two-stroke engines out there oh my God I still can't believe they did that why did you cut it it was such a good engine

Great job

This is awesome!

Thank you for creating such an informative and entertaining video on RU-vid. Your hard work and dedication to the topic really shines through and I appreciate the effort you put into it. Keep up the great content!

Now you got 9ut door drilling equipment cool

Good idea

Top demais amigo, parabéns pelo projeto inspirador.

hi you have a great idea it's very good wish you good health

Your work is good, well done. I congratulate you on this ingenious skill. I love you. I will support you with a like and a subscription to the channel, and I tell you to continue.

Nice build btw

Thanks I also did diy in my channel you are inspiring

Good my friends 👍 👍 👍

I think it will be more better if the sprocket has a same size. But nice work

The transmission gear weldings will stand by such forces?

Nice idea

I think it's not rev high rpm to full engage the clutch. But it works all that's matters. Great build.

I've been plotting this to install 212 predator on to Honda Spree problem Honda Spree Drive is in reverse would still have to cut up a gy6 motor to use that rear portion

Excellent build and machine !!!! :-)

Nice vedio 👍

Thsi is exactly what I want to do to my trailmaster 300 but use the chinese clutch and a 780r front clutch.

Wonderful 💐💐💐💐

Good job.

Good 👍

Супер!

fc ครับ

nice video

Давно сделал уже передачу по такому принципу, видео на канале есть, про трактор из хлама

Já deixei o like

I like it your video Good

what did you do with the piston and crankshaft

No lugar do pião dentado coloca-se a roda será que daria certo?

Good

Bravo

you need to loosen the suspension up or it needs softer shocks

mantap 👍👍👍

Hello, a question can you tell me the measurements of the band that the go kart uses please

Nice

Много раз такая мысль посещала, поженить GX-160 c вариатором.

I didn't see variable, only constant. So it's a CT transmission?

Mantap 🥰🤝

What kinds of bars did you use

i need the model of the engine side of the clutch to see if theres a 1inch bore for a 406cc engine

This is so cool. ...

Nyimak om 👍👍👍

Ok felicitari

4x4 จะดีมาก

bravo,tres bonne invention,c est possible de me dire ,c est quel embrayage pour l avant ,coté moteur ,merci

👍👍👍

tell me how you convert cvt to instal on crankshaft for this engine

Wow

good good✔️😘✔️😀😘

I was thinking that if you do a powder coated paint on all your builds they would look professional

has no rear suspension flex but it's cool

Totally AMAZING!!!!!!! 😱😱😱😱😱😱😱😱🤗🤗🤗🤗🤗😯😯😯😯💡💡💡💡💡💡💡

Looks bouncy, maybe letting some air out of tires would help

jos

กำลังเหลือๆ ✌️✌️✌️✌️💃💃💃💃

Nice job .what is the max speed ???

Funny thing is that the original scooter engine has almost the same hp as that 4stroke junk you used and is capable of much more

With volks wagon engine cool custumized

👍👍👍👍

Need change the shock in front

💯

he's the one with the strength hahahaha

CVT CONTINUE VARIABEL TRANSMISI

👍

Me gustaria ver si se puede alargar el cvt clutch de scooter para poner rines mas grandes como 15 o 17?

Manni wish i had the know how tondo this!!😢

can this be attached to the boat

Itu pengganti roler nya pakai apa om

Bos glindingane papat Piro lengkap sak pelek e

Can u send me link where u bought this variator?

В чём проблема взять родную втулка со шлицами и на неё расточить звёздочку? Сцепление и ремень долго не проживёт при таких нагрузках...

Hey you must have five channels tech channel and other channels cool

1 million dollars!

How much cost a compler kit ?

Nossa que gambiarra

класс ! супер!

Can for make traketor

I ike this but gasoline tank near weldine spark is dangerous.

Z čoho tam máte ten variátor (prevodovku)?

А реверс?

Might want to lower pressure in tires......

Amigo una pregunta) ¿el variador no se puede adaptar también directamente al motor?

What is the top speed?

Not gud choosing tramission but nice idea to using old scooter