Honda Civic, Brake System Flush, 8th generation DIY service flushing your brake fluid

Подписаться 27 тыс.

Просмотров 13 тыс.

50% 1

Flushing and bleeding Honda Civic brake system 8th Generation, easy one man do it yourself job, that saves hundreds in future repairs, step by step instructions.
Please help support my channel by using my Amazon Affiliate links:
Battery Acid Filler: amzn.to/3Ko4ihg
Turkey Baster: amzn.to/4c0suCf
drain Pan: amzn.to/4c0ndud
Ratchet 1/4" swivel: amzn.to/3vY0LSL
Mechanic Gloves: amzn.to/3OcULfu
Safety Glasses: amzn.to/3HvBYbx
One man brake bleeder kit: amzn.to/48SgzoV
Honda Brake fluid: amzn.to/480rbAK
Brake Cleaner: amzn.to/3SDfewo
Brake Bleeding Wrench: amzn.to/3w41jXh
ANPUDS 1/2-Inch Drive Torque Wrench: amzn.to/3THpwfW
ANPUDS 3/8-Inch Drive Click Torque Wrench: amzn.to/3tDkLcI
ANPUDS 1/4 - Inch Drive Click Torque Wrench: amzn.to/41F3mwX
#automobilerepair #brakefluid

Авто/Мото

Опубликовано:

25 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@F479999999999 17 часов назад

I’m so thankful you took the time to make this video.

@dannysdiygarage 13 часов назад

Thank you for stopping by and watching, appreciate your gratitude

@joatmonjoatmon8911 6 месяцев назад

One step not mentioned…Spray the inside of the brake nipples with brake cleaner then dry them out with compressed air before putting the rubber nipple caps back on.

@jeanariley7759 Год назад

Thanks Danny. I'm going to give it a try!

@dannysdiygarage Год назад

Easily accomplished, good luck and let us know how it turns out

@LekaBeogradOslo1970 3 месяца назад

Great Danny, will try soon to flash brake system. Thanks!!!

@benyamtesema4089 2 месяца назад

Good job, Thanks a lot

@dngalla Год назад

Made my own brake bleeder from a video I found on YT. It's so so. But the one you used seems way more convenient and it has the magnet to attach to the car. Thanks for sharing, you have good videos

@dannysdiygarage Год назад

Appreciate the comment👍🏼

@damwa Месяц назад

Thank you for your these videos

@dannysdiygarage Месяц назад

Appreciate your gratitude

@yanellzakaev5601 9 месяцев назад

Great video. Thank you

@dannysdiygarage 9 месяцев назад

Appreciate your comment, thanks

@Jibison 18 дней назад

Thank you for all your videos, it has helped me alot

@dannysdiygarage 12 дней назад

You're very welcome! Appreciate your support

@fredericktoo 7 месяцев назад

Great video!

@dannysdiygarage 7 месяцев назад

Appreciate you

@scottmagyar Год назад

Awesome video, I just did my brakes 3 months ago completely rebuilt brakes front and rear with new calipers on my 2007 EX Coupe . Flushed system with harbor freight brake pressure bleeder for 34.00 tht connects to brake bleeders and a compressor awesome tool, it took me 45 mins,fluid was black as coal, car from Miami Florida, thks for sharing,

@dannysdiygarage Год назад

Awesome story Scott, thank for sharing

@bobjones9727 Месяц назад

good video

@richardfabrizio8998 6 месяцев назад

Just subscribed. I like your style. Nice tutorial

@dannysdiygarage 6 месяцев назад

Welcome, I appreciate your support

@kriskafowlski4463 Год назад

Another awesome video Danny. Thanks. Although I did miss your great soft music you usually play. Ha ha

@dannysdiygarage Год назад

Appreciate you 👍🏼

@chadbaldwin652 11 месяцев назад

I love the turkey baster idea. I've always used a large syringe. But the plunger tends to degrade over time, so I have to keep buying them. The turkey baster seems like it would hold up longer, plus you can pretty much operate it with one hand, as opposed to the syringe which you kind of can use one handed, but it's not nearly as easy.

@dannysdiygarage 11 месяцев назад

Turkey basters are also cheep to purchase

@dannysdiygarage 3 месяца назад

No it doesn’t damage the master cylinder, yes, that is correct 8 time pushing the pedal is sufficient, the main thing is not to run out of brake fluid in the master cylinder as you’re flushing, once clean fluid comes out you can stop, it could only be 4 times

@l9857 Месяц назад

Great video. Instead of a turkey baster, I use a battery acid filler - you find these in battery accessory section of auto parts stores. Bulb has a bit more capacity.

@dannysdiygarage Месяц назад

appreciate your input, great recommendation, I added it to the description on what to buy to do the job

@troyhenry3267 6 месяцев назад

Danny i love the video. Thanks for making this. I saw another method where you can use a vacumm extractor tool to attach to the bleeder valve and pump the trigger to extract/suck out the brake fluid from the line into a container. Don't need to go into vehicle and pump pedal. Not sure which method I'll use at this time. Question: What product did you use to epoxy your garage floor? Did you DIY that ? or have company come in and do it for you? I'd be interested in you doing a video on how you did your floor if you did it yourself?Thankyou!

@dannysdiygarage 6 месяцев назад

Yes DIY job, I actually have two videos on the garage floor, here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yGPGz0iWN1k.htmlsi=rSRg_v1c3N9Sj8ah

@PanjalsDIY Год назад

Thanks for the video… can you please make video on how to diagnose hard steering wheel ?

@dannysdiygarage Год назад

I’ll put it on my list, I’d love to know more about your steering issue

@PanjalsDIY Год назад

@@dannysdiygarage thanks for the reply… I don’t have any issue with steering, I feel bit hardness while turning at slow speeds even I changed my steering fluid recently but no use I suspect that it is an issue with suspension bearings…

@dannysdiygarage Год назад

Thanks, that’s a great idea for a video, (Checking Suspension), appreciate the feedback

@zeeshankazi 3 месяца назад

Hi Danny, I have Honda Civic X 2018 model and i am planning to flush it's brake system for the first time. Do i need to push the brake pedal all the way down, wouldn't that damage master cylinder seals? Further, what i got from your video is that u pushed pedal 11, 8, 7, 8 times from farthest to nearest. Hope to hear from u soon. Thanks

@zeeshankazi Год назад

Hi Danny, Nice video...! Kindly help me out with following query; Before replacing front and read brake pads, callipers' pistons are pressed inwards and fluid level in reservoir comes to max level subject to there isn't any leak in system. Do we need to bleed air in that case? Thanks.

@dannysdiygarage Год назад

short answer is no, check out this video I did on replacing pads, around the 3 minute mark I explain this process about pushing your old fluid back into your reservoir, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rSS5KP_2mLY.html

@timt7657 6 месяцев назад

Great video thanks Dan. Is there any specific torque to tighten the bleeder screws? Also my son’s car has rear drum brakes. I assume the process is still the same but the different size wrench mentioned at the end? Thanks in advance!

@dannysdiygarage 6 месяцев назад

Yes process is the same, I’m sure there’s a specification, I didn’t use it, tighten it and check to make sure it doesn’t leak and you’re done

@timt7657 6 месяцев назад

@@dannysdiygarage thanks Dan have a great holiday ahead.

@dannysdiygarage 6 месяцев назад

@@timt7657 you also ❤️

@taqlatif Год назад

Hi,Thanks for the video. Im from Malaysia and i have a 2012 Honda Civic 2.0s (9th Gen). The honda brake fluid that i will be purhasing is 1Litre. Would i need more than a litre of fluid to do a proper flush on all four tyres? Hope to hear from you soon.

@dannysdiygarage Год назад

yes that should be enough

@taqlatif Год назад

@@dannysdiygarage Thank you. Appreciate it 👌

@vandiyplant921 Год назад

Hey Danny, The Honda service manual says bleed order is front left front right rear right rear left. Would you recommend following the Honda service manual in this case?

@dannysdiygarage Год назад

I would recommend following the owner manual recommended procedure, mine came out perfect, I should have read the service manual

@vandiyplant921 Год назад

@@dannysdiygarage I noticed Toyota Camry service manual specified the order you did here. Service Manual for civic and accord state the bleed order as clockwise starting with driver front and ending driver rear (when thinking of a top down view of vehicle)

@niconoypirynn 8 месяцев назад

Perfect and clear. Sped up the video 1.5x and it was perfect. Thank you very much.

@troyhenry3267 25 дней назад

Danny, would this procedure work the same for my wife Hyundai Santa Fe??

@dannysdiygarage 25 дней назад

Yes

@naitch1761 11 месяцев назад

With drums in the back is it the same process or you just do the front end? Thanks Danny

@dannysdiygarage 11 месяцев назад

Same procedure

@naitch1761 11 месяцев назад

@@dannysdiygarage ok thanks

@kevins5268 2 месяца назад

My caliper bleeders are snapped off thanks Midwest salt

@joshaden6533 Год назад

I'm all for using OEM parts and fluids but any name brand brake fluid will work just as well and be a lot cheaper. Honda doesn't make their own brake fluid.

@dannysdiygarage Год назад

Great information, thanks for adding