House Flippers Completely DESTROYED This House! (Part 2) 

Thank you to everyone leaving kind words on the video series! I’d be honored if you checked out our apparel line as well! workforitapparel.com

Those 2 guys are A+ employees. They are hard and competent workers. Really hard to find.

Subbed. 43 years as a builder here and it's refreshing to observe someone of your obvious caliber, expertise and integrity. Dude, you know your shit. It's about time someone holds these "flippers/peddlers" accountable for the crap they stick naive buyers with. This is one of the worst I've seen and I've seen a lot. Short term non owner occupant sellers should be a red flag for everyone and, furthermore, there should be bonding requirements in place for these peddlers of unsound and unpermitted improvements. If the buyers purchased using a real estate broker, perhaps they should consider suing them. I'm not an attorney but I think that just might be implied liability hopefully covered by the brokers' errors and omissions insurance. Keep up the good work and never stop learning.....but you've got that covered it seems.

The blocks with no mortar are just terrifying.

I think the biggest green flag here is how much you obviously appreciate and value your workers. Rather than having a completely one-sided relationship with them you have a good bilateral relationship and are reaping the benefits.

I worked on “That house up on the hill that looks like a hospital”. Owner was the founder of the Titan Corporation. 2500 square feet of the lower level is classified as a bomb shelter and has an elevator.

My respect to your guys who work for it every day. They're really great employees. Able is a machine! Jefe too!

Great prep work for the retaining wall! That compact clay soil evidently was the only thing keeping the property from having an indoor pool! 🙄 😂

You need to get your guys some masks for the saw cutting. Concrete dust and silicosis is no joke. Care and protect your workers.

I'm not sure about California but in Michigan it's code to not have any rerod sticking out or sticking into dirt that's tagged into concrete. Reason being, is the rerod rusts and creates a rust trail to all the rerod in the concrete.

These are the things I'm thankful for the consumer protection we have in Finland with houses. Even 10 years down the line if "invisible fault" is found, the seller (and the builder) are reaponsible for it. That type of work would've resulted in a situation where buyer gets their money (plus compensation etc) back, and the seller gets their lemon (plus the expenses from the court, usually from both sides). I feel sorry for those owners who'vw bought a home they liked and now need to fix someone elses mess.

Love a business owner who has a good worker relationship with his crew.

I wish I could find a contractor/ builder like you. You take pride in the work that needs to be done, keep up the good work.

Glad I watched part 2. I was interested in understanding your plans for the pour in place retaining wall footing. Now I understand better. Totally agree on cleaning up equipment. I've done alt of small jobs with a wheelbarrow. It really annoys me when workers leave concrete on tools. Wheelbarrows are hell when the last guy neglects rinsing off concrete and stucco. I have even painted my wheelbarrow with cold galvanize spray to stop rust between jobs. Concrete slides out nicely. When clean out is neglected it makes work harder. Same goes for metal screeds and finishing tools. BTW, you can clean up a finishing trowel or other tools with pool acid. Then sand working surface with 100 grit sandpaper to restore surface .

The wedge in the saw guard issue aside, looks like you guys do great conscientious work, and I am enjoying the video.

Why didn't you just take the broken concrete out to your ranch and fill in the "ravine" along side the road where it was washed out? You wouldn't have to pay to get rid of it that way. It would make a nice filler.

You could just tilt the dump bed to get it level 😂👌🏼 also, STILL MY FAVORITE RU-vid CHANNEL!! 🎉🎉🎉

That’s weird, don’t touch my truck! Lmfao

I’m sure you use your dump trailer more than we do but we mounted a solar trickle charger on top of the tool box on the trailer so that battery always has something charging it. Just thought it could help so you don’t gotta plug it in all the time

Always love to see you and papa Ryno showing your skills and the information on how you do things,why you do things and make it right!

My family lost the family home and it was bought by a flipper. He came to the door to tell us he had just bought the house and was willing to give us money upfront to move out now. We could not even rent a Uhaul for that money so we said no. The irony is the house was cracked right down the middle. The company that built the house never bothered to pull the rebar up into the foundation plus the house was cut into a hill so it was half fill of dirt and a bad foundation the crack was right along the fill line from the street to the back of the yard. He got stuck with the house and now rents it out because it is unsellable LOL

"Don't touch my truck"... Dude was spittin

love this content u been putting out man keep the grind on and being the best human being u can!!! your honesty and integrity to your customers thru buisness is not seen often anymore sadly but there are still a few out there that have there heart in the right place instead of scamming people like most these days

Your customers are going to be so happy when this is finished. With these videos they can actually see how much work goes into all the repairs you're making. 👍

Incredible skill. Loading a wheel barrel without making a disaster.

Dude I think its time to sell some of the other trucks and go ahead and get you a 2024 f450. New build and a perfect work truck.

Just found your channel. Love your vibe and info and presentation. I lived in SoCal 45 years ago and like seeing the crazy stuff that goes on. I’m a realtor here in Ohio for last 38 years.

Ryno out here giving the people what they crave and need! Thanks brotha

love watching people do this kinda stuff, absolutely WILL NOT do it myself. 12:44 Abel is clearly so happy to have a new toy.

Always so cool to see how other salvage yards do it. We have 5 full truck scales maybe use 3 of them. But we have 20 acres that have different dump spots plus a tow yard. Main shredder pile, a large pole building for non ferrous and then dump site for shingles and other random debris. Plus a crane with a magnet to get nails

Finally! some decent concrete work, I love it when Americans use concrete and use it properly - better than all of that plastic and wood-chip stuff. those guys in the video are probably charging a lot of money for their work, but damn! this level of craftsmanship is worth every damn penny you will pay them! taking care of every little detail from finding out the source of the problem, planning the solution, preparing everything in the correct steps and also using the right materials for the right job. Bravo! greetings from Germany

Really enjoyed part 1, it’s crazy the shortcuts people are willing to take.

Man I couldn’t thank you enough for you and your content, very educating and well spoken love your videos

Loving this job here, what a nightmare for the owners. Always get an inspection, they had to have found something if an inspector was there before they bought.

The people who own that house are going appreciate your hard work and making it right bro

Bro I get a warm feel every time i hear you speak Spanish. 😆 There are hispanic people out there that wont and cant speak a word of Spanish.

Really cool to see someone take pride in their work if you were local id definitely hire you guys

My father used to do construction back in the day… and we had a 1990 gmc 3500 with a custom hydraulic bed. Dumping trash from was so awesome… drive up to the landfill, back in, open the doors, get back in, hit the button and slowly drive away… done… people around us was a bit jealous

Keep up the great work. Really enjoy this type of content!

the newer/bigger dingos are great yes they do have different controls than the one you rented! i’ve lifted well over 1000 lbs with one. never let us down. i’ve driven the bobcat versions and i never felt quite right. keep it up ryno!

Hats off to you for taking this on…! Flippers in general suck shame on them. 💪

I bought a vermeer CTX 100 about 2 years ago at RDO/Vermeer in riverside. Ran me about 42ish for the machine and then 6grand for the hydraulic log grapple. I also got a small bucket attachment. It’s been one of my favorite investments I’ve ever made.

Wish I could work for someone like you. You seem to respect the work of the guys there with ya.

Abel is my hero! Just a cool little dude and hard worker.

just found your channel today in my recommended channels. I'm now 2 videos in, and you guys are awesome! :)

I'm less worried about keeping it nice and more about keeping it functioning properly.

Love these episodes. To be honest tho love all your content if it's the hunting blind to truck builds there all amazing thank you for the content ❤❤

Excellent work, really appreciate the detailed explanations of what you're doing and why. Props for such attention to detail and quality.

Love seeing another Titanium dalluge hammer. You and papa Ryano always do killer work. I’ve got 27 years in construction and I’m so fortunate that i get to build some cool icon things. 7 years at Disneyland, and now a superintendent running new jobs for 4 years up at LEGOLAND in Carlsbad. We have mutual friends, and stokes me out in how much pride you have. Keep up the great work brother. Next time tell Cameron to shovel it lol.

Love the time lapse of the marine layer rolling in.

Nice Dixxon!! I believe thats the tradesman flannel. Released November 2017. He was way small back then here in Tempe. Dixxon was 6 people. There was only 500 of those made, and never remade. If that is the Tradesman, you have been a fan for many years. I have over 100 Dixxons hanging and atleast half, that still new in bags. If it is not the tradesman, it is still old because it has square pockets, no pleat in the back, and maybe even a yellow tag on the back. Anyway, sorry to run on about a flannel. Love this channel, been here for more years than I can remember, I am a supporter of the channel, and have many work for it items. Keep up the great content, and lets see Dave a little more.

12:01 Ok, I heard, "I'm here at Home Depot to get some stakes" and I was thinking, "Really? Steaks at Home Depot? Dang, they've got all kinds of stuff there now!" ha ha

Always a good day when Ryan uploads a new video. 😁

Absolutely love when I stumble upon a great channel. Cheers!

Papa Ryno always getting shit done ! 👍

Vermeer is what u want I personally operate both them and the toro dingos and the stability and power is unmatched with the Vermeer Note: they also have your dual joystick controls you like

Can always get leveling blocks for the trailer. Makes a big difference when I’m loading and unloading trailers

I love how you told Abel the Saw has balls! 😂

Down here in Florida we call it dangles we mostly use it for irrigation or piping jobs and construction sites in landscape jobs And three jobs…

Great to see the work. Really enjoying it

What a great work crew.

My work has a couple of vermeers, my favorite one we have is the S925TX. Great machine for many uses. But as you mentioned mentioned Steep price.

Always making the blue collar guy look good! Keep up the good content, and true to what you believe! MLR

I feel like the upgrade could be a small dump truck!

Poppa Ryno needs to wear a workforit hat. His heads got to get burnt 😢😂😂

That weird thing, someone did same to my truck at jobsite, just random card for detailing, never contacted them and tossed it trash

Hey just subscribed. Love the work and your professional skills towards the job.

That dirt reminds me of Fresno, CA. Digging is back breaking. Super hard dirt.

Extra fancy La Jolla dirt!

Appreciate your videos man!

Looks like you got a good crew dudes seem pretty chilled👍

Keep up the awesome work Love the construction content

at the graveyard the dirt always sticks in the dump truck - they need to install a shaker/vibrator on them trailers

Abel just lookin at this man on the walk behind like "Get that hunk of junk out of here i can do it quicker." lol

Nice dixxon we need a dixxon & work for it collaboration just saying that would be 🔥🔥🔥🔥🔥🔥🔥🔥

They could've made a lower patio area instead of having the dirt against the building

My favorite type of content ! Let's go ryan 🤘

Loving the construction videos 👍👍

My biggest recommendation for you is to swap to Pintle hooks for your trailer. We do similar work on virgin soil and typically need a lot of play/movement in the trailer to traverse rough off road conditions. I feel like a similar setup on any bumper pull trailers you have in such hill conditions would give you a significant advantage. They also hold more weight and faster/easier to connect and disconnect from.

It’s coming together Great work

This proves how smart and knowledgeable contractors are! The flippers I’m sure, were trying to go a cheaper route to maximize their profits. Shameful that the home owners had to absorb the cost. 💲

Just subbed. You do great work holmes. Keep Rockin brothers!💯

A couple of things The 7.25 saw is sweet. I just picked one up not too long ago myself. The newer Toro units are pretty nice also seen a few at the Conexpo in Vegas this year

I used to build the jt20s at ditch witch and had my hand with some of the smaller walk behind skids and I promise you the quality of ditch witch is tier 1. They are now owned by TORO but Toro themselves kept the majority of the ditch witch machines in production because they were superior to what Toro had. I'd recommend ditch witch everyday the quality control we put machines threw before they were even qualified to ship to a dealer was very intense

Don’t touch my truck 😂

That toro seemed slow compared to the ones I’ve used. I have a ditch witch and it’s def worth checking out Ryan. I love it.

You could have raised the dump on the trailer to be a little more level.

Sounds like you might be upgrading to the new 2023 diamond c LPT series with the comment about the chain setup on the doors. Workforit

Oh hey Ryan battery on your dump trailer should trickle charge off your truck while your hauling. At least that’s how my 12’ Doolittle dump trailer works. And don’t worry we all drop the tarp rolling it up 😂

Hell yeah love the video!! Keep up the awesome work 👏 💪 👍

The bigger model of the Toro dingo’s are joystick controls. You can even get them with telescoping arms.

Hey Ryan what size drop hitch do you have for the f450? I need to get a longer one but one formula says 15 inch. Then another formula says 12 inch .

Well done..that dingo is not slow..just imagine using a shovel only..thats how we do in Ug.😅😅

How many times did you knock over the wheelbarrow dumping sticky dirt with the mini-x? I can just see it happening 😆. Great work, as always 👍👍!

Great job ya'll!

GearHead Tuning is ELITE.

If someone pulled on our sites with that f450 I think someone would throw a hammer at it lol. Put a flatbed on it. I’ve been running flatbeds since 2005 when I started my first excavation company at 17 and have tan nothing but flatbeds since.

Facts you can use it and keep it nice is so true get told i dont use my things cause they look good

That's the best place to dump and the prices are way better than edco and landfill. That spot is a little hidden GEM

Toro trx1000 best mini track skid there is least amount of down time I’ve seen out of all the other brands from 16 years in the rental industry.