How to Change the Chain and Sprockets on a GSXR | GSX-R 1000 | Partzilla.com

Подписаться 177 тыс.

Просмотров 79 тыс.

50% 1

Get your GSXR drive chain kit here: bit.ly/GSXR-drive-chain-kit
Get all of the GSXR chain and sprocket replacement parts OR the Suzuki 27000-40830 drive chain kit here: bit.ly/GSXR-chain-and-sprocket...
Learn how to change the chain and sprockets on a GSXR 1000 motorcycle. How do you know when to change the chain on your motorcycle? There are two big signs. First, the teeth on the rear sprocket will start to look like crashing waves, meaning they’re worn. Second, you’ll have run out of adjustment to keep the chain tight, meaning the chain has been stretched as far as it can go.
In this video, John shows you how to remove the old chain and then remove the old front and rear sprockets from the GSXR. Then we’ll replace the sprockets on our GSXR and get the rear tire mounted again. Next we’ll show you how to install a new chain on your motorcycle using a chain tool, and we’ll finish the job by adjusting the motorcycle chain and then lubing it.
Read how to do this job step-by-step: www.partzilla.com/blog/suzuki...
Why would you change your motorcycle sprocket? Read more here: www.partzilla.com/blog/why/re...
VIDEO HIGHLIGHTS:
Removing the old chain - 2:10
Removing the rear tire - 3:04
Replacing the front sprocket - 3:30
Replacing the rear sprocket - 4:20
Remounting the tire - 5:00
Installing the chain - 5:30
Adjusting the chain - 10:15
Lubing the chain - 12:40
Buy Suzuki motorcycle parts here: www.partzilla.com/parts/search...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2007 Suzuki GSX-R1000, but you may have similar steps for your Suzuki motorcycle. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Suzuki GSXR 1000 Brake Bleed:
• How to Bleed Brakes on...
Suzuki GSXR 1000 Won’t Start Troubleshooting
• GSXR 1000 Won’t Start ...

Авто/Мото

Опубликовано:

27 июн 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@sulisalam 4 года назад

I freakin love this guy! I wish he was my grandpa

@timrinker8233 2 года назад

How did you just roll that wheel into place and the axel lined right up with practically no effort?

@lynnbrown4687 5 лет назад

I've seen several of your how-to videos. You're an excellent instructor.

@PartzillaParts 5 лет назад

Thanks, Lynn! Been at it for 40+ years... Glad you're enjoying the videos

@chipbrown3009 5 лет назад

WOW! Great Video ... very professional and thorough! Thank you!

@MaseRC 4 года назад

Top class instruction - saved the video to my bike maintenance playlist for future use...thank you.

@prozeza 5 лет назад

Man, my goto for bike instructional vids. Thank you!

@user-pq3sb5kf2g Месяц назад

Best video on here for chain and sprockets

@sonsofliberty90 6 лет назад

One of the best videos you made! Very thorough! Congrats!

@PartzillaParts 6 лет назад

Thanks Antonio!

@ReagueOfRegends 2 года назад

You've saved me a lot of money working on my GSXR at home. Thanks guy.

@miguellopez20111 4 года назад

Awesome vid , I have recently started to ride ,this is very useful info , thanks

@pclouw 3 года назад

I love the fact your clinical and precise .. take your time.. measure after every few turns.. some of the other guys are abit caveman.. and just pull it tight or push it in.. nice job Sir really appreciate your teachings

@timjamesvella 3 года назад

Excellent tip to not tighten the adjuster lock nuts until after torquing the axle nut. That got me going round in circles for ages.

@blakeingram1958 4 года назад

I have learned alot with all of your videos and I really appreciate the time you take to explain step by step it saved me alot of money for the future and also for letting me learn something new thank you again

@Md.ShahparanShuvo 6 месяцев назад

@torks2339 5 лет назад

Fantastic. Exactly what was looking for for my new K7 purchase. Subscribed.

@MrKickflip74 5 лет назад

Just picked one myself 2 weeks ago. How you liking yours? Gsxr 1000 right?

@alejandrogrisales1166 6 лет назад

Ingeniero saludos desde colombia muchas gracias por sus videos...por favor si es posible subir mas videos mas seguido es un material exelente .... alejandro

@noncompliant209cali 3 года назад

Awesome video. I was quoted $250 to do chain and sprockets and tires. But after watching this I think I'll just take the tires in to change and balance them and do the rest myself. Thanks!

@robertgaggero982 4 года назад

Nice work excellent job you are very experienced at what you do👌

@quentinthomas6726 4 года назад

Excellent tutorial thank you

@danut05 6 лет назад

Great video, i love the precision work!

@PartzillaParts 6 лет назад

Thanks, Dan!

@vmrksa 3 года назад

Great video!!

@15Kilo 3 года назад

Everyone with a motorcycle should sub to this channel! Always excellent diy videos! Thanks guys! AND they always have all the torque specs etc!

@PartzillaParts 3 года назад

Thanks! We appreciate it! Glad we can help out!

@tonytoneton2pac966 3 года назад

Great video are those Specs for the 08 gsxr 1000 as well,front sprocket bolt,lock tight,and rear sprocket tourque

@LUCHINOGT 5 лет назад

Hi,your video help me very much,can you make a video for cluch and steer bearing change?!Thank from Italy...........

@herbertXX 3 года назад

Very good excelent explications

@888jannn 7 месяцев назад

Thanks nice job....

@Senior-Busa-Rider 2 года назад

Thank you 🦅🇺🇸🦅🏍

@lmunozjr 2 года назад

Nice impact!

@jarreau2001 4 года назад

This was a lot less painful than some of the other videos I've seen for this job. Thanks!

@oplex7687 4 года назад

Watching your video as we speak doing mine ! Wish I had an angle grinder I done went through 7 jig saw blades because I forgot 😂

@R1Ammar 3 года назад

Thanks for the great information. One question, the measurement for the rivet is that different from bike to bike or chain to chain? If so, where do we find that information?

@pwh1t3y 4 года назад

Great video! I have a problem though. Swapped out the front and rear sprocket and replaced chain all went amazingly however went to start the bike and now it won't start. Battery seems fine as lights come on etc. What could I have possibly disturbed when doing this?

@joescott4545 Год назад

I'm doing everything you are today on my k3 1000. Do I pull the rear tire back to get slack before tightening the axle nut or do you use the tensioner blocks and leave the axle bolt loosened?

@PatGix750 4 месяца назад

Hi, nice video, but why don't you use a torque wrench and thread lock as described in suzuki manual?

@bogdan3978 5 лет назад

give this man a like please.

@FreddyG687 4 года назад

This guys a bad ass !

@gsxr88 4 года назад

Have same bike 2007 gsxr 1000. Need to do this 22000 miles and still kicking!

@jmarquez808 5 лет назад

What is a good reference to find the flare on aftermarket chains. I’ve purchased ones that don’t have the spec and have gone off the pins that are already flared from factory. Any suggestions?

@MarkosManiadakis 5 лет назад

Nice

@razgriz21o 4 года назад

What type of grease do you put on the clutch rod when changing the front sprocket

@mikebrown2552 5 лет назад

Nice found it

@alikhan1783 4 года назад

Do you use thread lock for the front sprocket?

@timjamesvella 3 года назад

Do you sell any after market kits for gearing changes?

@Glories999 2 года назад

Is a gsxr chain & sprocket toast if the chain can move side to side on the rear sprocket?

@Ralfie193 Год назад

My clutch won’t engage after changing the chain and sprockets, what do you think went wrong?

@timbutton7745 2 года назад

What version D.I.D. chain did you use?

@jeromeleemanigault09 3 месяца назад

My question is how did he keep the front sprocket from moving wen taking the bolts out

@ryanmoore686 3 года назад

great video, but arnt you supposed to adjust chain on side stand.

@OMAR-gl9cp 4 года назад

Great video sir quick question how far in Marks of the swing harm should a new chain go

@PartzillaParts 4 года назад

Until you hit the right tension. When you get to the last 2 or 3 the chain is at the end of its life.

@robertharrold4214 5 лет назад

a small smear of mdma and a sioux chant will possibly be beneficial.

@TYRONE_SHOELACES 3 месяца назад

I came here just for ONE certian instruction ... when taking off the front sprocket, do I put the bike in high gear, neutral, do I leave the chain and back tire on and hold the brake on, a block of wood through the spokes? ... I was told that I can bent parts in the transmission if I put my impact gun on the front sprocket and it does not come off easy ...but this video did not show ANY of that data that I needed for my 1999 Suzuki GSXR 750

@TechTrendz937 4 года назад

When you wish you had all those tools and a garage to do it in 😟🙁

@websolutions6117 4 года назад

Hi John. I noticed that Partzilla sells BikeMaster torque wrenches (got an ad in email). Is that what you're using in this video? If not, can you use the BikeMaster ones in these videos. It would be nice to get your recommendation on whether or not they're any good. I'm thinking about replacing all my other torque wrenches with digital ones. Yours looks like it might be a SnapOn. But the SnapOns are too expensive.

@PartzillaParts 4 года назад

John's are Snap On. The Bikemaster wrenches are good, just not the top dollar Snap On cost.

@extremguzey1327 6 лет назад

Thanks.

@danielestes8473 4 года назад

When I put my bike back together, with the rear axle before I put the 36mm nut on does there have to or need to be a washer?

@PartzillaParts 4 года назад

There should be a washer there so you don't chew up the alignment spacer.

@cdubbleyoo 5 лет назад

I can't tell, are you setting the chain to 1" slack with the rear off the table? My understanding is the 1" is with the bike's weight on the suspension.

@mordyd1770 5 лет назад

The manual specifies ‘bike vertical and no weight on the wheel’ similar to some triumphs, always read the manual, don’t rely on urban myths. 👍

@baabaablacksheep6693 5 лет назад

Whilst we are on the subject of changing sprockets and chains... I if you do -1 front, +2 rear, what do you do about the speedometer? does it need to be re-calibrated/re-adjusted for the new setup?

@PartzillaParts 5 лет назад

Yes, if you change the tooth count in front or back, the speedometer will need a speedo healer or the like to adjust the speedo and make it accurate.

@baabaablacksheep6693 5 лет назад

Partzilla Thanks for the reply

@sandiegooliveira 4 года назад

Just a question.. I have replaced my sprockets from my gsxr 750 2008 and I decided to go down from 525 to 520 thickness and keep original number of teeth. For some reason when I’m riding I have my speedometer giving wrong speed. Any chance you can give me tips on what could be causing for me to have 110km on my Speedo when I’m only at 100km ? If you can help I would appreciate. Thanks San

@stevemitchell8771 4 года назад

Did you change the sprockets teeth configuration ? More teeth on the rear sprocket and/or one less in the front will change your gear ratio, making your speedometer inaccurate

@sandiegooliveira 4 года назад

steve mitchell thanks for the replying to my question. all what I did was to go down on a grit .. original sprockets were 525 and now they are 520 which is slightly thinner. Now the Rear sprocket has 45T n front 17T which is the original set up from Suzuki. I re tightened the front sprocket and I believed if it wasn’t done properly then the speed sensor would read incorrectly, but so far no change. Do you think my sensor could be the problem? Is there a way I can reset the bike ? Thanks

@BIKERtaj07 2 года назад

GSXR 750 crash igngen sawnd tik tik tik wats problam please help me

@dirtrider971 3 месяца назад

My cover is stuck and the clutch will not pull in

@Macnificent78_ 5 лет назад

Does the extension on the torque wrench throws off your numbers that the bolt needs to be torque to ???

@PartzillaParts 5 лет назад

No, it still exerts the same torque. It would only affect it if you changed the 90 angle of leverage.

@Macnificent78_ 5 лет назад

@@PartzillaParts thank you your video are so helpful

@zgarmy61 Год назад

What if i flared it to 6.5? 😅

@katerinasaplamidou1336 4 года назад

What is the torque you use on the rear wheel (36)??

@REPSOLHONDARR 4 года назад

no way it should be more then that check ur manual or google ur bike and found the the correct torque

@toshanjames9589 4 года назад

Why does the rear wheel axle nut not have a non friction locking implementation like a cotter pin or safety wire, that nut is subject to rotation....

@johnr2052 4 года назад

The axle has a flat spot on the brake caliper side. The only way for that axle to spin is if the bearings cease and fuse to the axle. Causing the axle to spin to the "right". Which will tighten the nut even farther. you will have a whole nother problem if that happens. So as long as it's properly torqued it should not come loose.

@REPSOLHONDARR 4 года назад

im doing this on my 2008 honda repsol 1000rr the only part i dont understand can some one please explain to me the wood part with the 2*4 why is he doing that

@johnr2052 4 года назад

It's pulling tension on the chain causing the wheel/axle to push forward against the adjustment bolts.

@SadisticThrasher 5 лет назад

I cant get the hexagon bolt off the front chain. it just rotates with the front chain sprocket...and it is shut tight. any advice?

@PartzillaParts 5 лет назад

Are you using an impact wrench?

@cdubbleyoo 5 лет назад

It is easier to loosen the front sprocket bolt/s if done before removing the chain. Then all you have to do is use something to brace the rear wheel. If no impact wrench, you can use the old chain in various creative ways to hold the the sprocket in place while you use a wrench on the bolt. Or you can wrap the old chain back around the rear sprocket and use small metal implement, zip ties, small clamp to hold the chain together and place a piece of wood at the sprocket (like he used when adjusting the chain) or through the wheel and against the swing arm (probably easiest with mag-style wheels, un-possible with wire wheels) so you are leveraging against the wood instead of the transmission.

@WillThePatriot 4 года назад

What size is the torque wrench, 3/8, 1/2?

@PartzillaParts 4 года назад

You can use either, but for axle nuts, it's recommended to use the 1/2"

@NelsonCreekCustoms 6 лет назад

How long you been doing this

@PartzillaParts 6 лет назад

Too long!

@Macnificent78_ 5 лет назад

I have a 2007 gsxr 750 I change my gear -1 +2 how link do I need take off I had a 520 set

@PartzillaParts 5 лет назад

I'm reading this as down one tooth in the front and up two teeth in the rear. With that adjustment, you should be pretty close to original link count. There is no specific formula to it. Just put the chain on and adjust as needed.

@Macnificent78_ 5 лет назад

How far should I push the rear tire up all the way forward or half way ???

@cdubbleyoo 5 лет назад

@@Macnificent78_ after you remove the old chain, set your screws so they are adjusted all the way in or (far enough in to leave lots of slack for the new chain). Once your got the new one on and linked, use the left side adjuster to set the chain to the correct tensioner and then set the right side adjuster to match the left.

@mohamedelkhatib1172 3 года назад

How is your bikes performance with -1 front and +2 rear as i have 2016 gsxr 1000 planning on doing the same do you recommend it or is it enough with only +2 rear with stock front ?

@hebergarcia1146 5 лет назад

I dont know if this sounds ignorant, but I dont understand what hes doing when hes "bumping" the chain or what the piece of wood is for.

@PartzillaParts 5 лет назад

It's just a simple way to pull the wheel and axle all the way forward before you do your chain tension. The wood binds on the sprocket and slides the axle forward.

@jamesmcbride4329 2 года назад

Jon brother there is beak down in the websight . You tioe in part it gives you no description just number well it sent me what I'm saying spent grand and received wrong shjt and paid extra for 2 shipping so I riding ima rid heckle y'all

@jamesmcbride4329 2 года назад

I' ant riding

@CarsMeetsBikes 3 года назад

BE CAREFUL about putting Loctite on the speed sensor rotor bolt. I have reason to believe it is why my speed sensor rotor just grenaded itself the day after replacing chain and sprocket