How To Cut Crown Molding For Beginners - Inside Corners

Подписаться 42 тыс.

Просмотров 982 тыс.

50% 1

Here is a new video for OUTSIDE CORNERS!
• How To Cut Crown Moldi...
Thanks for the support everyone!
I hope you guys enjoy this quick video on crown molding for beginners. This trick usually only works for perfectly straight corners. You will have to get more advanced when doing crown in an old home and coping the crown will have to be done. How to cut crown molding isn't rocket science, you just need to practice over time. I do it very little! I'm not an expert in the slightest!
On the hunt for a new miter saw? Here are my recommendations!
Bosch 12" Dual-Bevel Sliding Miter Saw - Corded
geni.us/wxwHPK
Ridgid 12" Dual-Bevel Sliding Miter Saw - Corded
geni.us/UBBW
DeWalt 10" Single-Bevel Compound Miter Saw - Corded
geni.us/VoKmtB
Milwaukee 10" Dual-Bevel Sliding Miter Saw - M18
geni.us/o1xrwZ
How to cut crown molding-inside corners!
Please consider joining our community on Facebook. Group - TheDurbinCompound
Some of my Favorite Stuff! I have done reviews on a lot of these items! I may receive commission on some items.
Best Garage Lights! The best I’ve found!
amzn.to/2zCYNdJ
15% DISCOUNT CODE: 151PMNBX
Check Out Some Of My Tool Reviews!
• Tool Reviews
Milwaukee Rolling Toolbox 48-22-8426
amzn.to/33Gm2h6
Milwaukee Large Toolbox 48-22-8425
amzn.to/2X1bK8r
Milwaukee Toolbox 48-22-8424
amzn.to/32Fkq5W
Milwaukee Slim 11 Compartment Organizer 48-22-8431
amzn.to/2p9l5yK
Milwaukee Slim 5 Compartment Organizer 48-22-8436
amzn.to/2X5oCL4
Milwaukee M12 Compact Inflator 2475-20
amzn.to/2X6XUSd
Milwaukee M18 Oscillating Multitool 2626-20
amzn.to/2CE9tXu
Milwaukee Switchtank Backpack Sprayer
amzn.to/2rDyEHA
Check Out My Work Pants Series!
• Chasing The Best Workw...
Dickies Flex Work Pants (Best price is on Amazon)
amzn.to/2qPSUVL
Blaklader X1600 Pants
amzn.to/2NHM1iz
Check Out My Work Boot Series!
• Chasing The Best Work ...
Rock Rooster Wedge Sole Work Boots
bit.ly/3g9oEts
Timberland Pro Gridworks 8” Boot
amzn.to/32DpYxt
Timberland Pro Boondocks 6” Boot
amzn.to/33FaudK
Thorogood Moc Toe 8” Boots 814-3800
amzn.to/2X9MJrU
Electrician Gear / Test Equipment!
Fluke 1AC Non-Contact Voltage Tester
amzn.to/2NEqHuf
Fluke T6-1000 Field Sense Meter
amzn.to/2Qf22y2
Fluke Ammeter and Multimeter Kit
amzn.to/2rDFVal
Feildpiece Manometer SDNM-5
amzn.to/33IWv6G
Fluke 62 Max Infrared Thermometer
amzn.to/2Qf2OuW
My Favorite Flashlights!
Streamlight Stylus Pro Pocket Light 100 Lumens
amzn.to/34QPGjy
Surefire Stilletto Pocket Flashlight
amzn.to/2qPVUS1
Surefire Tactician Pocket Flashlight
amzn.to/36X15Al
Thanks for watching! Stay tuned for more!

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 280

@oscarfig1990 3 года назад

I watched several video where they just kept saying it was easy, but I left the video more confused than when I started. This was by FAR the most informative

@wickedmosher 2 года назад

The idea to mark the tape on the saw is terrific. Thank you for sharing.

@eroom2087 2 месяца назад

Best on the internet for explaining how to cut this molding and measuring

@marro5000 Год назад

Of all the videos on youtube, yours is the only one that truly described and showed in detail how inside cuts were done. Thank you, Thank you!

@311mdub 3 года назад

Also remember!!! Never cut directly on the line! The saw blade is 1/8 thick, and if you cut directly on the line then it will shorten your piece by 1/16 if not the 1/8... blade needs to be on the outside of your line if that makes sense! See and have made tons of errors shorting pieces that way and it’s extremely frustrating

@aaronfrandsen9160 2 года назад

That's what caulk is for

@TheDurbinCompound 2 года назад

Do your best, caulk the rest!

@timkilman Год назад

Putty/ caulking is for holes only. Always fresh blade, and its like shooting a gun, line up 3 points. I sight both front and back egde of the teeth on blade with proper side of mark. Line up 3 points and cut away!

@EbkEbk-ok7ym Год назад

You not explaining if the walls aren't flush 90°it won't meet up

@BigBoss-db5gm Год назад

Thank you for the sound advice

@Dostis Год назад

Long side bottom for inside corners and long side top for outside corners is such a simple yet awesome explanation. Thanks !

@user-lw4ku7mt6p 3 месяца назад

Absolutely! Really helped me visualize it!

@1badsteed 2 года назад

This right here! I also spent hours, tilted blade even and nada but heartache! Thank you so much for this simple and effective method

@randydicotti3975 2 года назад

YOU, Sir are a genius and teaching guru. I watched other videos and was still lost. 5 minutes after watching your superb video I was installing crown molding like a pro! Can't thank you enough. Subscribed !

@Cookefan59 3 года назад

I don’t know whether it’s because I’ve already watched a few dozen videos on this or whether it’s just that this guy finally made it make sense but now I GET IT. I now understand the inversion principle PLUS I now understand which side needs to be longest given an inside or outside corner. THANK YOU, THANK YOU, THANK YOU! 🙏🏽

@fingolfin9086 2 года назад

Right there with you, I’m like 6 videos in and this one finally made since. Thank you durbin!

@TheDurbinCompound 2 года назад

I really need to make an outside cut video for you guys! It’s pretty simple, just flipped the other way.

@51-FS 2 года назад

The tape measure trick was enough for me to find a different video

@bobsimcox1194 Год назад

Still not sure how this inverted angle cut would fit squarely in the corner and flat against the wall?

@dewaynebraley2820 3 года назад

I could tell you was a quality trim Carpenter when you mentioned how wide of a mark The Carpenter's pencil makes that's good work buddy keep it up and I like your work

@jeffguenther223 2 года назад

Substitute the word "were" for the "was". You don't say " I could tell you"was" a quality .... it is "were".

@filibertonunez8872 Год назад

I just wanted to thank you for the great tutorial video! It’s excellent the way you explain it is easy to understand. I completed my project…God blessed you and plz keep posting more⭐️ ⭐️ ⭐️ ⭐️ ⭐️

@rcaction6866 3 года назад

Turn the crown upside down is golden advice! Sets the pitch automatically when sitting on the top base of crown. Thanks for the accurate measurement tip too.

@darrellblair5818 4 года назад

I am installing crown moulding right now and got so confused. Looked on You Tube and immediately found you channel. Thank you, thank you, thank you. You just got a new subscriber. 👍👍👍

@TheDurbinCompound 4 года назад

Awesome! Hope to bring you more value in the future. Check out todays video for some more miter saw tips

@mindlessmeatball6239 2 года назад

Thank you for this! I’ve had a hard time visualizing how the inside corners of the crown molding would go together. You’ve made this process 100% easier!

@10feethighermaga12 2 года назад

Thank you, just finished my room and it cane out perfect, couldnt figure out how to cut 90, but after i put the top of the crown molding at the bottom(table) of the miter cuts went perfect!

@karenhenderson8917 3 года назад

Excellent video and instructions. You solved my problem of how to cut a corner for crown molding. Memory had failed me and I needed a reminder. Thank you so much for simple instructions.

@daleney7211 3 года назад

well done marine, struggled with molding cuts, you made it clear & simple, love the accurate measuring tip as well . AIRBORNE !

@marilynn8613 3 года назад

Thank you!!! It’s so stupidly simple To measure accurately with the tape measure now!

@NubianP6 Год назад

Seeing how easily your blade went through that molding made me to realize that it’s definitely time for me to get a new blade. 🤦🏽‍♀️ Thanks for the video!

@andym3995 4 года назад

After going through a few videos, yours was the only one that does not require a jig and easy to understand. Thank you so much!

@TheDurbinCompound 4 года назад

Glad I could get you started! Good luck

@michaelreid7396 2 года назад

The absolute best video I've seen on cutting crow molding. Thank you!

@SuperDavidBrothers Год назад

When I was in high school, I took both a construction class and a woodworking class and man was it a lot of fun for sure!! We didn't make crown molding cuts but we did make miter cuts, rip cuts, cross cuts, etc. In construction we also learned about how to make a bird's mouth cut where I think it's cut at a 45° angle or something and we also learned how to build a shed as well. In woodworking we also learned not only just how to make accurate measurements and glue them up, but we also learned how to make fun projects like I made a coffee table, flag, Chinese Checkerboard, and a big clip as well! Man was it such a huge blast and I really hope to do more of that stuff in the future now that you showed us this video man thanks so so much for this!

@maxtanicfilmsdiy 2 года назад

Dude you are the MAN!!! That is a fantastic video brother 👏 👍 BRAVO!! We had never done crown molding, watched a bunch a vids and they were like WTF???! You are number one my friend!

@EmpireRiSing 3 года назад

Man you was doing so good.. I wish you would have just cut the 71 5/8 then apply.. that would have been much clearer to the inside/ outside corner narritive

@mattozx6rr 2 года назад

Thank you explaining the cuts and orientation in terms This DIYer understands. You made it simple!

@stevewilson7857 3 года назад

I was getting ready to murder my saw for my stupidity. Thanks for saving me money :)

@richardsumter1139 3 года назад

Best video yet for simplifying inside cut, thanks!

@ronturner5674 Год назад

Watched a few videos of others and gotta say I couldn’t figure which way on the longer point and you was the only one I saw that actually said the part of how to know which is inside and outside.Longer point to bottom of crown when going inside corners then longer on to of crown for outside.I now know when going to cut without holding board up as how it will be now I have that reference made my day go from long to accomplishment thank you

@Donna-vh5ym 2 года назад

I know I'm a year late, but thank you for explaining it so well. Turn that crown upside down. I'll never forget it just like Lefty loosey righty tighty...lol. Thanks again.

@xcaliburG37S 3 года назад

You made this easy to understand. With a little practice I can do this without hiring some crown molding installer.

@user-lw4ku7mt6p 3 месяца назад

Thank you so much! I think I can finally do this now. Great job explaining it!

@jessicadiego7841 3 года назад

Thank you my husband was killing himself trying to figure this out. I showed him this video now he got it. Thanks again 👍

@Cornphobe Год назад

Thank you for this!! The crown molding in my dollhouse was giving me trouble, but this helped so much!!

@wilsonchery6961 2 года назад

Just subscribed!!! Thank you! You would not believe how much trouble these crown moldings have given me!!!

@youtoldharpotobeatme5023 2 года назад

Amazing instructional! Thanks. Easy enough to understand. I was blind but now I see. 😂

@andolof8886 3 года назад

Thank you for this video! After having tried for a couple of hours turning the pieces around I found your video and then it was astonishingly easy to make an internal corner!

@jeffreyesguitar5129 2 года назад

I could not figure out how to get the angle. This video helped so much. Thanks!

@Twohunnidpercent Год назад

Really appreciate all the solid bits of information! Now to put the “jingle” to use lol!!! Thank you for taking the time to create and share!!

@patricenoutchegueme120 2 года назад

the best videos to know how to cut crown Molding. thank you a lot

@ronemtae3468 Год назад

Glad you’re using a basic saw I see some videos would have the sliding compound saw with the laser indicator on it

@Johnworksdaily 3 года назад

Pain is just weakness leaving the body! Awesome.

@donnawalchli4176 3 года назад

Amazing. I aspire to be a Do-it-Herself and your videos give me the confidence to try stuff on my own. Thanks so much!

@TheDurbinCompound 3 года назад

That’s awesome! I hope to see you around the channel and teach as much as I can in the future!

@rbilardo47 4 года назад

Semper Fi. Good instructions for the inside mitre cut, I wish you would have cut outside corners. Only because a lot of us are visual, and learn better by seeing rather than by being told how to do something. Thanks for sharing.

@Bassmunchkin1 4 года назад

Hundreds of videos on internal mitres, but external mitres is a rare explanation, I to would like to see an external mitre done.

@fatbuddhaboo 2 года назад

Excellent info, . After two bad cuts hopped on here and your video explained it perfectly. Thanks.

@chrisp4190 3 года назад

Best and easiest crown video I've watched. Thanks brother!!

@nylemax_drive 4 года назад

You are the only one who show the easy way... others make it even worst.

@TheDurbinCompound 4 года назад

👍👍👍

@prakkari 6 месяцев назад

It’s helpful to glue down two pieces of wood with double tape as support on the line you made on the saw. Very helpful and makes everything stable while sawing specially when cutting short pieces.

@cowlumbus 4 года назад

Straight forward and to the point. Only thing I could build on it application use...take a measurement with a digital angle finger and apply it to not perfect mitre cuts!

@gooch1078 3 года назад

Thanks man with your video I finally figured out how to do it.

@zuup9043 Год назад

This was the best explanation I’ve seen for cutting inside corners!! Thank you

@erikh3867 2 года назад

Thanks for the video. I figured out how to make crown cuts by watching sitting in the passenger seat on the way to the job, got there and ran 80 lineal feet.

@DennisMathias 9 месяцев назад

Nice tips. No coping. I don't know what to say about that. If everything is perfect on the corners, fine. But any little variation and you're screwed.

@TheDurbinCompound 9 месяцев назад

This video is purely for beginners. Coping is more advanced and will come later in skill sets

@zoellar11 2 года назад

Quick and simple video for cutting crown molding. I installed 400 feet of CM in our house about 15 years ago but today, I installing four pieces in our toilet room so your video was helpful. My only negative was your comment at the 4:00 mark when you were getting ready to cut a small piece of CM, really too small to safely cut and your comment was it "a little too little for....a little to small but WE WILL MAKE IT WORK". Also, I didn't see any safety google being used when using the miter saw. One should NEVER has such a casual attitude around power tools and speaking from personal experience, one should ALWAYS wear safety googles. About 45 years ago, while sanding a transom on the back of a 48" wood power boat and NOT wearing safety googles, a little piece of old chipped paint fell off and landed on my eye surface. We tried to wash it out on the job site.....no success.. The surface tension had it firmly in place....I had to go to an ophthalmologist and even he spent several minutes before he was able to remove it. SAFETY FIRST.....for your EYES and your digits !

@Squirtkus 5 месяцев назад

Thx man, this really helped me out! ❤

@tgs989 4 года назад

Good info for us beginners. Thanks

@lisasmith8316 6 месяцев назад

Measuring trick was fantastic

@mrs.medeiros7090 2 года назад

Thanks to this video I just cut a perfect outside corner. I was trying to cut an inside corner but still

@jorgecazares3963 3 года назад

Thank you very much it is the simplest video and the easiest to understand Muchas Gracias 😎

@damyan- Год назад

I should make a video on the guide m my dad created for himself to cut crown, man can do it!

@JonDunnmusician 2 года назад

Good positive energy and extremely careful cutting small pieces they are the most dangerous!

@koriandmickelamichaels-vz8ok 8 месяцев назад

Thank you. This was so helpful brother!

@seek_wisdom7772 3 года назад

Great explanation for beginners. Thank you!

@gauravarora2986 2 года назад

Very nicely explained! It was super easy the way you explained inner cuts! Can you please show how to make outside cuts?

@stevenpodolsky5164 Год назад

Most important thing is to make sure your saw it set up correctly. Make sure the blade is square to the table and the fence. Even the slightest bit off throws all your cuts out of whack. Plus most inside corners aren’t 90 degrees and same goes for the outside corners. Good luck everyone.

@richardknauf6751 Год назад

Love the tape that's a lifesaver because crowns gotten too big for my crown sets.

@philiptamer8995 4 года назад

YOUR THE MAN SIR !

@irobin4sgr848 3 года назад

You made this easy to understand! Thanks 😎

@pennykinsella3683 Год назад

Oh man! Thank you so much for this!! So much simpler!

@BigDawg-re2ht 4 года назад

Thanks for the video, stay safe during these crazy times from Chilliwack British Columbia

@TheDurbinCompound 4 года назад

Thanks for the comment!

@jaysmack8054 2 года назад

Best one yet !!

@MrStanwyck 2 года назад

That was very helpful and straightforward…. Thanks for the video……

@aaroncervantez8997 4 года назад

Nice video straight to the point 👍

@1942nn 3 года назад

I figured out this crown cutting method myself, but had trouble to measure the exact length !!! This video teaches me the trick, so simple that I never thought about it, I am only good at figuring out complicate stuff, pretty weird me. I just finished 3 crown molding in my home (8 ft x 8 ft, two of them at 4 x 4), still have one more to go 10 ft x 4 ft. It's real fun to do this. To be honest, I did one wrong cut per room, my mind was else where when I made this cut and all I can say was Oh. Sh.sh sh sh.. Forgot to mention, the recessed areas (light fixture boxes on the ceiling) are 6" deep !!! I had to install flat molding at the edge, then above it the crown molding. The crown molding overlaps the flat one by nearly an inch.

@DewayneGore 4 года назад

Bud, that is the simplest and best explanation of how to cut inside corners on crown molding that I have ever seen. Thanks.

@TheDurbinCompound 4 года назад

Well I appreciate the comment! Thanks!

@scottmccollum2127 3 года назад

Very helpful my job works with crown seldomly so haven’t had a lot of experience with it

@andrewcannon205 2 года назад

Well explained, most people down explain very well.

@curtisfrazier25 2 года назад

Thanks Durbin Compound! Good tips!

@jackbishop7693 4 года назад

I appreciate these basic tutorials man. As tgs said, it's much appreciated amongst us newcomers. Keep it up dude!

@TheDurbinCompound 4 года назад

I really appreciate your comment! Hope to see you around the channel

@jowiislizzant1384 2 года назад

You rock! Thank you for the video

@MrPromerican Год назад

Thank god for this video. I didnt have to buy a crown molding jig..

@straightouttathe7thcircle431 2 года назад

Thanks, man! Subscribed

@jessedavenport4647 4 года назад

Dude,you rock

@g07isma Год назад

Great video man

@hassanfawzi4117 4 года назад

Good job well done !

@kevinchafe6844 4 года назад

Awesome video and instruction

@bruceflora8975 4 года назад

Thank you, very helpful

@matthewotis3594 Год назад

When running trim I like to use a school boy pencil. Can even erase your marks a little bit if needed , until you break off your eraser.

@russell311000 4 года назад

Thanks bro, I'm nervous but I'm going to do it.

@TheDurbinCompound 4 года назад

Good luck!

@freedomfirst5420 3 года назад

Thanks Double D!

@justinburgess8269 10 месяцев назад

Nice explanation ✊

@dennisranck1613 Год назад

Thank you for the information.

@2scents434 Год назад

Very well taught ty sir Semper Fi

@UCfan 3 года назад

Thank you so much!

@clintonchance8220 10 месяцев назад

Very helpful

@jeffreymeeks4051 4 года назад

I have an older guy willing to bring me along on a molding job and it will be my first time being immersed with something like that. Thanks for those tips!

@TheDurbinCompound 4 года назад

Good luck!

@jeffreymeeks4051 4 года назад

@@TheDurbinCompound thanks man! Really hoping it transcends into something long-term.

@TheDurbinCompound 4 года назад

Jeffrey Meeks finish work is fun and definitely brings all the other trades work together. Very satisfying to put the final touches on everything!

@jeffreymeeks4051 4 года назад

@@TheDurbinCompound that's what I've heard with that kind of work, I'm sure it will be exciting!