Instagram: @thturbo2v Email: thturbo2v@gmail.com Modular Head Shop- www.modularheadshop.com cage install and fab work by Rusty Olson at Boars Nest Fabrication: / boarsnestfabrication Transmission Built by Cameron at CPR Transmissions
From the horror stories I’ve been told about mod motors, you made that look easy man. Most dudes would have just said, yeah I didn’t have time film it all but it’s together now and ready to go in the car. For a RU-vidr that’s just a normal dude like the rest of us, your doing an awesome job my friend.
Great to see ya back and building the beastly Turbo 4.6. I'm currently saving for a '99-'04 GT. Before, I hate d 4.6's but seeing what you've done with yours it's definitely opened my eyes
Great video man!! I know it’s an older upload but I’ve been loving watching your channel! Definitely helped walk me through this so I can tackle it with my 4.6l build!
Oh my goodness man, this is exactly what I was waiting for! Heckin hell yeah! I think I speak for everyone when I say I appreciate the time you took to put a video up decreeing the 4.6! I’ll be watching this a couple more times through before I put the block back together sometime in the coming months. My bad on the late reply, busy as heck at work and my daily driver has been full of shenanigans and problems. It’s much less fun fixing the car you need that’s breaking down than working on your project car to make it faster, I’ll say that. Anyway, super psyched you got this video out bro! Exactly what I was hoping for!
My dad and I would like to thank you so much for creating this video. Your video was easy to follow and allowed us to Degree the cams in our 2000 GT in our own garage. We would not have been able to do it ourselves without your video.
They can disagree all they want but the truth hurts feelings , if you opened up shop i believe in you making it👍🏻 i had 2 different “mechanics” try pi swapping my 98 gt and both unsuccessful leaving me unhappy and wasted lots of money on parts and labor, so i had to DIY ls swap my mustang and watching how you build great 2v’s makes me regret the ls swap lol keep up the good content thank you
I needed a good bed time story right before l go to sleep. This was perfect for that 🤗 Andrew Papa, jokes aside.. Thanks for all the hard work and info you provide us 2v guys... waiting for your car running again 😉
Good info in this video, btw this is the same process to degree the cam in any engine, LS, sbf, sbc, bbf, bbc, Chrysler. It's just one extra cam, I will be doing this soon on my 2v cam swap.
It is a little confusing but I am grateful you are taking the time to explain this stuff. I have no clue how to build engines but with some of this information I hope it will help later. Thank you!
Nice video. I just went through all of this on my engine. Not to many detailed videos out there. But did get mine running and have my tune/dyno date set. Wish I would have had that crank tool, made it look way easier .
@@andrewlavender08 I will have to order one for the future. I have the tdc crank tool. Just didn't know about the one you have. And I know I will have the motor tore down at some point again. I plan on starting to get some track time in and begin all the safety requirements to attempt to compete in small events.
My favorite channel on youtube easily. I v8 swapped my new edge with a NPI setup, you have me ready to tear it apart LOL! I want a cheap power adder for the time being, should I put P.I. heads on my NPI block? I already have a P.I. intake. Thanks!!! super helpful videos
I guarantee this video gets thousands of views. One of the most necessary videos for 2v owners. Definitely wish I would have went this route with this equipment instead I had to weld a lash adjuster and follower. Replacing the valve springs on top of that while engine is in the car is an absolute pain.
Curious to what your car weighs and what transmission you run? Very impressed with the performance of your on going project. Keep up the great work and sharing the information. Thank you.
@@crownvictorialifestyle4421 Run your car not your mouth man. I've gone faster on stock NPI parts than your lead sled Vic is gunna do with even 3x the budget. I sell used parts and have been into modulars for a lot of years so forgive me for not knowin about a modular piston stop tool (which I even thanked the man for posting about). I guess having to use a micrometer for tdc is bordeline caveman to you. As for the actual math which you hunted me out for the third time over, the base circle of the lobe must be reduced to gain lift beyond .550 at the valve. That's not a guess, it is fact. I never said it cannot be used. Lowering base circle only adds to the space compensated by the slow bleed lash adjusters as stock on pi(vs fast bleed downs in NPI like I have which is entirely why this conversation mattered in the first place). The lash adjuster doesn't take up lash instantly and having less base circle means when they do see oil pressure, they are becoming solid up further on the lobes ramp meaning your low lift and duration values are not being fully put the valve. You do not see full lift or duration unless the lash adjuster is solid on the rise of the lobe. I won't go as far as to say it's detrimental but it certainly messes with the geometry of an otherwise maintenance free valvetrain and can likely lead to excessive wear. I also know there no way in hell your fitting .575 lift on even 220° duration at .050 without flycuts which 99% of people dont want to do on budget pi motors anyways so it's just a scenario anyways. I'd bet you Andrew runs a much higher viscosity oil than stock which will help the adjuster pump solid faster. There's no right or wrong answer and try not to get so offended on behalf of me next time.
@@crownvictorialifestyle442129 and narcissistic, call me impressed. I am lost as to how this post warranted the internet tuff guy flex aimed to me being the "person who talks shit who don't know things on the internet". You give a great image to the people who actually may try watching your content. Your happiness comes from money money money and getting to spend it. I have more hobbies than just my Stang and buying aftermarket car parts especially when Im already stocking and selling mod parts. I'll keep going faster with oem parts and I look forward to seeing your twin turbo Navi Vic. Shouldn't be too long with a blank check.
@@crownvictorialifestyle4421Btw, It's likely smarter to just not engage on the internet when you can't leave your own comments up. Saves the time of going back and deleting them.
Hi Andrew. Thanks a lot for this great video. I already got my trick flow heads with 38cc chamber and I will buy a rotation assembly from mmr that on stock chambers gives 9.5 compression ratio. Not sure what would it be with 38cc... do you know? Also, in regards of this video how do you know what degrees you are looking for to set up the cams.? I am running the trick flow track-max cams. How many degrees I should set the engine? Thanks in advance and you are the best!
I was actually looking at the Bullitt 2v Mustangs and I was going to swap the motor out for an iron-blocked built 4.6L 4V lower compression engine ready for supercharging; however, I was looking more and more at turbocharging the engine that is in there... Obviously, I will have to do some work to it, but I was surprised at how much power those 2v's can make!
years later....thanks. Would the same process for the 3V since it to is single cam just 2 intake valves? other issue is the VVT which is locked. New motor for road racing thanks.
What's the part number for the crank tool? I ordered one that claims it's for all ford v8 but the center is too big for the crank, I can turn the adjuster set screww but I think the oval movement of the degree wheel is not accurate.
How would you go about verifying timing on a 2 valve 4.6 that doesn't have any balancer marks for TDC. I am going to be installing ms3 standalone and need to verify timing. Engine is fully intact in the car.
Running stock upper cam gears here, I've watched countless videos on this process. This one was the easiest for me. But I have a question. Comp cams in my engine. How often do you get a degree variance LH to RH banks? My RH bank is 6 degrees R to get 109 ICL. My LH only took 2 degrees R to get the same number. Have you seen this before?
If I remember correctly I see about 2 degrees diffidence between the right and left back to get my desired ICL. I’ll have to go dig in my notes and see for sure
@@andrewlavender08 a few months late here but after discussing with MHS they said with stock cam gears thats not unusual. Regardless motor runs great now. Thanks for the video and reply!
Hey Andrew I have a question I hope you can help me with. So I got a 96 mustang gt, the motor have forged rotating assembly. Npi heads and intake. The pistons are a true flat top piston. I got the car with no specs on the build but doing research I see that flat top pistons with not relieve cut outs for the valves gives the motor a 10.99.1 compression ratio. That explains the reason I have to run premium fuel. Now my question is would I be safe to run a blower or turbo? My end goal is at least 450wrhp but if like 500rwhp if possible. Any advice?
@@andrewlavender08 I appreciate the reply Andrew. I know you're very knowledgeable on these 2v motors and im sorry for what happened to your block. You was about to make history for the fastest 2v I swear!. But anyways if you had my set up what would you do to the car personally? Npi heads and intake built motor flat top pistons with a 10.99.1 compression ratio
Does different tune will change the idle sound of aftermarket cams on a 2v? Like changing A/F and timing? What Rpm at idle would set it for best sound?
Andrew Lavender thank you Andrew. Because i think the lope is not exactly the same after the tune but it could be just me. But the gain are awesome. 41 rwhp
Anthony Mayz yes i have done the cams alone. But i already had Jlt cold air, tfs plenum, accufab 75 mm TB, slp LT headers, O/R x pipe , SLP cat back Steeda’s underdrive pulleys and SCT tune on the car before the cams
@@andrewlavender08 Thanks, I have an 04 GT and would like to build a 2 value with scary power and it looks like you are the source of knowledge. Sorry about that shit deck job that blew past the head gasket, hopefully it will get squared away with little to no cost to you, thanks.
Great information! Thank you. I didn't see a link to the crankshaft socket you mentioned so I looked at Summit. I think this is the one - I hope anyway because I just ordered it! www.summitracing.com/parts/cca-4798
My name is josh and I have a2002 mustange gt 5 speed I have a motor out of a crown Vic I’m prity good with working on thanges but I’m scaird of messing this job up and could really us some help if you could find it in your heart to help me bulid a motor for this car I would forever be indebted to you I have stage 3 cams comp springs re trainer short tube headers stage 3 clutch which is all ready in pleashelp me out sir I’m at a loss here and I thank the car siting is just causing me to lose it father I really could use some help I don’t have much money but I have some saved I watch you all the time you do Amazing work no one wants to help people any more I thank it could be good for you Chanel to help the less fortunate I trueley love this car pleas try to help me pleas bro
