How to install crankshaft speedy sleeve ( Cummins )

Подписаться 55 тыс.

Просмотров 5 тыс.

50% 1

How to install crankshaft speedy sleeve ( Cummins ) this how I install the HD speedy sleeves I a Cummins crankshaft. You do it the same way on the back as well.
Check the 12v rebuild series - • How To Rebuild A 5.9 C...
link to the mahle seal i use ------------ amzn.to/3uNWyLh
Thanks for watching and subscribing
For you guys that would like to help support the channel. you can find links to donate on paypal and become a patreon on the banner of the of the channel page as well as below for a amazon link.
patreon ------ / cutteruprob
paypal ------- paypal.me/cutteruprob?locale....
amazon link ---- amzn.to/3cP6LBB
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting

Авто/Мото

Опубликовано:

31 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@chrisnmfl 6 месяцев назад

The last time i did mine used a electric heat gun to expand the sleeve worked very with the radiator untouched.

@brcron007 3 года назад

Another good tip on "Rob's Tip O The Day" Thanks.

@CUTTERUPROB 3 года назад

Glad to help

@jasontruman1215 3 года назад

Never used one before but that’s good to know the sleeve is hardened so it’s not a bad idea to use one even if your crank is in ok shape. I’ve always just pushed the seal in far enough to get it to a fresh spot on the crank and have even seen someone stack two seals on the front cover, he put hundreds of thousands of miles on it with no leaks.

@CUTTERUPROB 3 года назад

can't say i have seen two seal but i do the seal in a different spot all the time

@frannybruhh4882 Месяц назад

So I should just throw the dust seal out?

@CUTTERUPROB Месяц назад

I do.

@timothymroberts2949 3 года назад

Can you show how to remove a speedy sleeve if installed incorrectly or is damaged? I have one that has Nick on it and need to pull it off but not sure how. Great video Rob

@CUTTERUPROB 3 года назад

i will do that

@doserdiesel 3 года назад

What's the part Number for the kit with the speedy sleeve?

@CUTTERUPROB 3 года назад

here is a link ------- amzn.to/3uNWyLh

@doserdiesel 3 года назад

@@CUTTERUPROB thanks man!

@elroyelblander6277 3 года назад

👍👍👍👍

@CUTTERUPROB 3 года назад

🙏

@Banjoandguns 3 года назад

Why no lube

@CUTTERUPROB 3 года назад

no lube on ?

@timothymroberts2949 3 года назад

I think Big Thumb is referring to the seal and it being installed dry. My understand of the materials used because of the nature of the material. It's not like a traditional seal that uses a spring to maintain tension. It's similar to heat shrink tubing. The spinning initially causes the seal to slightly shrink to confirm to the crank. This is why installing it square to the crank is so critical.

@CUTTERUPROB 3 года назад

Well if that’s what he was asking. I could not answered it better myself