How to Install Valve Covers - Rebuild the 289 Ford - Part 20

Подписаться 11 тыс.

Просмотров 2,4 тыс.

50% 1

Today at Alf's Mustang Garage we are installing the valve covers on our 289 rebuild.
The book I recommend you buy for your build. You will not get all the information there is to know from watching these videos. This book will help guide you through everything. www.npdlink.com/product/book-...
Things I used in this video.
As an Amazon Associate I earn from qualifying purchases
Fel-Pro Valve Cover Gasket amzn.to/3RaELNb
Valve Cover Load Spreaders amzn.to/3Z5rbMY
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
Basic mechanics tool set amzn.to/3ob7q2B
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments below. What kind of project are you working on? What Mustang are you daily driving?
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.

Авто/Мото

Опубликовано:

8 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@donaldwilliams4038 6 месяцев назад

Great video as usual. Have these Fel Pro valve cover gaskets on my 65 with a BluePrint 306. I prefer to use studs for the valve covers instead of the standatd bolts. With the studs installed you can drop the gasket on and then the cover and keeps everything aligned. Also, we just fixed a leaky C4 tranny today on a 65 using your video. It was the reverse band case bolt and seal. Your links to the parts needed were spot on. Keep up the good work.

@AlfsMustangGarage 6 месяцев назад

Awesome! Thank you I'm glad to hear they are helpful. Good tip on the valve cover studs too!

@bucky0868 11 месяцев назад

Looking good ! Wish i was closer, i would bring my ‘68 to you for a rebuild

@AlfsMustangGarage 10 месяцев назад

Oh dang, where about are you?

@d1entertainment989 20 дней назад

I have a 69 mustang grande- do you still suggest using no silicone for the gasket?

@atylerpearce 7 дней назад

You're in Utah? My stang has a tired 289 in it. I'd love to rebuild or maybe upgrade someday.

@AlfsMustangGarage 7 дней назад

Oh ya we are in Utah. Let me know if you need us to build you something 😁

@atylerpearce 7 дней назад

@@AlfsMustangGarage It has some power... For it's age. I believe it was rebuilt in the 90s. I would love a 302 stroker or a Windsor. Something with some UMPFH. I've been looking at crate motors but its all $$$. 🤣

@AlfsMustangGarage 7 дней назад

@atylerpearce well ya it's all money and the cost of machine work and parts and labor have all gone up. But a decent stroker can still be built pretty affordable I feel like. You're more than welcome to call the shop and we can talk about options and your car.

@hughphillips67Mustang 11 месяцев назад

Can you use longer bolts if using load spreaders or those plug wire organizers? Never mind. You answered it in the video as soon as I ask the question. 😂

@AlfsMustangGarage 10 месяцев назад

ha ha!!!

@yakmalxc 3 месяца назад

Im using the same gasket with edelbrock valve covers and having massive leaks from both covers. Should i just put rtv on the gaskets?

@AlfsMustangGarage 2 месяца назад

If you're having "massive leaks", its probably not something RTV can fix and you may have a bigger issue.

@frankpizzileo794 10 месяцев назад

Great video as always. I have a stock mustang 289 C-code and going to put on new steel chrome valve covers. I’d like to use the load spreaders you show in the video, but not sure if I should use the stock length bolt. I know you use slightly longer ones, but not sure which ones. Any chance you could provide a part number for the slightly longer bolts? I guess I could remove a bolt, and head down to the hardware store to get one that is slightly longer. Also, is there anything obvious (other than cleaning things) that I should do while valve covers are off? I have a engine tick, should I bother trying to diagnose that?

@AlfsMustangGarage 10 месяцев назад

Well taking a bolt with me to the hardware store is exactly what i did! Nothing wrong with that at all. Other than just checking for any loose rockers. If you have a ticking noise, that is a thing you should figure out. Problem with noises, is they can be very tricky to locate. Lifters, exhaust leaks, valves, timing chains, all these things can be responsible. Try to narrow down the location from side to side and front to back.