How to Install your Timing Chain - Rebuild the 289 Ford - Part 7

Подписаться 11 тыс.

Просмотров 9 тыс.

50% 1

Today at Alf's Mustang Garage we install the timing chain and gearset on our 289 Ford rebuild.
The book I recommend you buy for your build. You will not get all the information there is to know from watching these videos. This book will help guide you through everything. www.npdlink.com/product/book-...
Check out Alf's Mustang Parts on Amazon www.amazon.com/shops/mustangalf
Things I used in this video.
As an Amazon Associate I earn from qualifying purchases
Timing Chain set amzn.to/3TlKvTt
Engine assembly lube amzn.to/3JomXKr
Lucas break-in oil amzn.to/3JOJGiA
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
Basic mechanics tool set amzn.to/3ob7q2B
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments below. What kind of project are you working on? What Mustang are you daily driving?
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.

Авто/Мото

Опубликовано:

24 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@alwayslearning8365 Год назад

Good tutorial. Thank you. 👍👍

@AlfsMustangGarage Год назад

You're very welcome

@nunyabiznez3584 Год назад

Thanks again for this series. It is greatly appreciated!👍👍👍

@AlfsMustangGarage Год назад

You're very welcome

@joshgsx Год назад

Alf, Can't wait to see the first fire up.

@AlfsMustangGarage Год назад

Same here!

@eltonlacey-ck1uw Год назад

I' just found your app an I've enjoyed learning frm u as much as anyone, tks 4 th help.

@AlfsMustangGarage Год назад

You're very welcome!

@miketinal5529 Год назад

This is a great series. I'm pulling the engine on my 66 in a few weeks and plan on rebuilding it while a frame rail is being replaced. Love how you do it stock.!

@AlfsMustangGarage Год назад

Oh awesome thank you!

@user-by2ti2up4j 11 месяцев назад

I didn't know that piece of metal is an oil slinger. I better try to find mine before I put my timing chain cover back on. Thanks for the tip!

@AlfsMustangGarage 10 месяцев назад

You're very welcome.

@danimal0826 Год назад

Great stuff!

@AlfsMustangGarage Год назад

Thank you

@jaustill237 Год назад

Im almost at this step. When i do get there, im copying this to the T.

@AlfsMustangGarage Год назад

Very cool. Did you invest in the book to further help you?

@browntacks708 Год назад

Good stuff & thx😎👍

@AlfsMustangGarage Год назад

You're very welcome

@justincummings4260 Год назад

👍

@AlfsMustangGarage Год назад

👍

@hutarajbhattarai4026 Месяц назад

🙏🙏🙏🙏

@hughphillips67Mustang Год назад

Off topic (again). 1- 289 runs perfectly. It will set there and idle all day long. As soon as it's put into gear, it dies. Simple carb adjustment? 2- oil pressure goes up like normal. (About half way up the guage). The longer it runs, the pressure slowly goes down. Normal? Oil pressure sending unit?

@AlfsMustangGarage Год назад

1- could be a carb adjustment. What is your engine vacuum readings? What carb are you using? What's the fuel pressure at? 2- very normal for oil pressure to decrease with engine temp increase. The cold oil is thick and thus has a higher pressure reading. As the oil heats up, it thins out. Question is how low is it going?

@hughphillips67Mustang Год назад

@@AlfsMustangGarage everything is original on the 289. And I have no clue what any of the readings are. I don't have the tools to test them. That's why I went to the expert......😉 If the oil temp guage was the gas guage.......I would say it was down to 1/8th of a tank when I shut it off. The oil is new. And full. With a new filter.

@AlfsMustangGarage Год назад

Oh ya thanks, I definitely don't know everything. I usually rely on my tools to take readings and tests and things like that to diagnose.

@hughphillips67Mustang Год назад

@Alf's Mustang Garage its hard to diagnose in person. Little lone on line. I get it. I was just wanting pointed in the right direction.

@AlfsMustangGarage Год назад

Ya I think if that were in the shop, the first thing I would be doing is checking the engine vacuum at idle. Pretty inexpensive tool to invest in. You'll use that to dial in the idle air mixture screws on the carburetor too.

@geoffreytoomey682 5 месяцев назад

Thanks, Alf, My 1976 F100, 302, a month ago after stopping at the shop when I began to drive one mile home it suddenly began popping as if the plug leads had been swapped over, I had been replacing most of the electrical parts and put a carby kit in the carby that was not a problem, I just tried with my Carenter brain again to finger it out, with Number one at tdc, the timing marks on the harmonic balancer were now were to be seen, and when I did get them to tdc the piston was not there so I protected the balance around until they were at TDC but the piston was about halfway up, that's when I found your timing change video , so I'll disassemble the front of the engine and have a look,

@user-su5fb4wx8s 10 месяцев назад

Hello, please tell me a Ford Mustang GT 500 with a volume of 7 liters, the engine gets very hot up to 110c, what could be the reason?

@MrBigal123123 Год назад

Hi Alf, I finally got the 289 running in the 65 mustang but im getting a little too much blowby. but i have a 1980 302 bottom end i was thinking of using. my question is can i use the timing cover and water pump from the 289 which is counter clockwise on the 302 so i can use the same radiator?

@AlfsMustangGarage Год назад

You know, I'm not 100% sure. I want to say yes but at the end of the day, I would just mock it up and see how it does. Will probably bolt right up but you'll want to make sure your timing chain clears and all that fun stuff. I hope that helps.