No video :(

How to Measure and Shim Your Tremec T56 Performance Clutch (For Camaro and LS Swaps)

Подписаться 63 тыс.

Просмотров 23 тыс.

50% 1

You're taking a big risk if you don't check this! Your new race clutch might require a shim to ensure correct throwout bearing travel and operation, here's how to make sure before bolting your transmission to the engine.
My Digital Caliper: amzn.to/3gOhluo (affiliate link)
If your new performance clutch needs a shim and you put it together without running one, your clutch may not engage or disengage (if you're lucky). If you're unlucky, your clutch may only partially engage, which robs holding power, gives clutch slip, and can overheat and ruin your clutch if left unresolved. Save yourself a lot of time and headache by taking a few minutes to do these measurements during assembly to ensure your setup is rock solid!
In this video I demonstrate how to measure the clutch and slave cylinder engagement on a Chevrolet Camaro LS Engine / Tremec T56 transmission to ensure that my Monster Clutch SC Series 6 puck racing clutch can hold the 700 wheel horse power it claims to and have a long life!
Join the Kame Trick Crew:
Twitch at: / kametrick
Discord: / discord
Instagram: goo.gl/EFggGc
RU-vid: goo.gl/S2o8sW
Facebook: goo.gl/NCjEAh
---------What to Watch Next---------
**Is Sim Drifting Realistic?**
10 Drift Techniques IRL vs in Simulator: • Drifting Techniques: 1...
IRL Drifter vs Fanatec Simulator: • Is Assetto Corsa Drift...
**Sim Drift Car Reviews**
20 Valve 4AGE Turbo Corolla: • 4AG 20 Valve TURBO?! A...
R34 Skyline 4-Door: • 4 Door Drift! R34 Skyl...
KA24DE 240SX: • Assetto Corsa Drift Re...
Silvia S13: • The MOST REALISTIC Ebi...
**Sim Touge Runs**
Sil80 vs Akagi: • Sil80 vs Akagi! (Eurob...
Impreza 22B vs Haruna Grid: • STOCK vs TUNED: Subaru...
**How to Get into Sim Drifting**
Set up Assetto Corsa: • Sim Drifting - How to ...
Install Content Manager: • Assetto Corsa Drifting...
Bind your Sim Hardware: • Assetto Corsa Drifting...
Install Custom Shaders Patch Mod: • Sim Drifting - How to ...
Install SOL Mod: • Unlock NIGHT DRIFTING ...
Find the Best Servers and Mods: • How to Find The BEST A...
Troubleshoot Common Issues: • Assetto Corsa Mods - T...
**Real Life Drifting**
Dry Tandems: • Grassroots Tandem Drif...
Rain Tandems: • Rain Tandem Drifts! (1...
Street Style Drift: • Big Steering Angle Kit...
Stock Angle Rain Drift: • Rain Drifting a KA24E ...
Truck Rain Drift: • TRUCK DRIFTING! Gettin...
**Real Life Matsuri Drifting**
No Coast Drift Party 2019: • Is it really a No Coas...
No Coast Drift Party 2018: • No Coast Drift Party 8...
Lone Star Drift 2018: • Lone Star Drift SHREDD...
Super D Matsuri - Day: • Super D Matsuri: Spiri...
Super D Matsuri - Night: • Super D Matsuri: Spiri...
LowStyle Heroes - Part 1: • Low Style Heroes: Behi...
LowStyle Heroes - Part 2: • Low Style Heroes: Drif...
LowStyle Heroes - Part 3: • Abo Moon Tandem Drifti...
LowStyle Heroes - Part 4: • "Style Kings" Forrest ...
**Support the Channel!**
Donate: streamelements...
**Great Sim Hardware for Drifting (Affiliate links to Support the Channel)**
Thrustmaster Wheel and Pedal Kits:
TX: amzn.to/2Om08tS
T300: amzn.to/3b8tO7q
Fanatec Wheel and Pedal Kits:
CSL Elite: fanatec.com/us...
ClubSport: fanatec.com/us...
Shifters, Handbrakes and Accessories:
Thrustmaster Shifter: amzn.to/395onV4
Fanatec Shifter: fanatec.com/us...
Fanatec Handbrake: fanatec.com/us...
Fanatec Xbox Wheel Adapter Hub: fanatec.com/us...
Load Cell pedals for CSL Elite: fanatec.com/us...
Fanatec ClubSport V3 Pedals: fanatec.com/us...
#Drifting #Racing #SimDrifting

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@KameTrick 3 года назад

Street vs Race Clutches: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R9OEaCWtpZI.html How Your Clutch Works: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SHpABM5E7sY.html

@442jetmech Год назад

I wish all of RU-vid was like this. Great video, calm and concise. Thanks man

@KameTrick Год назад

WHAT’S UP GUYS!!! TODAY WE’RE…. 😆 yeah I totally agree, haha. But it’s all good, I’m happy to make that style of content for the peeps who want to hang and learn with someone a little more chill ✌🏻

@SINSTER7THREE 2 года назад

Excellent video , very well explained. I’m in the process of a Magnum F swap and need to make sure everything is within spec. Thanks

@KameTrick 2 года назад

Ooh nice! I’m glad the video helped, it took me a while to figure out what I needed to measure from the text & diagram on Monster Clutch & Tick Performance’s pages so I wanted to make a little easier to understand version 🙏🏻

@joyroc885 Год назад

Thanks for the great info. My measurement from the throwout bearing to the housing wasn't adding up. I looked and looked for reasons why and couldn't find any until I found your channel. Some reason I didn't think the release bearing looked right and soon as you said you may have to move the bleeder screw I was like thats it. LOL I bet that is my issue and it was.

@KameTrick Год назад

Heck yeah, I’m stoked to hear this helped you out. I made this video to be the one I wished I’d had when I did my LS clutch install so this sort of feedback is all I could for on this vid 🙌🏻

@BlueMonster-co7ib 2 года назад

Thanks I was wondering about the bolts. Great video

@KameTrick 2 года назад

Yeah, happy to help!

@ejguitar5452 3 года назад

Thank you for this video, exactly what I was looking for! Super helpful. Just found your channel and just looking through it for a couple seconds I’m gonna love your content.

@KameTrick 3 года назад

I’m glad I could help! I need to post this to a few forums, I honestly made it because I wished there had been a video like it when I was shimming my own clutch a month ago 😆

@ejguitar5452 3 года назад

@@KameTrick Absolutely you should! I’ve actually been looking for a couple weeks now for a video like yours, and of course it gets recommended when I’m out of town and unable to work on it :/ I’ve been getting into AC drifting a lot more recently with a vr headset so your channel is perfect for me :)

@KameTrick 3 года назад

@@ejguitar5452 oh yeah, there’s heaps of stuff for AC fans 👌🏻 Good luck on your projects 🔧

@JohnSmith-bn7bl Год назад

very informative and to the point, thank you... nice shim, didnt know monster supplies those. hopefully i wont need one when i do my monster clutch install.

@KameTrick Год назад

Glad I could help, just made the video I wished was online when I was doing my project haha

@kmsdaily 3 года назад

Super informative and high quality. Always improving Kame

@qnitroz 2 года назад

great video appreciate you putting this up

@KameTrick 2 года назад

Thank you! I really just tried to make the video I wished I’d had when I was looking into how to make sure my clutch install wouldn’t have any issues...and then I made that 🙌🏻

@israelcolazo6378 2 года назад

How much was your total shim amount

@fasnuf 2 года назад

Awesome sir, thank you

@diambo4life Год назад

One thing I didn't understand is why are you removing the spring to get the measurement? The TOB while functioning would never get that low because the spring is in it. So essentially, you are tryin to accomodate for tolerance that isn't there. Why not use a vice and compress the TOB to it's maximum position?

@chamberlainspeed2270 11 месяцев назад

Yes it does get that low with the spring installed. Just easier to get a measurement without fighting a spring

@dodahricky1 10 месяцев назад

Question? In measurement A, you subtracted the width of the object. Do you also have to subtract it from measurement B?

@catfissh 7 месяцев назад

Sure do!

@red666A Год назад

what sizes are slave cylinder bolt?

@misterbulger Год назад

My t45 doesnt have a removeable bellhousing... 😢

@KameTrick Год назад

Either the monster clutch or tick performance website has directions for units with non-removable bellhousings, FWIW, I just don’t own one so I can’t make a video on that process

@jaystepp150 10 месяцев назад

How’s about we just use a few washers?

@KameTrick 10 месяцев назад

That should work fine, as long as they don’t allow the cylinder to shift side to side or twist when applying pressure to the clutch diaphragm spring…not sure how likely that is but a washer shim works well in plenty of other areas.

@jaystepp150 10 месяцев назад

@@KameTrickif my measurements are correct I’m off by .600, does that sound correct? Do they make a sim that size? I pulled my transmission to send out to have synchronizer for second gear fixed. Found a monster triple disc clutch hiding in there. I didn’t measure before sending the tranny off but now I’m finding this gap.

@hypedforhandbrakes7185 3 года назад

away to do my e46 clutch and flywheel soon but in doubts as too buy stage 2 or stage 3. im thinking stage 3 would last longer but be harder too drive daily. and stage 2 is pretty much the same price as stage 3 depending on brand. shud i just go all out for stage 3 or just get stage 2? car is only 180bhp but i wanna abuse it without needing too keep spending 300 bucks a time x

@KameTrick 3 года назад

The main thing is to get something rated for the power you think the car will be making in the next year or two. No need for a stage 3 if you make 180hp, unless you are certain you’ll be adding a lot more fairly quickly!

@hypedforhandbrakes7185 3 года назад

@@KameTrick so no difference in life span between the 2? just purely power rating? i just want it too be strong and last really x

@KameTrick 3 года назад

@@hypedforhandbrakes7185 I don’t know for sure, depends on several factors, but I wouldn’t worry about it other than matching power level and going with a reputable brand for your application 🤙🏻

@hypedforhandbrakes7185 3 года назад

@@KameTrick its a black diamond stage 2 kevlar 335gbp or drivetorque stage 3 370gbp this is my puzzle x

@KameTrick 3 года назад

@@hypedforhandbrakes7185 I think either will do a good job for you 💪🏻

@geulach 3 года назад

@2:47 you're doing it so wrong its painful to watch

@KameTrick 3 года назад

Thanks for watching-regarding doing it wrong, do you you mean cause the ruler isn’t perfectly flat against the caliper? I noticed that while editing, but didn’t when filming, because I was looking at the tiny camera screen to frame up the shot 🤷🏻‍♂️

@hypedforhandbrakes7185 3 года назад

knob xx

@geulach 3 года назад

@@KameTrick yes, that being at an angle, and usually calipers have a gap between them on top section which is always there and isnt used for measuring like that.

@KameTrick 3 года назад

@@geulach ah I see what you mean. This is my only caliper set (www.amazon.com/Neiko-01407A-Electronic-Digital-Stainless/dp/B000GSLKIW) and it’s top section is flat all the way across. Looking closer the bottom may have a slight difference, though. I did a proper job measuring when actually performing the process but guess I got lazy when talking it through to the camera. 😅 Thanks for holding me to a high standard, I’ll remember that next time I shoot a tutorial video with caliper measurements ✌🏻