HOW TO PUT INTUITION LINERS ON A THE SEBA WIZARD SETUP 

Good job lino on the mods, wish more people would do stuff like this. 👏👊

Great video! I enjoyed the way you showed how you did it and the fun you had, and when it was challenging. I look forward to your next video about your adventure with your new wizard setup.

Sweet setup Ricardo! ✊🏽🔥

Absolutely love this. I've saved this video in my mind for the day my intuitionlinrs would finaly arrive. And right now im cutting my Seba's due to the courage i got off your video thank you so much

The feel when you put together a skate that fit perfectly! I loved how happy you looked when it finally did it! ^^

They look great Lino, looking forward to seeing how you like skating in them!

Terrific! 🔥

Ive seen this specific video with so much interest as my setup has arrived two weeks ago and I had the same experience as you so more probably I have to remove that insole that is sticked to the boot in order to have much more space. I have the wiked ILQ9 Pro with UC blank 100 mm wheels.

They look sick!!! Very tempted to spray my CJs now. Looking forward to seeing Gazelles from Africa

This video had me looking out the window for a truck.

Dear Ricardo! Love to watch ur vids. They are truly helpfull to a noob like me. I know its an old video but i got an important question. I got the Seba carbon shell (linerless) in 46 EU and the Intuition liner in XL and i didnt molded it yet (like i have to recording to your vid :) BUT i tried to put the liner into the boot in nearly every way i could think of and it seems it doesnt fit correctly. i got wrinkels above my liddle to middle toe in the toebox and a wrinkle beneath my inner ankle that i cant get rid of. Also when I look at the shoes from above the tongue doesnt seem line up correctly with the boot and i cant get it right. I am kind of frustrated because the setup wasnt exactly cheap and i waited for them about 3,5 month to arrive from NY due to corona. i was excited like a little kid when they arrived and now this. I tried to skate them a little bit but it starts to hurt (quite bad) after about 20 min. I get the impression they put the wrong linersize inside the boot but i dont want to missjudge the sellers. Also i am kind of embarrased because i am quite new to skating (did it 15y ago hockey and now again for about a year) and went directly for the "best" (most expensive) setup. My hope is that, if i am molding them, the discribed Problems will solve themselfes but kind of not believing in it because i dont think molding will shrink them to fit correctly. I tought of just buying a smaller liner but, as u mentionted they are not exactly cheap and i am afraid then the liner will be to small (i got 46-47 EU). Also i would be quite upset with the sellers in this case because.. yeah i already payed for a theoraticly "best" setup. I just want to make sure their isnt anything i can do (or i am doing wrong due to missing knowledge) before getting really upset with the sellers. Sry for the long Post. Rlly looking forward to any tips helping me solving the problem. Thx 4 all the contend. u got a rlly lovly familiy there pal. Love Max (Vienna)

wow - nice job! Do you think it is worth trying to do smth similar with PS ulrton? (the skate is good but the ankle area is giving me hell, thought it would be more comfy if i put some liner in)

Hey man i watched this video through yesterday and have that song while you are working stuck in my head haha what is it called?! Great video as always man!!

How did you paint this Seba SX? They are pretty nice.

pretty good with that blade!

Defiantly looking forward to seeing you skate this set up. Hats off to the mods :D

Lino shout out from Panama... What size cj boot and what size intuition liner?

Can you try these with the GC 125 and compare it to a dedicated plastic 125 (like the Next you have) ?

Good stuff mate. Want to try free skates but as I’m 6ft4 I would be basically hagrid with wheels bigger then 60mm haha

Any advice for spraypainting these black?

Very good video brother

hey Ricardo, you think I can do this to my deshi carbon?

witch size should I take, If I want to put in the Intuition Liner? Same size or one size bigger /smaler?

Can I do it with Seba High Light v2?

duuuuude those skates are sick! Probably $1200 setup. Awesome work man

nice mod. hope it skates well.

im going to just press like once cuz i was hoping to see you skate on this

What size is the skate and what size is the liner ? Thanks

This was the scariest thing i did to my skates....i didn't have money to buy another pair of skate and the inside foam of the SX was getting ripped from the ankle area and i didn't want to lose the SX so i got the Intuition liner and spent days researching hot to gut it and i gotta say it was easier than what i expected. Since i was used to the SX being a bit loose, riding with the Intuition at first was like hell....too tight and lots of pressure points....Now, 3 months after using it daily, i got to a point where the fit is right and my god it is amazing the feeling of thin foam but also being tight enough to keep it solid without too much lateral flex....even riding aggressive setup it feels more responsive. I guess the Hardcore Evo have a similar fit, right? From what i've seen it's a bit thin compared to the SX.

Can you share sizing boots and liner

Try the MyFit skinny boy liners in the Seba boot? Let me know how it fits.

What size was the boot and foot size or did I miss it?

Ooooooooo dude ... that hurts. Even so, it's a good video.😉🙏

Nice one. .. i engoy this video. .. becoase is fun. ....

Thumb up for the manual work

Man! you are crazy!!! But it ends up really good. Curious, how would you say "Eat heat food"? hehehehehehe just kidding.

What happened with the usd carbon that you mentioned at the beggining of the video? :s you didn't looked very enthusiastic about it and I'm about to do that hahahaaha I completely LOVE your channel and I've been learning a lot thank you, greetings from Chile :D

I can go to the intution store any day cause I live were they are located

It would be cool if the industry started to produce higher duro for large wheels - 88a is max what i can get for 100+ wheels, i realy like stone hard wheels

Hey ! Great video, now I can see how it could be working ! I saw you were using size M Intuitions, but what about the seba Cj boot size? My feet measures around 27,2cm and I'm using the M Intuitions aswell, but I don't know what seba carbon boot I should use ! Thank you :)

What hat is that you're wearing and where can I get one?!?

Bonjour j’aime bien le roller

Is that a retractable butter knife? Cuts like one lol.

Looks good. Since you are in the same factory where Seba SX are made, could you not ask the factory what they do for the linerless SX they provide to Shop Task etc? I think many people (including me) want to do this mod but are scared they might remove something important!

Aaawsooome :)

Hi Ricardo. I see that you spray paint skates and other parts quite frequently. Have you ever spray painted a liner? I have an old Intuition gone brown/green (used to be gold) and would want to have it black. Any experience with that? Maybe using dye? Happy three years of marriage btw! All the best!

This what I call Engineering XD

Hello Ricardo, This is Samuel From Germany. Im so excited about this and really pleading, to get the Seba cj or sx with intuition liner. But they don´t sell in europe. If there is any way to purchase and ship it to germany i would be sooooooo freaking excited. Offcourse i would pay all the shipment coasts to make it possible. Yours Samuel Vollmert

this episode somehow oddly reminds me of border control xD

@Ricardo Lino duuuuuddddeee these are so sick!! Thanks for uploading this video and all the others you do. They’ve definitely got this old rollerblader out of a 10 year retirement! I’ve just bought some Seba SX, some Seba Carbon CJ’s and the intuition liners so this video is my guide to finally building my own wizards 🧙‍♂️ The only thing I’m trying to get hold of is some Wizard NR100s but I can’t find them anywhere in the world at the moment, it’s like they don’t exist 😫 (they won’t be built and ready by Wizard skate until June from what the website says) If you or any of the other subscribers know where I can get hold of some for delivery to the UK please let me know. All the best with the channel and keep on rollingggg

No entraban sin cortar?

Hola Ricardo

Maybe a Dremel will make it mor easier

C’est combien?

These look like Seba SX 2 2018/2019 They're made out of plastic not carbon.... And they are being sold in linerless version so gutting the boot is pointless.

The easiest way to do this is to remove the skin and liner completely and then remove the foam from behind the fabric liner and re glue it down. I always cringe watching people remove the foam this way but I understand why people do it since there aren't any good tutorials

Dude why don’t you just reach out to Leon about how he set up his “CJ intuition wizard setup” idk I think it would be better to get the info before butchering the skates first then asking

but why?

You did nt have any more space. . !!!!!!!!!

That's so stupid: A boot that Costs over 400€ and the Liner ist not removable. If they will have removable liners in Future I might buy a pair but Not If It IS Like that!

Don't try this at home 🤣

I like how you always draaaaag your videos before you get to the point. SMH

What were you smoking? Why ruin a perfectly good pair of skates? These intuition liners are designed to be used in skates that already have removable liners. If you must use these liners why not just buy a boot with no liner?