HOW TO REGEAR A SUPERDUTY DANA 60 (part 2) - Project Maple Leaf Jeep Build (no. 12)

Подписаться 15 тыс.

Просмотров 3,8 тыс.

50% 1

Learn how to regear a Ford Superduty Dana 60 in this video series. Part 2 will show you how to set up pinion depth, pinion bearing preload, and how to reinstall the pinion into the axle housing.
Please SUBSCRIBE to show your support! It’s FREE and allows ne to continue building things to provide you guys with good content and work toward the vehicle giveaways!
Check out my website to see the brands I choose to support!
WarPaintoffroad.com
LINKS:
IMPACT GUN
www.amazon.com/dp/B01MCQ5VO1?...
TORQUE WRENCH
www.amazon.com/dp/B07MKSJ4SG?...
GLOVES
www.amazon.com/dp/B0001VNZQY?...
CLAMSHELL BEARING REMOVER
www.amazon.com/dp/B09724XFZ9?...
GRINDER
www.amazon.com/dp/B09F9PL2MD?...
FLAP DISK
www.amazon.com/dp/B01D0HIIJE?...
DREMEL
www.amazon.com/dp/B077Y86FKJ?...
DIGITAL CALIPERS
www.amazon.com/dp/B000GSLKIW?...
SHOP PRESS
www.amazon.com/dp/B000HD6G7G?...
TORCH
www.amazon.com/dp/B09PMX9J7D?...
INCH POUND TORQUE WRENCH
www.amazon.com/dp/B01FMXEWQC?...
BEARING DRIVER SET
www.amazon.com/dp/B076HQMJKC?...
***Disclaimer*** This video is just meant to show how I do it. Injury may occur by trying to replicate what is in this video. Attempt at your own risk, with proper equipment and training.

Авто/Мото

Опубликовано:

12 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@BuildItWheelItExploreIt 4 месяца назад

Man this is the exact video I was looking for! Super helpful! Im about to setup a Super Duty Dana 60 for the 1st time ever, I have all the appropriate tools needed. But understanding the shims etc was confusing. I like the idea of not using any shims under the inner bearing. That seems like the way to go.

@WarPaintOffroad 4 месяца назад

Heck yea! Let me know if you have any questions.

@BuildItWheelItExploreIt 4 месяца назад

@WarPaintOffroad appreciate it! So I've torn down two factory untouched 05+ Dana 60 HPs from super duties. Neither had those large oil slingers behind the head of the pinion and inner bearing. So I assume most shops use a standard shim the same thickness there. Or do what you're saying and don't run any shims there and put them all in the outer stack.

@Offroad_Josh 10 месяцев назад

Best explanation video!

@brandonbradford630 Год назад

keep em coming

@WarPaintOffroad Год назад

Thanks for the support! It’s going to get really good pretty soon!

@mrbrettdimarco Год назад

Looking good man 🥳

@WarPaintOffroad Год назад

Thanks buddy! We are getting there. The suspension and stuff which I’ll start putting out soon will make some really good content.

@mrbrettdimarco Год назад

@@WarPaintOffroad yeah it will for sure!

@Centex_jeeper Год назад

Great stuff man 🤘🏼

@WarPaintOffroad Год назад

Thanks for the support!

@zxtuner4lyfe Год назад

been following your video as a guide somewhat. just realized i didnt use the pinion oil slinger and neither did you? now i have to go redo this. why?

@WarPaintOffroad Год назад

The Dana Superduty 60 doesn’t have one from the factory.

@vincentmamotos9937 Год назад

can you use the dremel to sand down the race as well?

@WarPaintOffroad Год назад

To make a set up race..sure. It might take a bit longer. I just use a flap wheel in my grinder. Makes pretty quick work of it.

@vincentmamotos9937 Год назад

@@WarPaintOffroad thanks. I've been doing alot of studying and prep work for doing regear myself. The more I watch and study, the more I'm convinced that anyone should do it. It's just tedious. And most people want a 1 day turnaround. How the yukon gear holding up?

@zxtuner4lyfe Год назад

been following your video as a guide somewhat. just realized i didnt use the pinion oil slinger and neither did you? now i have to go redo this. why?