Тёмный

HOW To Remove Peeling CLEAR COAT on Wheels/Rims...FAST ! 

Sweet Project Cars
Подписаться 493 тыс.
Просмотров 240 тыс.
50% 1

DONT BUY NEW RIMS...Remove the clear from any wheel then shine it up, then reclear it if you like. A simple way to recondition your wheels.
Hello Everyone, SWEET PROJECT CARS here with cool, trick and affordable ways to do things for the DIYER'S OF THE UNIVERSE!
USA Tools:
Paint Brushes amzn.to/2iyyvxJ
Mothers amzn.to/2C18A9Z
Micro-Fiber amzn.to/2yTPhgR
Paint Stripper amzn.to/3I1zp2m
Power Washer amzn.to/2hFCRSY
Venom Gloves amzn.to/2B8kLBh
Disclaimer:
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Sweet Project Cars may be compensated for sharing links. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this RU-vid channel, Face book page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Авто/Мото

Опубликовано:

 

26 окт 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 240   
@richarddelaney9654
@richarddelaney9654 7 лет назад
Quick...Intelligent....and to the point. It doesnt get any better. Especially when it saves you a ton of time and money over sandblasting that stuff off. Thanks Sweet!
@SweetProjectCars
@SweetProjectCars 7 лет назад
Thank you Richard :)
@oregonian1966
@oregonian1966 7 лет назад
This is great. Just the tutorial I was looking for. Thanks so much!
@SweetProjectCars
@SweetProjectCars 7 лет назад
Thank you 1966 :)
@wraithconscience
@wraithconscience 4 года назад
Again! I'm randomly searching for a video on aluminum rim cleaning and clear coat. I click, and what do I hear? MIke's voice! SPC to the rescue AGAIN! You're like totally better than the bat cave! God bless!
@SweetProjectCars
@SweetProjectCars 4 года назад
Lol.... I'm everywhere :) Thanks for the comment and as always for being here with us, we truly appreciate it! God bless you too. mad Mike the hammer SPC
@HeidiPyke
@HeidiPyke 5 лет назад
You’re amazing. Thanks!
@timbo713
@timbo713 3 года назад
Awesome job !!!👍you have some awesome tips and tricks , learnin a lot from you bud . Keep doin what your doin👍👍
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad to help Tim! Thanks so much for the view and comment, have a fantastic weekend my friend. mad Mike the hammer SPC
@smithboy08
@smithboy08 3 года назад
Excellent idea. I have some heavily corroded rims off a 2009 Ford Ranger. Now it appears a lot of this is trapped just under the clear coat. Great suggestion to use paint stripper. Cheers!
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad to help Dan! Thanks for watching. Have a great day. mad Mike the hammer SPC
@lesterwentworth4502
@lesterwentworth4502 7 лет назад
I'm going to try it one of the best ways I've seen so far thanks
@SweetProjectCars
@SweetProjectCars 7 лет назад
thanks much
@itsJohnnyDill
@itsJohnnyDill 7 лет назад
This is outstanding. I have a 2001 Town Car with similar wheel issues. Gonna strip 'em & polish. Thanks for the great video. :-)
@224chingon
@224chingon 4 года назад
Anybody think watching how gently he rubs the clear coat off with the brush is very satisfying?
@SweetProjectCars
@SweetProjectCars 4 года назад
It is very satisfying no doubt about it
@andrewjohnson750
@andrewjohnson750 4 месяца назад
Oh yes less mess than nitromos , unfortunately am in the uk and never heard of hes product.
@AllEyezOnRod
@AllEyezOnRod 4 месяца назад
But aren’t you supposed to spray rim with clear coat afterwards
@jimmysegovia2688
@jimmysegovia2688 3 года назад
Very nice 👌 thank you for sharing you guys are the best!!!!.
@SweetProjectCars
@SweetProjectCars 3 года назад
Our pleasure! Thank you for watching and sharing my friend. Have a fantastic day. mad Mike the hammer SPC
@thearrow5793
@thearrow5793 7 лет назад
Cooooool man............. I love that....... brand new .........keep going👏👏👏👏👏👏
@TheCrash1987
@TheCrash1987 5 месяцев назад
Good idea, thanks man!
@skellatore7498
@skellatore7498 7 лет назад
Thank you for all your vids, you are great.
@SweetProjectCars
@SweetProjectCars 7 лет назад
thanks Skellator .....we have some good good stuff coming
@JohnMalik
@JohnMalik 2 года назад
Good stuff, Mike. My 83 944 is going to get this treatment very soon.
@SweetProjectCars
@SweetProjectCars 2 года назад
Nice! Thanks John, we appreciate the view and comment, have a great weekend my friend. mad Mike the hammer SPC
@crsuperman1
@crsuperman1 7 лет назад
thanks. nice trick
@martinking4476
@martinking4476 3 года назад
Omg you have just saved me hours of sanding thank you making this video straight to the point
@SweetProjectCars
@SweetProjectCars 3 года назад
Our pleasure Martin! Glad to have you here with us! Have a fantastic day. mad Mike the hammer SPC
@NKPGarage
@NKPGarage Год назад
That looks WAY easier than I thought it would be. About to do exactly as you described on my Hummer H1 wheels.
@SweetProjectCars
@SweetProjectCars Год назад
Awesome! Thank you for watching and sharing, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@NKPGarage
@NKPGarage Год назад
@@SweetProjectCars thanks 🙏 keep up the great work on the videos and best of luck!
@vijunshiji1
@vijunshiji1 7 лет назад
really informative....good going and thanks brother
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you Angel
@robertboyd7784
@robertboyd7784 7 лет назад
thanks, good informative video. I wouldn't put clear on them again though. Just a good metal polish every month or two to keep them looking schmick.
@SweetProjectCars
@SweetProjectCars 7 лет назад
there you go :)
@joshbourassa1860
@joshbourassa1860 7 лет назад
learning lots thanks for sharing!
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you josh :)
@jaimejay6056
@jaimejay6056 3 года назад
Thanks man. I have been searching for hours. Aircraft paint stripper. Got it.
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad you liked it. Thanks for watching. Have a great day. mad Mike the hammer SPC
@eileenmcclelland4994
@eileenmcclelland4994 3 месяца назад
@@SweetProjectCars Hiya, what could you use instead of the aircraft paint stripper? Can't seem to find it anywhere
@alexhern9695
@alexhern9695 6 лет назад
WARNING! Use gloves, cover your skin with a long sleeve, protect your face and use safety glasses. I recommend a clear safety mask. If you get any of this stuff on any area of your skin it will burn. Do not allow anyone or pets near this stuff. I used it and yes it does work. It removed the clear coat and the silver paint as well but it brought it back to life. My rims look very clean and shiny.
@SweetProjectCars
@SweetProjectCars 6 лет назад
alex hern thank you for sharing :)
@etripp111
@etripp111 6 лет назад
You are amazing man!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Thank you Eddie we truly appreciate that more than you know it makes it all worth it for all the time and effort it takes to do these videos have a great day my friend
@kashiomodashio6455
@kashiomodashio6455 3 года назад
Great video! What product would you recommend that's just as effective as the blue bear 605 that I can buy locally?
@SweetProjectCars
@SweetProjectCars 3 года назад
Our videos are very product/tools specific, if you want the same results we show, use exactly what is in the SHOW MORE product/tools list. Thanks for watching. mad Mike the hammer SPC
@jamesdewer
@jamesdewer 26 дней назад
THANK YOU!
@SweetProjectCars
@SweetProjectCars 10 дней назад
Our pleasure! Thanks for watching and commenting, have a great week my friend. mad Mike & team
@mikekosloff6926
@mikekosloff6926 27 дней назад
Awesome thanks
@SweetProjectCars
@SweetProjectCars 10 дней назад
Our pleasure Mike! Thank you for the view, hope you have a fantastic week my friend. mad Mike & team
@robertocaparelli1600
@robertocaparelli1600 2 года назад
Good stuff ..gota try it and let you know.👍
@SweetProjectCars
@SweetProjectCars 2 года назад
Thank you, Roberto! We appreciate the view and comment, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@tonygarcia7805
@tonygarcia7805 4 года назад
Thank you..
@SweetProjectCars
@SweetProjectCars 4 года назад
you are very welcome tony
@ARPatriot1776Official
@ARPatriot1776Official Год назад
Super nice!
@SweetProjectCars
@SweetProjectCars Год назад
Glad you liked it! Thanks for watching, have a great weekend my friend. mad Mike the hammer SPC
@jasonvaughan5128
@jasonvaughan5128 Год назад
Hi What do I do about the black paint sections. The clear coat on my wheels is only on the face of the wheel? Great video by the way. Thanks.
@SweetProjectCars
@SweetProjectCars Год назад
Use this if you want to remove the paint, amzn.to/3I1zp2m There's no way to remove the clear coat on the unpainted section without affecting the painted section. You are going to have to strip the entire wheel and re-paint where needed. Thanks for watching jason, have a great day my friend. mad Mike the hammer SPC
@chrismccarty539
@chrismccarty539 Год назад
Great Video !! Thanks !! In your video you say you are using Rustoleum aircraft striper gel as well as spray. In your links you suggest using Blue Bear 605 Pro Coating Removal. Would you suggest the Blue Bear gel over the Rustoleum aircraft stripper gel ??
@SweetProjectCars
@SweetProjectCars Год назад
We use this amzn.to/2rjAPfo now Chris. Thank you for watching and asking, we really appreciate it, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@aquaticterrafirma
@aquaticterrafirma Год назад
@@SweetProjectCars that link came back to a scan tool. I had the same question as above.
@Mr-er6fg
@Mr-er6fg 5 месяцев назад
​@@aquaticterrafirmaYEAH ME TOO!
@silverback4616
@silverback4616 4 года назад
Hello....do you know where I can get that stripper spray..??? when I click on your link on a totally different product pops up...??? Thanks.
@ypfv8684
@ypfv8684 2 месяца назад
I bought 4 wheels that were painted black by the previous owner. Used this method to remove the black paint, and it took the clear coat off too. Is it necessary to apply a new clear coat now? Or can i run the wheels without it?
@datazndood
@datazndood 7 лет назад
I agree, brain over braun. I refinished my wheels and used orbital sander which was back breaking bending down putting all that pressure. Finally looked around and found strippers, chemicals that did all the hard work for me. Just have to be patient which is the next thing I am working on.
@SweetProjectCars
@SweetProjectCars 7 лет назад
thanks for sharing dojo
@ProtegeTuype
@ProtegeTuype 7 лет назад
Watching this is so satisfying
@SweetProjectCars
@SweetProjectCars 7 лет назад
Thank you Gil :)
@SweetProjectCars
@SweetProjectCars 7 лет назад
THANKS GIL :)
@austint.8425
@austint.8425 6 лет назад
gil zur ikr seeing the clear coat strip away sort of like peeling dead skin
@FrizzyNation
@FrizzyNation 3 года назад
Now using this method are there any oils in it that will effect it when painting or should I decrease them or just power washing will work? I’m looking to use this then paint them just wondering if I’ll get bubbles from any oils in the chemical
@SweetProjectCars
@SweetProjectCars 3 года назад
Use this amzn.to/3hsXZbJ prior to painting then you are guaranteed to not have any fish eyes or bubbling. Thanks for the question, have a great day. mad Mike the hammer SPC
@josh33025
@josh33025 2 года назад
Thanks I tried another brand of stripper but it wasn't getting all the clear off. I will try this stuff from rustoleum.
@SweetProjectCars
@SweetProjectCars 2 года назад
Glad to help josh33025! Thank you for watching and sharing, have a great day and all the best on your project. mad Mike the hammer SPC
@alb12345672
@alb12345672 6 лет назад
I have the exact same rims wow
@SweetProjectCars
@SweetProjectCars 6 лет назад
alb12345672 see our other videos on making them look good, we have many on wheel reconditioning :)
@bostonsirish1
@bostonsirish1 7 лет назад
nice!!! i got same rims same issue!!!! once sterile would you recommend applying a new THICK clearcoat finish ?
@SweetProjectCars
@SweetProjectCars 7 лет назад
you can, I preferred to just polish them up once in while, but clear coat will work as well
@bostonsirish1
@bostonsirish1 6 лет назад
Sweet Project Cars i just grabbed another Michelin symmetry tire to complete the set of 4 and now i will recondition the rims as you showed me!!! The fact that you demonstrated with the identical rims is amazing!! What are the odds!! Thanks again
@SteadyLifted
@SteadyLifted 3 года назад
Would using this method on rims that are partially painted be ok? I dont want to damage the nice painted parts but the clear on the chrome is peeling. I have a 1990 Indy Beretta
@SweetProjectCars
@SweetProjectCars 3 года назад
You will have to be careful no matter what you do as to not affect the paint. We recommend taping off the painted areas. Hope the helps. Have a great day. mad Mike the hammer SPC
@gusto8585
@gusto8585 21 день назад
If I live in the RUST belt should I clear coat after buffing so they dont Rust?
@ratrodrestorations5869
@ratrodrestorations5869 3 года назад
Wanting to do this to mg 06 Monte SS wheels, can I reclear them at home with some 2k clear?
@SweetProjectCars
@SweetProjectCars 3 года назад
Yes you can, but this goo.gl/Eqjnp3 is easier, faster and lasts way longer. Thanks for asking. Have a great day. mad Mike the hammer SPC
@bammbamm12
@bammbamm12 3 года назад
My rims have tangly, spidery, spaghetti like streaks all over the place on every wheel. It's definitely not from scratching. Any idea what that is, and the operation to repair?
@SweetProjectCars
@SweetProjectCars 3 года назад
Sounds like it's the clear coat deteriorating, you need to use this amzn.to/2H4NJHx and follow the process in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MziPmQWYr4w.html Thanks for asking. Have a great day. mad Mike the hammer SPC
@BruceMcKeever
@BruceMcKeever 7 лет назад
Will this work on wheels covered in brake dust? Or does that need removed first? also will the stripper hurt the tires? they need to be masked off?
@SweetProjectCars
@SweetProjectCars 7 лет назад
yes if the clear coat is still there brake dust comes off with it...will not hurt the tires...but then again there is no reason to get it on the tires in large quantities
@WavebiteDubstep
@WavebiteDubstep 2 года назад
Just a question, my rims clear coat are peeling off. I want to remove the clear coat and spray again but the rims are coloured black. Would this stuff remove both the clear coat and the underlying color paint? I got quoted $220 each rims to get fixed which I’m trying to avoid.
@SweetProjectCars
@SweetProjectCars 2 года назад
There's no way you are going to remove the clear and not remove the base paint as well my friend, you're going to have to strip them all the way down and repaint and reclear. Thank you for watching and asking, hope this helps, have a great weekend. mad Mike the hammer SPC
@caseytbss
@caseytbss 6 лет назад
So how well do they hold up and stay clean once this clear is off? Should a guy spray them again with a clear coat for wheels?
@SweetProjectCars
@SweetProjectCars 6 лет назад
Casey if you do it right per the video the clear will not come off as long as you keep the salt off them and care for them..thank you very much for the great comment it is truly appreciated. :)
@johndoe-ie1be
@johndoe-ie1be 3 года назад
Ive been working & working at stripping my wheels, exactly as you demonstrated, the clear coat on my wheels is very thick ! Help ! On my 4th coat of stripper, 2nd can, barely any clear coat is removed with each coat
@SweetProjectCars
@SweetProjectCars 3 года назад
John, you need to keep using stripper until it is all removed or have someone sandblast them for you. Sorry my friend. Hope this helps. Have a great day. mad Mike the hammer SPC
@johndoe-ie1be
@johndoe-ie1be 3 года назад
@@SweetProjectCars I used 3 cans on 2 wheels, i called around and apparently raceline uses a product called rock guard , like a plastic product - the more you apply the stripper the harder it gets :( , im sending the wheels to powdercoat. Spent 5 days on 2 wheels
@crazzypanda1176
@crazzypanda1176 5 лет назад
When you say “mothers” to remove the corroded areas what exactly is it that you used?
@SweetProjectCars
@SweetProjectCars 5 лет назад
crazzy if you look for the SHOW MORE of the videos description you will find all the tools my friend, to find the SHOW MORE on any of our videos see these static pictures as a guide photos.app.goo.gl/4fbqwpXC3Koqsv8o7 for a desktop computer or here photos.app.goo.gl/dY6Wz16qnroYHDsK6 for a cell phone
@markgreco8961
@markgreco8961 3 года назад
mothers aluminum & mag cleaner, walmart 5.50 ish
@gabrieltiso8537
@gabrieltiso8537 Год назад
Awesome video, was certain it was click bait and to my surprise it definitely wasn't! Since you're down to bare aluminum now how do you treat the wheels to keep them from pitting? Or did you shoot them with more clear coat?
@SweetProjectCars
@SweetProjectCars Год назад
Use either of these as options amzn.to/3lgx0W1 or goo.gl/z9TrgR also watch this update video on this process ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MfkcTtgXTTw.html Thank you for watching and asking Gabriel, hope you have a great week. mad Mike the hammer SPC
@gabrieltiso8537
@gabrieltiso8537 Год назад
@@SweetProjectCars thanks for getting back! Thought I'd be hand sanding the rest of the weekend. This is so much faster! We'll see how far I get with a two pack of the 2k. Subscribed!! 🤙
@xp3085
@xp3085 Год назад
So big question is.....can you paint the wheels rattle can style after this? Or should you still rough them up a bit? Thanks!
@SweetProjectCars
@SweetProjectCars Год назад
Yes you can paint them. Go over them with these amzn.to/3CgIcc0 then use this amzn.to/3CDjsw3 and then paint on painter! :) Thank you for watching and asking xp3085, have a fantastic day and all the best on your project my friend. mad Mike the hammer SPC
@stevejohnston3339
@stevejohnston3339 Год назад
What about reclearing do you still need to rough up?
@lungandfoot
@lungandfoot 5 лет назад
Is there a reason you suggest this particular paint stripper vs others? Is clear on wheels that difficult to get off with ordinary paint stripper?
@SweetProjectCars
@SweetProjectCars 5 лет назад
Yes this is the only thing Brian we have found that will work and some clearcoat can be a real bear to get off this makes mincemeat out of it in no time
@user-nr4sp1fb4u
@user-nr4sp1fb4u 4 месяца назад
Where can you buy the gel. I've looked everywhere for this exact kind
@jonathonwilson5998
@jonathonwilson5998 3 года назад
I have some Texas edition 20s, could I remove the clear coat on them
@SweetProjectCars
@SweetProjectCars 3 года назад
You sure can. Thanks for asking. mad Mike the hammer SPC
@mohammedbenz9361
@mohammedbenz9361 5 лет назад
I have a question, what’s the cons of removing the clearcoat off of this wheel. I have the same exact one on my MGM
@SweetProjectCars
@SweetProjectCars 5 лет назад
Mohammed Benz no cons on this my friend as you will then polish or repaint and reclear
@SweetProjectCars
@SweetProjectCars 5 лет назад
Mohammed Benz see this as well ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gxouiNX8JM0.html
@mohammedbenz9361
@mohammedbenz9361 5 лет назад
Sweet Project Cars Thank you for your help! I really appreciate it, greetings from saudi arabia👋🏻
@SweetProjectCars
@SweetProjectCars 5 лет назад
Mohammed Benz ahh nice and warm there i bet
@MrSurfcaster76
@MrSurfcaster76 7 лет назад
Nice video my friend.. what is mothers?
@ItsMeJbird
@ItsMeJbird 7 лет назад
metal polish
@MrSurfcaster76
@MrSurfcaster76 7 лет назад
Bandits INFO Channel thanks
@SweetProjectCars
@SweetProjectCars 7 лет назад
mothers polish you can buy most any auto store and or online ebay or amazon
@MrSurfcaster76
@MrSurfcaster76 7 лет назад
Sweet Project Cars thanks again, your videos are very informative
@SweetProjectCars
@SweetProjectCars 7 лет назад
Thank you Michael :)
@7ShiroOokami7
@7ShiroOokami7 7 лет назад
Will this work for chrome factory wheels with clear coat. The clear on mine are looking bad on the front rims and i am trying to find a way to make them look better
@SweetProjectCars
@SweetProjectCars 7 лет назад
YES it will work great
@eiserntorsphantomoftheoper2154
I've noticed the stripper is not available in Amazon. They took a chemical methyl-something out. Any recommendations for a good clearcoat stripper ?
@eiserntorsphantomoftheoper2154
PS. I have exact same wheels from same car. Lol
@SweetProjectCars
@SweetProjectCars 5 лет назад
this is what we use now amzn.to/2H4NJHx
@TheRealCardz
@TheRealCardz 7 лет назад
Do you need to seal them after they're stripped? Won't they rust real fast with no protectant or no?
@SweetProjectCars
@SweetProjectCars 7 лет назад
yes you can clear them or just keep them poished this way they wont oxidize again
@TheRealCardz
@TheRealCardz 7 лет назад
Thank you sir!
@jgto17
@jgto17 7 лет назад
but it DOES corrode, which is just as bad. Matter of fact, aluminum will corrode faster than steel. If it were my wheels, I'd apply clear to them after stripping the old stuff.
@SweetProjectCars
@SweetProjectCars 7 лет назад
they corrode way less if they are kept out of salt and the car is washed once a week in the highest times of the year for road salt
@packroyliao7561
@packroyliao7561 7 лет назад
will they not corrode if there is no road salt in my area
@thesavagedisco7906
@thesavagedisco7906 Год назад
i know im 6 years behind here BUT, my moms got a lincoln thats got some peeling wheels as well as some pitting, should i expect to sand em a bit?
@SweetProjectCars
@SweetProjectCars Год назад
We have a lot of videos on wheel reconditioning, you can check them out, if you want the wheels to be perfect you will have to sand them a bit. Thank you for watching and asking, have a great day my friend. mad Mike the hammer SPC
@user-nr4sp1fb4u
@user-nr4sp1fb4u 4 месяца назад
Where do you buy the gel at
@wescleer5864
@wescleer5864 6 лет назад
I have like charcoal black stock rims with the clear chipping off with this work?
@SweetProjectCars
@SweetProjectCars 6 лет назад
if the rim under the clear is not painted..this stripper will remove all coatings! if your rims are anodized you will be safe but still try a very small area to check.
@armcomdes
@armcomdes 7 лет назад
Did you re-clear coat them afterwards? Would a new clear coat help keep the wheels looking good for a longer time?
@SweetProjectCars
@SweetProjectCars 7 лет назад
yes we recleared and it will keep them looking good much much longer
@stevejohnston3339
@stevejohnston3339 Год назад
@@SweetProjectCars did you have to rough up before clear? What clear did you use?
@love2flash
@love2flash Год назад
after removing the clear coat and paint, what do you use to protect from rust and corrosion, but just keep same pretty rim color?
@SweetProjectCars
@SweetProjectCars Год назад
Use this amzn.to/3lgx0W1 as shown in our updated video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MfkcTtgXTTw.html Thank you for watching and asking will, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@love2flash
@love2flash Год назад
@@SweetProjectCars Thanks, i will try it, if i ever remove the all the old paint/clear coat... its taking me forever with, aircraft remover/water hose, and sand paper, at this rate, maybe next month i will be ready to put the finish on them, LOL.
@brucesheehe6305
@brucesheehe6305 5 месяцев назад
Perfect spot for a ceramic coating afterward. Don't need to clearcoat them.
@SweetProjectCars
@SweetProjectCars 5 месяцев назад
You can do either Bruce! Thanks for watching and sharing, hope you have a great weekend. mad Mike & team
@raymondjoseph7177
@raymondjoseph7177 2 года назад
Old video hope i can get a reply. The center caps on mine look similar to yours. Mine are plastic though. Are yours? If so how did you polish without getting down to plastic? Thanks gonna buy stripper tomorrow.
@SweetProjectCars
@SweetProjectCars 2 года назад
Use this amzn.to/3uzQ2Ip to polish the caps by hand. Thanks for watching and asking, Raymond, have a great week and all the best on your project. mad Mike the hammer SPC
@raymondjoseph7177
@raymondjoseph7177 2 года назад
@@SweetProjectCars thanks will do
@aquaticterrafirma
@aquaticterrafirma Год назад
@@SweetProjectCars You did say the stripper won’t hurt the center caps correct?
@user-xp1xm8pr5j
@user-xp1xm8pr5j 2 года назад
My cadilac ct6 has rims that are painted black over aloy. Well there was no recall but the black is peeling. Some of the rims are almost silver where others seem to be peeling less. Would this chemical take of remaining pathetic black paint gm used?
@SweetProjectCars
@SweetProjectCars 2 года назад
Give it a shot M, use this amzn.to/2H4NJHx if it doesn't work you are going to have to have them bead blasted my friend. Thanks for watching, have a great week and all the best on your project. mad Mike the hammer SPC
@user-xp1xm8pr5j
@user-xp1xm8pr5j 2 года назад
@@SweetProjectCars your a GOAT...I hope and pray your views and subscribers shoot pass what you can think or project. I'll keep you posted with the outcome. Thanks for loving on your viewers new and old by replying. I'm a believer and a subscriber. Blessings to you.
@bikescarsandmore6156
@bikescarsandmore6156 2 года назад
I was tryna do it to some black n machines wheels but think it’s gonna take the paint off too
@SweetProjectCars
@SweetProjectCars 2 года назад
The paint stripper is going to take everything off to bare metal, so you will have to repaint them or have them powder coated after this process. Thanks for watching, have a great day. mad Mike the hammer SPC
@bradysolaem2467
@bradysolaem2467 4 года назад
Do you put another layer of clear? Or just clean often
@SweetProjectCars
@SweetProjectCars 4 года назад
brady you can place as many coats of clear on you like or you can use this and be done with it goo.gl/z9TrgR
@dannnyvq
@dannnyvq 3 года назад
Could you just leave your wheels like that after stripping the paint And clearcoat
@SweetProjectCars
@SweetProjectCars 3 года назад
You can leave them however you want, it's totally up to you. We do suggest you use this amzn.to/2DD6zGG for protection of the wheels though. Thanks for the question! Have a fantastic day. mad Mike the hammer SPC
@malvizar85
@malvizar85 5 лет назад
Is there an alternative to power washing the rims? As I don't own one. Also what clear coat do you recommend so it can last the longest. Should I use an aerosol 2k clear coat or regular duplicolor rim clear coat? Thanks !! 🤙🤙🤙
@SweetProjectCars
@SweetProjectCars 5 лет назад
Alexo a garden hose with this nozzle works great amzn.to/2PAib1X or just spend a little more and get this amzn.to/2KgsbY5 also if you rattle can clearing them we use this amzn.to/2DN31jB
@chipb1193
@chipb1193 5 лет назад
If you’ve got an extra car, take them to a quarter car wash and spray them off there. Obviously get as much of the goo off when your at home but that should help.
@cortya
@cortya 6 лет назад
Bloody hell. I thought that was Rich Hall narrating. Well done though. cheers 🍻
@SweetProjectCars
@SweetProjectCars 6 лет назад
cortya thank you and you are very welcome my friend :)
@TheLiberatiOfTruth
@TheLiberatiOfTruth 7 лет назад
What do you do to the center cap (my caddi one is plastic)? It is dull.
@SweetProjectCars
@SweetProjectCars 7 лет назад
clean it and paint & clear it
@TheLiberatiOfTruth
@TheLiberatiOfTruth 7 лет назад
Thanks brother. Great videos by the way
@nixworld767
@nixworld767 5 лет назад
@@SweetProjectCars Great idea! I've got the same issue as the guy who asked the question about Cadillac center caps. Never thought about the caps being a little mini-project within a project. Gonna do it!
@engrxtn
@engrxtn 9 месяцев назад
I need to remove the clear out of painted wheels. Will it damage the paint as well?
@SweetProjectCars
@SweetProjectCars 9 месяцев назад
This stuff will strip off everything right down to bare metal, there's no way to remove clear coat without affecting the paint. So if you don't want to monkey with this process you can take them somewhere and have them bead blast them for you. Thank you for watching and asking, hope you have a great weekend and all the best on your project my friend. mad Mike
@mcwanefairley6416
@mcwanefairley6416 4 года назад
Can I put this on while my wheel is still on the car?
@SweetProjectCars
@SweetProjectCars 3 года назад
You can give it a shot, but if it doesn't work out for you, you know what you have to do. Have a great day, thanks for the question. mad Mike the hammer SPC
@danb.3397
@danb.3397 2 года назад
SWEET !
@SweetProjectCars
@SweetProjectCars 2 года назад
Thank you very much, Dan! We really appreciate the view and comment, have a great day my friend. mad Mike the hammer SPC
@Kiara.Danielle
@Kiara.Danielle Год назад
Does it not damage the rims after removing the protective clear coat?
@SweetProjectCars
@SweetProjectCars Год назад
Let me help you out with this, whatever is on the base metal of the wheel/rim will be removed doing this process which includes clear coat & paint. Then at that point you will buff and polish them into whatever shine you want. If you plan on re-clearing them, use this amzn.to/3lgx0W1 Thanks for watching and asking, have a great day. mad Mike the hammer SPC
@ogreunderbridge5204
@ogreunderbridge5204 6 лет назад
Funny name for a paintstripper, "Aircraft Remover" . Sounds like an aluminium dissolvent agent :))
@SweetProjectCars
@SweetProjectCars 6 лет назад
we thank you very much and for the quality comment, it is very helpful for the whole channel :)
@ThePnoosh
@ThePnoosh 4 года назад
Keep away from aircraft's the can of "aircraft replacer" is pretty rare and expensive.
@sergiocar98
@sergiocar98 7 лет назад
best video
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you Sergio
@FriendM2010
@FriendM2010 Год назад
Easy Peasy! Let’s see you strip clear from a 2 stage alloy wheel? I have expensive alloy wheels that have very little damage, but, I want to go from silver to base black, then clear. Do I strip all layers to alloy and prime,base, clear or scuff up the clear really good and go base and clear? Not rattle can, I will spray myself with gun.
@SweetProjectCars
@SweetProjectCars Год назад
Well if the wheels are as expensive as you say they are, then there's only one way to do it and it's to do it right. You may have to do this process a couple of times to remove all of the clear, then you can paint them hot pink if you want or any other color that trips your trigger. Thanks for watching and asking. mad Mike the hammer SPC
@FriendM2010
@FriendM2010 Год назад
@@SweetProjectCars trigger tripper here, After much searching, found an Industrial stripper that exceeds all the aircraft crap. 👍
@danb.3397
@danb.3397 4 года назад
Okayeee
@lungandfoot
@lungandfoot 5 лет назад
I have this exact set of wheels-any way to protect all these holes from brake dust? Or just constant washing and polishing?
@SweetProjectCars
@SweetProjectCars 5 лет назад
Brian Sterling see this video and how we protect them ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gxouiNX8JM0.html
@aquaticterrafirma
@aquaticterrafirma Год назад
I’m just wondering why I couldn’t leave the wheels on to strip then drive to car wash to power wash.
@SweetProjectCars
@SweetProjectCars Год назад
You can do whatever you want to do my friend, if you don't mind blowing that stuff all over your car while driving. Some of the chemicals in the cleaners are something you don't want all over your car, but again, you can do whatever you want to do. Thanks for watching, have a great day. mad Mike the hammer SPC
@aquaticterrafirma
@aquaticterrafirma Год назад
@@SweetProjectCars I got the chemical finally, are you sure can use on the plastic canter caps? Thanks
@wild8757
@wild8757 Год назад
Did you re-clear coat them after stripping everything?
@SweetProjectCars
@SweetProjectCars Год назад
We didn't re-clear this set, but we have re-cleared many others using this amzn.to/3lgx0W1 it's the best we've found MB. Thank you for watching and asking, have a great weekend my friend. mad Mike the hammer SPC
@wild8757
@wild8757 Год назад
@@SweetProjectCars yeah I have a few cans of that type clearcoat laying around, I’ll be mixing my own 2 part clearcoat and spraying it on with a gun, my problem is the rustoleum aircraft remover that you used is not available anymore in it’s original formula, the fed changed the law for the environment so the new formulation of the same product sucks, it doesn’t even wrinkle or bubble the paint like the old formula did in five minutes, the reviews are horrible for it, all of the paint strippers from all brands have had to change their formula because of the new law, I can’t find anything available anymore that actually works to get off the old clearcoat and paint, same thing with the Permatex paint stripper, has been discontinued because of the new law. The chemical removed that made it work so good is supposedly methylene chloride.
@benyamintee9909
@benyamintee9909 3 года назад
Do you have to recoat it after?
@SweetProjectCars
@SweetProjectCars 3 года назад
Use this after goo.gl/Eqjnp3 and you will never have to mess with it again. Thanks for asking. Have a great day my friend. mad Mike the hammer SPC
@johndoe-ie1be
@johndoe-ie1be 3 года назад
Will the stripper hurt the tires ?
@SweetProjectCars
@SweetProjectCars 3 года назад
We use it all the time and have never had an issue in 40 plus years. Thanks. mad Mike the hammer SPC
@williampotter2093
@williampotter2093 Год назад
do the wheels rust without the final coat?
@SweetProjectCars
@SweetProjectCars Год назад
If you have steel wheels and you do not put this goo.gl/z9TrgR or this amzn.to/3lgx0W1 on they will definitely rust William. Hope this helps, thanks for watching and asking, have a great day my friend. mad Mike the hammer SPC
@subarufan1237
@subarufan1237 2 года назад
Does this remove paint or just the clear coat
@SweetProjectCars
@SweetProjectCars 2 года назад
Whatever is on that wheel is coming off..... it takes it right to bare metal. Thanks for watching and asking, have a great day. mad Mike the hammer SPC
@dvader3000
@dvader3000 3 года назад
Ans how do i protect them after i strip them?
@SweetProjectCars
@SweetProjectCars 3 года назад
This is what we use to protect them goo.gl/z9TrgR Then watch this video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gxouiNX8JM0.html to see how we apply it. Thanks for watching and asking. Have a great day. mad Mike the hammer SPC
@josehuerta4812
@josehuerta4812 2 года назад
Do you have to clear coat again?
@SweetProjectCars
@SweetProjectCars Год назад
Do this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MfkcTtgXTTw.html next. Thanks for watching, have a great day. mad Mike
@filmmakingandstuff4993
@filmmakingandstuff4993 10 месяцев назад
Do you clear coat again after?
@SweetProjectCars
@SweetProjectCars 10 месяцев назад
Please watch the video a couple more times, in its entirety, I'm sure we answer that question, but just in case, yes we do. Thanks for watching, have a great week. mad Mike
@lsxpower3367
@lsxpower3367 Год назад
Can you apply a clear coat?
@SweetProjectCars
@SweetProjectCars Год назад
See this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MfkcTtgXTTw.html Thanks for watching and asking Lsx, have a great day. mad Mike the hammer SPC
@alb12345672
@alb12345672 6 лет назад
I Have those wheels, the corrosion is very hard to get off., What exactly did u use?
@SweetProjectCars
@SweetProjectCars 6 лет назад
alb12345672 this is what we used amzn.to/2zPdZyI
@alb12345672
@alb12345672 6 лет назад
Brake cleaner believe it or not works too. I'm having trouble with the crusty corrosion. What pad did you use?
@SweetProjectCars
@SweetProjectCars 6 лет назад
alb12345672 see these videos to make them look new ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IDoIpxzZNqo.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kk8UbGjox_0.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vszhfF4TV5M.html
@JamesBrown-rm2rd
@JamesBrown-rm2rd 2 года назад
will it harm chrome rims
@SweetProjectCars
@SweetProjectCars 2 года назад
No it won't. We've never had it affect chrome as long as it's quality chrome work. Thanks for watching and asking James, have a great day. mad Mike the hammer SPC
@mgn.9825
@mgn.9825 5 лет назад
👍
@thewayidoit8895
@thewayidoit8895 Год назад
You need an intro like "Welcome to Sweeeeeeeeetttt project cars!" And in the middle break away to let a voice over guy describe the supplies. Name the guy Hector or Juan, Luis or Roberto!
@SweetProjectCars
@SweetProjectCars Год назад
LOL, I think that's a fantastic idea, maybe our friend Hoolio can explain where all the products/tools can be found :) Thank you for watching, have a great day my friend. mad Mike the hammer SPC
@icantgivecredit871
@icantgivecredit871 3 года назад
Don't you need to re-apply clear coat to the rims afterwards? I'm wondering how long they'll stay fresh without any clear coat.
@SweetProjectCars
@SweetProjectCars 3 года назад
After you are done, use this goo.gl/z9TrgR Thank you for watching and asking Masda, we appreciate it my friend. Have a fantastic day. mad Mike the hammer SPC
@mgamga9476
@mgamga9476 3 года назад
I do not want to go against someone else's advice but...I would definitely clear coat bare wheel. Reason, brake dust and dirt will stick to aluminum and be very hard to remove. This is why they are clear coated in the first place. I been there done that. My bare rims became discolored and needed a light sanding than clearcoat and it solved problem.
@bailey4857
@bailey4857 4 года назад
So this takes of clearcoat but not paint
@techromancer1
@techromancer1 Год назад
What mother product..did you fire Julio?😂😂
@SweetProjectCars
@SweetProjectCars Год назад
It's this amzn.to/2C18A9Z and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching, and Hoolio is still around and kicking :) mad Mike the hammer SPC
@Bluecollarworkingman
@Bluecollarworkingman 6 лет назад
Wish I knew of the product ten years ago lol.
@SweetProjectCars
@SweetProjectCars 6 лет назад
im with ya on that thank you very much...and for the great comment, we are glad you are here with us :)
@SweetProjectCars
@SweetProjectCars 6 лет назад
im with ya on that thank you very much...and for the great comment, we are glad you are here with us :)
@MrGrzmnky
@MrGrzmnky 7 лет назад
what did u do to the cap
@SweetProjectCars
@SweetProjectCars 7 лет назад
SAME PROCESS :)
@hwfranjr
@hwfranjr 9 месяцев назад
Most paint strippers can do same,but when ya using them better Watch The painted AREAS not clear COAT,lol,Will strip all paint off,lol
@SweetProjectCars
@SweetProjectCars 9 месяцев назад
If you want to remove what we share then use the process we have shared here. This is meant to show how to strip everything off down to bare metal. For instance, if you want the paint off your car or wheels, follow the video. Thanks for the view and comment, have a great week. mad Mike
Далее
Can You Repair Badly Damaged and Peeling Clear Coat?
12:27
Brawl Stars Animation: PAINT BRAWL STARTS NOW!
00:52
ЮТУБ ТОЧНО ВСЕ!
11:23
Просмотров 602 тыс.
How to Remove the Paint or Clear Coat from Wheels
3:46
HOW TO POLISH ALUMINUM WHEELS W/ PEALING CLEAR COAT !
18:04
How to Repair Rims with Curb Rash or Scratches
14:07
How to Repair Clear Coat Fix 100% all types
6:05
Просмотров 12 млн
How To Remove Paint Off Your Rims (Fast,Easy,Effective)
11:33
BEST RIM CLEANER IN THE WORLD! --And FREE
13:12
Просмотров 676 тыс.
How To STOP Wheel CORROSION Before it Starts...diy
12:55
Wheel Restoration TWO COLORS! Tips and Tricks!!!
19:12
Просмотров 511 тыс.
How to refinish aluminum rims on a budget
13:16
Просмотров 223 тыс.
Every car need this.#car #carhack #shortsyoutube
1:00
что за звук?
0:15
Просмотров 3,2 млн
Manual installation process of highway guardrail
0:15