How to Remove the Bumper on Skoda Octavia Mk3 (2013 - 2020)

Подписаться 1,1 тыс.

Просмотров 10 тыс.

50% 1

Step by step guide on how to remove & replace the bumper on a Mark3 Skoda Octavia (made from 2013 to 2020). You will need to remove the bumper to change the headlights, radiator, aircon condenser etc.
Other Videos: Wing Removal: • Skoda Octavia Front Wi...
If this helped you, please consider buying me a coffee to say "thank you": www.buymeacoffee.com/fixitwit...
Tools you will need
(optional) More expensive Teng Tools Bit ratchet adapter. Buy from eBay: geni.us/D9HO
(optional) Sealey alternative to Teng ratchet adapter: geni.us/gO1L
(cheaper) 1/4" right angle adapter: geni.us/UkRs5r
(optional) An interesting looking alternative to the above (untested in this application) 1/4" ratchet with flex head: geni.us/rTdBc
1/4" socket set: geni.us/GSRN0q7
T20, T25 Torx Bit: geni.us/ARN2vDL
Low profile jack: geni.us/YJGjvA
Slotted jack pad for sills: geni.us/YgAckFT
Jack stands (I prefer 3 Ton): geni.us/bzcysWt
Rubber slotted pad for jack stands: geni.us/THXyBZr
Screwdriver set: geni.us/PKUmD
(optional) DeWalt Impact Driver: geni.us/1dMRxm
(optional) Impact driver adapter kit: geni.us/B1cL
(optional) Mechanics gloves (I LOVE these): geni.us/Sg0hFAw
Disclaimer: If you buy from the links above I receive a small commission which helps fund the channel.
If this helps you, please consider liking and subscribing. Any questions or feedback - please leave below!
00:00 Overview of the job
01:14 Remove screws underneath
01:38 Remove screws on top
01:51 Remove wheelarch liner
03:08 Special tools for "difficult" bolts
04:01 Removal of "difficult" bolts behind the headlights
04:43 Removal of plastic clips
05:49 Disconnect fog lights & headlight washer hoses
06:31 Swap metal brackets over to new bumper (if changing)
07:04 Reinstall Start
07:07 Connect fog lights connector and headlight washer hoses
07:31 Bumper alignment
07:52 Push bumper into place until it "clicks"
08:02 Top bolts install
08:26 Hard bolts install
08:40 Wheelarch liner install
10:20 Replace screws underneath

Хобби

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@FixItWithJon Год назад

Step by step guide on how to remove & replace the bumper on a Mark3 Skoda Octavia (made from 2013 to 2020). You will need to remove the bumper to change the headlights, radiator, aircon condenser etc Tools you will need 1/4" socket set: geni.us/GSRN0q7 T20, T25 Torx Bit: geni.us/ARN2vDL Low profile jack: geni.us/YJGjvA Slotted jack pad for sills: geni.us/YgAckFT Jack stands (I prefer 3 Ton): geni.us/bzcysWt Rubber slotted pad for jack stands: geni.us/THXyBZr Screwdriver set: geni.us/S540My4 (optional) DeWalt Impact Driver: geni.us/1dMRxm (optional) Impact driver adapter kit: geni.us/B1cL (optional) Mechanics gloves (I LOVE these): geni.us/Sg0hFAw Disclaimer: If buy from the links above I receive a small commission which helps fund the channel. If this helps you, please consider liking and subscribing. Any questions or feedback - please leave below!

@T00ble Год назад

Absolute thank you for the help, I’ve retrofitted LED HID projector lights to my Octavia. I was stuck for awhile in all honesty until I seen this Many thanks

@FixItWithJon Год назад

@T00ble Really glad it helped :-) It was a pig of a job the first time I did it..

@tomludlow6516 Месяц назад

Cheers for the video, if I wanted to replace just the black grill and not the bumper is it a whole bumper off job I assume? Thanks

@FixItWithJon Месяц назад

@tomludlow6516 Unfortunately yes pal - it's a ****ache but quite easy once you've done it once..

@katehyde2232 4 месяца назад

Thanks for this. How long do you think the removal and refitting would take to complete?

@FixItWithJon 4 месяца назад

@katehyde2232 glad it helped :-) Filming took three days and three separate takes. It was a real pig of a job to work it out, but with the guidance in the video and the right tools I would expect you to have the bumper off well within three hours on your first go. Hope that helps?

@diarmuidenglishby3935 3 месяца назад

I've somehow managed to break one of the release clips and now can't release one side. Any ideas how I can release it with the clip where you push down is broken off?

@FixItWithJon 2 месяца назад

Unfortunately pal your only real option is brute force - one of mine broke off in the end but I found that made it stop latching so it made it easier to remove.. Let me know how you get on?

@jarmotakkinen1883 2 месяца назад

Hello, I'll probably need to remove the front wings from my Seat Toledo MK4 (basically the same car as this Skoda)... does the bumper need to be completely removed in order to remove front wing or is it enough to do this up until the 3:08 mark?

@FixItWithJon 2 месяца назад

Hiya, no there’s no need to remove the bumper / headlight - as long as you take out the 2 “difficult” bolts behind the headlight. Hope that helps?