How to Replace a Crankshaft Sensor on ANY Car!

Подписаться 40 тыс.

Просмотров 614 тыс.

50% 1

This video shows you how to change a crankshaft position sensor on any car. Do this easy job yourself, with simple tools, and save $$$! 🔔 SUBSCRIBE for more helpful videos on random subjects (It's FREE!) ➜ bit.ly/HelpfulVideosFromChris
Learn how to start an online business in your spare time ➜ freedomwithchris.com
Buy a new crank sensor here ➜ amzn.to/2Ozt2Vm
If you want to buy an OBD II code reader (AKA Code Scanner or Diagnostic Scan Tool), so that you can read AND clear codes on your car, you can buy a very highly rated model at a great price here ➜ amzn.to/2weAD3w
Crankshaft sensor symptoms [when faulty]:
If your car is running roughly, the engine speed is 'hunting', the car won't start, won't reach high revs, lacks power or cuts out whilst driving, check to see if you have a faulty crankshaft position sensor (error code P0335) or camshaft position sensor (error code P0340).
(Camshaft position sensors are the basically the same as crankshaft position sensors, but are easier to get to - 'Murphy's law' dictates that out of the two, the crankshaft sensor is the one that will fail, because that is the harder of the two jobs to do! If you need to replace your cam sensor, this video will help you too)
Check out my website post about this video for more information:
randomchris.com/diy/car-mainte...
Once you buy the replacement sensor you can do this job yourself in a couple of hours. Keep total control over your vehicle by fixing it at home on your terms.
Subscribe to see more of my videos (It's FREE!)🔔 ➜ bit.ly/HelpfulVideosFromChris
Cheers!
Chris 👍
--------------------
'Random Chris' is a Helvellyn Ltd brand. Disclaimer: Due to factors beyond the control of Helvellyn Ltd, we cannot guarantee against unauthorized modifications of this information, or improper use of this information. Helvellyn Ltd assumes no liability for property damage, injury or death incurred as a result of any of the information contained in this video. Helvellyn Ltd. recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, open flames, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Helvellyn Ltd, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Helvellyn Ltd. Disclosure: any links in this description may be affiliate links. If you decide to buy some items from them, Helvellyn Ltd may receive a small percentage compensation for having suggested the suppliers to you. (This costs you nothing) As an Amazon Associate we earn from qualifying purchases. Helvellyn Ltd only recommends suppliers and products which we believe in, so there is never any conflict of interest.
#howto #cranksensor #crankshaftsensor

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 264

@jjsman7353 5 лет назад

Scotty Knows! That’s what I say when I share your videos. Your energy is addictive, in a good way! Thanks Scotty!

@christopher_barr 5 лет назад

My pleasure Fred! ;-)

@NJ-zw6uh 7 лет назад

Real good video, great camera shots and detailed explanations, Thanks !!

@christopher_barr 7 лет назад

Thank you Keenan, for some reason the visibility of this video on RU-vid has been quite low... I'm glad you found it useful! Cheers, Chris 👍

@bone_face 5 лет назад

This guy is great! I want to open a garage and this guy is our man. Very personable and brilliant

@christopher_barr 5 лет назад

Cheers Dominic! This was one of my first videos so I was very self-conscious in front of the camera. I think I've improved a lot since then. 👍

@ethanlinton1159 3 года назад

but very proud and expensive. He would want gain top of everyone in the shop

@johnbartrambrooks8882 3 года назад

Well done, especially the hop, skip and a jump.

@spazchicken1 2 года назад

Cannot get the new one one back in after tapping the old one out… put oil on it but it won’t budge after 1/3 way in . Will it hurt to lightly tap it down ? 😞

@Cmi7lilmomma118 6 лет назад

love how you did everything step by step. makes it much easier on me

@christopher_barr 6 лет назад

Thanks for watching and commenting Jocelyn :-)

@endriits1152 4 года назад

🔥🔥

@nicknameshorty 4 года назад

Super helpful! I like the way you do this without any dilly dally!

@christopher_barr 4 года назад

Cheers mate, I'm glad you found this useful. This was one of my first videos and it's funny for me to watch back now. :-)

@AmeenToys 2 года назад

Very useful & Good presentation 👍🏼

@heuliseslopez4204 3 года назад

Thank you for this video! It’s good and shows you step by step. :)

@christopher_barr 3 года назад

My pleasure! 👍

@AlessandroLucchet 6 лет назад

thank you very much! i just replaced my crankshaft sensor on my astra gtc my06 1.7. very useful video

@christopher_barr 6 лет назад

My pleasure Alessandro - sono contento che sei riuscito ad aggiustare la tua macchina in parte grazie al mio video!! Cheers! Chris 👍

@dividedwefall5382 3 месяца назад

Thanks! But... Halfway through I realized, this wasn't a camshaft video... I searched camshaft... I got crankshaft... But you told me it's generally easier! So that's cool lol. I went to replace the water pump on Mom's 2000 mustang. Found it in horrible condition! Heater hose was bent all to he11. A bolt was broke off in there was half the problem to begin with. Somehow at that moment that alternator decided to go the rest of the way out. And when I decided this is getting over my head, I put it in the shop, where they found the bad camshaft sensor. I had figured some valves just needed cleaned. So a week long project, and putting it in the shop later, THIS is all I gotta do to get her car running normally again. I can live with that! They priced it at about $150. But I can get the part for 10-15 bucks. Probably gonna do it myself and save the thousand percent mark up

@user-wx5mb4ch9f Год назад

Beautiful instructions thank you see you soon 😊

@Lauren-ic8gw Год назад

Great video. very informative and easy to understand and see what u r doing. And a few extra hints and tips too. Thank u. Hopefully mine will be similar Nd similarly easy. Just picked the part up so just gonna see if I can seen it.

@DonnaHilton-xw1ho 22 дня назад

Told me exactly what to do and where to find it. Now I think I can replace the part myself!

@christopher_barr 21 день назад

Good luck with the job Donna! 🙂

@user-vt6px1sl3o 6 лет назад

hello today we tried to replace bosch orinal and faulty crank shaft sensor with subsistute ERA compatible part new one and it gave same error g28 while not starting do you have any idea why it did not work?

@taylorpresley9887 3 года назад

How come you didn't have to perform a relearn procedure?

@williambiggs2308 7 лет назад

Great explanation and video. Thank you Christopher!

@christopher_barr 7 лет назад

My pleasure William, thanks for your comment 👍

@Mr4thetruth 5 лет назад

Great vid! Thank you Chris.

@christopher_barr 5 лет назад

My pleasure Graham. This was one of my first vids, so I was very uncomfortable in front of the camera. 😂 Cheers, Chris 👍

@simonhendricks9397 2 года назад

Super helpful Thanks

@aky280 3 года назад

Great video!

@secularpilgrim1372 Год назад

Good video. Thank you!

@dingo79us 3 года назад

Thanks man very helpful. Watching this video in sept 2020😁🚗🚘

@christopher_barr 3 года назад

👍😁

@ianwilliamson8161 3 года назад

Thanks so much done mine now

@davekauffman8727 6 лет назад

Cheers from "across the pond", I'll save a few dollars. Thanks for the tip :-)

@christopher_barr 6 лет назад

My pleasure Dave! Cheers, Chris 👍

@koshtereyu5318 Год назад

This was very informative thank you.

@christopher_barr 21 день назад

My pleasure! 👍

@danielbeckles3090 5 лет назад

Great work Buddy, I'm From south America Guyana,I have a 2000 model Japanese RAV 4, recently it's cutting off or The rev is fluctuating,and my mechanic can't seems to find The problem, any suggestions

@barry-cq4xg 4 года назад

great video. I spotted the red ant, but more interesting was the Opel! have not seen these on UK roads for years.

@christopher_barr 4 года назад

Thanks Barry, this was in Italy (My wife is Italian) 👍

@barry-cq4xg 4 года назад

@@christopher_barr Hi Chris thanks for your reply barry

@soulpunisher7082 3 года назад

Would it be on the same spot on a 05 civic?

@bridgewatercontract1 5 лет назад

Thanks very much! Subscribed

@christopher_barr 5 лет назад

Welcome aboard Chris 👍

@Mr.Haque01 3 года назад

Great job 👏👍👌🇬🇧

@sukhpoonib 3 года назад

Great video but the victory dance in the end............Got me to subscribe :D

@christopher_barr 3 года назад

👍

@feralfreebirds 3 года назад

AH Christopher..just subscribed !.....do you have ANY IDEAS for me please.......ive been trying to remove the retaining bolt from my crank shaft sensor (since last lockdown :( ........on a ford transit, bugger to get to as on back on block and so hard to get any tools in there.....just spent 2 hrs with a neighbour and tried to put a screwdriver between the plastic and the engine, to leaver , the bolts just going round & round .....any tips? ideas please ..I soo wanna do the victory dance ....!!

@silentecho4445 2 года назад

That looks easy thnx

@007camera 5 лет назад

Loved the victory dance👍🏻👍🏻👍🏻👍🏻👍🏻😀😀😀

@christopher_barr 5 лет назад

👍

@screwsnutsandbolts 5 лет назад

Great videos, I subscribed :)

@christopher_barr 5 лет назад

Thank you, welcome aboard! 👍

@screwsnutsandbolts 5 лет назад

Cheers !

@CheriBomzArt 3 года назад

Can the ignition switch go bad at the same time?

@trev13021971 8 лет назад

Great vid Chris, subbed

@christopher_barr 8 лет назад

Thanks Trev, welcome aboard! Cheers, Chris

@ethanlinton1159 3 года назад

@@christopher_barr Thank you too for the subt

@jamesspeed4616 6 лет назад

Never commented on any video's before but really liked Random Chris, easy to understand even for a dumb ass like me!!

@christopher_barr 6 лет назад

Thank you for taking the time to comment James. Cheers, Chris 👍

@DonnaHilton-xw1ho 22 дня назад

I understand. I'm a woman and he explained everything in layman's terms.

@sundelight8230 2 года назад

Hi i have a vauxhall vectra 2007 and my engine light tells me the camshaft sensor needs replacing. Do i change the camshaft sensor and the crankshaft sensor or just the cam shaft sensor i know where the cam shaft sensor is but dont know where the crankshaft sensor is. Please can tou advice me a solution thanks

@atomicdmt8763 3 года назад

thanks! i recently put in a NEW (but bad) CKP sensor and its apparently shorted internally- screwing up my fuel level gauge, ignition coil/ignitor(?) and setting off a host of other selonoids- et al! I cleaned all grounds, rebuilt my fuse box, new ECU, cleaned everything........no changes UNTIL i just now decided to swap back in the old CKP sensor. All the electrical clicking, etc went away immediately and Im not going thru the KEY RELEARN process for the new ECU

@karlparfitt7998 Год назад

Is there a relearn process on the obd2 after install?

@alexflips393 3 года назад

Thanks. There isn’t any fault code coming up. Does this mean it could still be the crankshaft sensor?

@davejohnston5158 2 года назад

Good advice Chris. It was an easy replacement on my Saab after cutting out only after a few miles of driving. It appears the sensor was working when cold but not when hot. Trouble is as the car coasted to a stop it threw up a Traction Control warning so made me think that was the problem initially. Doh!

@MsApril16th Год назад

Hi, My car is starting to do this "when hot" also. So did you find out if the old sensor was still any good since it seemed to be just a weather issue? Thank you

@davejohnston5158 Год назад

@@MsApril16th If there is a coil in the sensor it may have a break in it and only lose current when hot. Easy cheap replacement to do. Cyclone Sid's channel touches on other engine stop issues caused by electric connections.

@altheaarendse8508 3 месяца назад

Hi Chris where can I find the crank shaft sensor on a tata indica 2013 model please

@jorgewinck 5 лет назад

Thank you so much

@christopher_barr 5 лет назад

You're welcome George 👍

@ianmccarthy4195 2 месяца назад

Hi buddy we have in Australia is that a Ah Astra Holden thanks for your help

@manufacturingdefect1287 4 года назад

Thanks bro

@Ruel-rc2ly Год назад

I'm putting one on a 05' Neon right now thanks for sharing. I have owned it 15 yrs only has a 100k on it today...

@PLiVX 3 года назад

Hello, Is it possible if the OBDII Scanner doesn't recognize the crankshaft sensor to be broken?

@chevyboyz1000 5 лет назад

Great vid

@christopher_barr 5 лет назад

Thanks! Chris 👍

@tundealabi8564 5 лет назад

Perfect timing for me. Thanks for this video. Greetings from Lagos, Nigeria.

@christopher_barr 5 лет назад

Cheers Tunde 👍

@cayetanococ7470 3 года назад

Great job bro,i had that problem with my Saturn Vue, crank and no start.

@jeremyjones8872 2 года назад

I just had a mechanic tell me the code came up so it needed to get replaced on my saturn ion..buuut my car runs and everything i see if its bad the car won't start??🤔

@chrisdperez786 3 года назад

Can i replace these sensors if my vechicle is fine?

@seansfc 3 года назад

good stuff

@YadaG1984 2 года назад

What if I disconnected both battery post will it be fine

@sarcasticgamer136 5 лет назад

Very good detailed video well explained keep up the good work

@christopher_barr 5 лет назад

My pleasure 👌 Cheers, Chris 👍

@hardyjoe4278 6 лет назад

I was told it could start with the sensors, leading into the whole circuit. I got p0335, p0340 from an OBDII scanner, hence this video. Thanks

@christopher_barr 6 лет назад

My pleasure Joe, happy fixing! Cheers, Chris 👍

@haughtysurfer1012 6 лет назад

subscribed. helpfull video

@christopher_barr 4 года назад

Welcome aboard :-)

@OhForAnotherShez 6 лет назад

Anyone know where the crank sensor is on Peugeot 106 diesel (2002) please?

@hugomartinez3460 Год назад

Is it useful for P050074 too?

@amorbatna2725 4 года назад

يعطيك الصحة

@Zondah 2 года назад

Thanks mate!

@christopher_barr 21 день назад

👍

@damonodom6062 6 лет назад

I need to locate crank shaft sensor an a Toyota four runner two wheel drive 1993 model with a 3.0 liter

@folafola007 6 лет назад

Hi Chris, what are the main difference between crankshaft symptoms and camshaft symptoms pls? I have a Ford focus 1.6 tdci 2009, it just started cutting off power on motorway or doing bend on roundabout.. But it starts immediately after ( never struggle to start after cutting off). No fault codes on computer, no lights on dash. Mechanic still can't find the problem. But online I read it could be camshaft sensor, crankshaft sensor or fuel rail pressure sensor. Pls what is your opinion? And possible of where to locate these sensors on the Ford focus?

@jeremyjones8872 2 года назад

Hey did you ever figure out your car issue?? Im just curious as to what it was? I had same issue and it was the throttle positioning sensor(or something name close to that

@dannyBtech 11 месяцев назад

@@jeremyjones8872 did you get engine light ?/ my car stalls at random mainly when warm its usually when sat in traffic or slowing down , it starts back straight away

@jeremyjones8872 11 месяцев назад

@@dannyBtech yes my engine light was on but it stayed on until i fixed.and when i was at a light the rpm's would drop and either shut off or want to shut off(if i put in neutral and revd it until light was green is 1way to not have it shut off. Were you able to test it with tester?

@dannyBtech 11 месяцев назад

@@jeremyjones8872 i dont get any engine light or codes , i had it serviced today and it made no diffrence so my next step is crank sensor as its getting really bad and struggling to start at times along with high fuel usage

@lepterfirefall 6 лет назад

hi.....I have a problem. I have a 2002 suzuki swift. i put it through a mot which it passed. i was told that the oil filter was leaking slightly so i asked them to do an oil change with new oil filter. about a week later, my car started playing up. it will start up in the morning but when i turn off the engine, the car wont start. it turns over but wont go. it died on me when i was driving, (close to home). after about half an hour...i try again and it starts. since the problems started soon after the mot and oil change, I checked the oil level and discovered the oil was 1 cm over the maximum on the dip stick. i drained the oil to just below the level. I changed the air filter and the plugs. this disnt solve the problem. I took the car back to the garage and said the oil wouldnt be the problem. he had the car over night. He sais there were no error codes, the sparking was fine and the fuel was coming through. he said it was probably the engine ignition module but wasnt sure. I didnt want to spend £100 on a probably so I picked up another one (second hand) but the problem was still there. the chances of 2 amplifiers being faulty sounds quite low to me. Is it likely that the crank position sensor is at fault here? there were no error codes at the garage but i read that in older cars, they can sometimes not register. any ideas?

@JuiceMyRandomness 8 лет назад

great quality blog but man i struggle with gears on my push bike! lol

@christopher_barr 8 лет назад

+JuiceMyRandomness Thanks Carl. It's all easy once you get into it. I learn best by doing so if I don't know how to do something I get stuck in and learn along the way... :-)

@JuiceMyRandomness 8 лет назад

best way to do it really! otherwise your sitting on your hands waiting for someone else to do it!

@CrazyCandyCrush 11 месяцев назад

Why need to remove the battery? Thanks

@qa7103 3 года назад

Good lad

@victoriawhyte5379 4 года назад

Good evening Chris. I am very excited about giving this a go myself as all the garages seem to take lots if cash but have still yet not fixed the problem. So I have a diagnostics tester thingy now and tonight it has come up with P0341. So may I please ask you to step in ( before I go ahead and cock this up ) and confirm that this is the problem. I have already had 4 diagnostic tests and 2 new cam sensors. I am willing to try this but could I have s bit more insight before I do. Thank you

@victoriawhyte5379 4 года назад

So you cant help me on this one? I think I'm getting there as my belt is very screachy too. Wish me luck

@christopher_barr 4 года назад

Hi Victoria, here is a very useful link with lots of relevant information: www.samarins.com/diagnose/p0341.html It’s worth checking the things in that article but I have also heard of unserviceable crankshaft sensors creating a spurious camshaft senso fault code. As the crank sensor is cheap and easy to replace you might want to put that onto your list of things to check / replace in your fault diagnosis & rectification. As with any fault finding, it’s a good idea to get as much information as you can to use as clues as to what the problem is and then make a list of things to check / replace starting with the easiest, quickest and cheapest things to go through first, before working down the list to the more complicated things. (I have seen people waste a lot of time & money trying to replace expensive components when something as simple as a bad connection or a blown fuse was the culprit). Time spent thinking and writing down possible causes and a priority list of how to go through the fault-finding process is always time well spent. Happy fixing! Chris

@victoriawhyte5379 4 года назад

Brilliant I will get to the bottom of this. Ta very muchly

@giastravelexperience4002 3 года назад

Do I need to reset or clear the fault code after i I changed the crankshaft sensor? Or no need?

@christopher_barr 3 года назад

Disconnect the battery (if you follow this video you will have done that anyway) and this resets the fault codes. Cheers, Chris

@gwynmorris7199 3 года назад

top tip...

@christopher_barr 3 года назад

👍

@jessamosqueza3649 3 года назад

I started having problem few days ago when my car doesn't start specially when the engine is hot and the speedometer went to zero and stop working. I took it and have it diagnostics at a car dealer after the local auto shop miss up there diagnostics. I took the car to my mechanics because the car dealer is charging me $400 something for just replacing the sensor. I start researching myself and happen came across your RU-vid. I thank you the info and learning from you. I wish my Papa was still alive because he was an old fashion chief mechanic in a Logging Company. He knows the problem right away by just listening to the sound of the engine =_)

@christopher_barr 3 года назад

Good luck with your repair Jessa. I’m sorry to hear you lost your father, it sounds like he was a great man. They will always live on in our hearts...

@TyTowriss 3 года назад

I assume no worry that oil comes pouring out? The old sensor had oil on it when you pulled it. Is there any need to 1st drain the oil to change the sensor?

@estebanrobles4234 7 месяцев назад

I was wondering the same thing.🤦🏼

@bekimkadriu1636 Год назад

Hi Chris, I have problem with my opel astra h 1.7 cdti, when engine is hot engine stop and I have to wait 15-30 min to turn on again. So there are 2 or more sensor and this one you have make a video which one needs to replace? Thank you for video and answer. Have a great day.

@bekimkadriu1636 Год назад

Thank you very much for this video again really helpful 😊

@gravitystormgaming6836 3 месяца назад

@@bekimkadriu1636 which one was it? i have the same problem with my astra h 1.3 cdti which one did you replace? help me

@praneetachand9738 3 года назад

Need help, My Toyota brobox has problem of getting off when I press speed on packed

@dammitmandy1166 5 лет назад

Could u come over and do it for me. I’m just across the pond, a few miles in ☺️. It was such a good video but I’m still lost. The mechanics at my local shop can’t fix anything but a bill.

@Iknowyoumadnow Год назад

Sure boo I got you 💪🏾😏

@matthewash1200 6 лет назад

Hi there could you tell me please where the crankshaft sensor is on a 2006 Peugeot 407 2.0 hdi? Thanks

@christopher_barr 6 лет назад

www.peugeotforums.com/forums/407-41/2005-2-0hdi-crankshaft-position-sensor-81673/index2.html Hope this helps, Chris 👍

@matthewash1200 6 лет назад

Thankyou very much

@christopher_barr 6 лет назад

👍

@welcometube4164 4 года назад

Nice

@gasciotti 3 года назад

very good video. My Fiat Stilo Diesel unfortunately has tthe crankshaft sensor default and won't start to get to my garden. Dead. I'm afraid I must call assistance , impossible to reach probable seat in the street. I suscribed. Thank you Chris

@christopher_barr 3 года назад

My pleasure, benvenuto a bordo! Ho un altro canale di RU-vid con la mia moglie (italiana) e la nostra bimba https:ru-vid.com :-) In bocca al lupo per la macchina! Cheers, Chris 👍

@mrodriguez5259 3 года назад

Excelent

@christopher_barr 3 года назад

👍

@jaroslavkubacak3089 2 года назад

Ive changed this sensor but i forgot click the connector to this metal holder, so i unscrew the sensor for the second time and get it to metal holder and i forgot disconnect battery. Is it problem ? First time i disconnect the negative on battery.

@nikhilashok4549 6 лет назад

My car has a broken electrical connector can you please help me?

@marieruiz1814 5 лет назад

How long does it normally take to replace the whole thing? like 10 mins?

@christopher_barr 4 года назад

10 minutes-ish for a mechanic with everything ready and the car up on a ramp. More like 30 - 60 mins for a home DIYer...

@ramongonzalez9497 7 лет назад

boy that battery changed colors i think it over heated at the end lmao 😂

@christopher_barr 7 лет назад

Yes Ramon, it got so hot it turned orange :-)

@Mr26464 2 года назад

Hey Chris, hate to be a pest. But I cannot find my crankshaft sensor on my astra mk4 2.0 dti. It isnt in the location in this video. My mk4 1.7 VAN has it in this location. Could you please give me advice, I urgently need to change my sensor ASAP and I have the stuff. Just no accurate location.

@craigelton2880 Месяц назад

4:29 hi were is the cam shaft sencor on a 3.0 v6 1999 mercury sable

@pollyheenan4283 5 лет назад

Hello I don't really want to get under my car.....just in case it falls on top.donyp u think I could do it from above ...thank you 😀

@christopher_barr 5 лет назад

It depends on the car - some you can, some you can't. If you do go under then use jackstands so the car can't fall on you. Happy fixing! 👍

@BluzFan Год назад

This was great BUT what about relearning the new sensor?

@Jerespi 5 лет назад

Is draining the oil necessary while doing this?

@christopher_barr 5 лет назад

No 👍

@nicholascruise7729 Год назад

Woah a video feed my actual car don't see that everyday

@Msleelee9487 7 лет назад

i changed out both camshaft sensors because it came up for one then the other side then the crankshaft sensor code came up changed it out and still the engine light come back on

@htatesil4192 5 лет назад

Clear the code

@trailboss78 5 лет назад

Happen to know were its located on a 2013 accent GLS...?

@mica122213 5 лет назад

i do

@georgehamilton2463 3 месяца назад

How do you find a crank shaft sensor on a mini 2021.Please

@rudypavon4362 7 лет назад

Where can i find the crank position sensor on nissan verda?? Please help me.

@christopher_barr 6 лет назад

www.autocodes.com/qa/?qa=blob&qa_blobid=7313916364777423796 Happy fixing! Cheers, Chris 👍

@Seek147. 4 года назад

How much should this cost to get done by a mechanic?

@elvis2172 2 года назад

Hello can somone help me. I bought signum 3.2 v6. When engine is cold it works pefektly but when it is at working temperature it idle poor or jump when i push a throttle. And sometimes whants to stop

@Ashley-vn3my 6 лет назад

Thank u

@christopher_barr 6 лет назад

My pleasure 👍

@Ashley-vn3my 6 лет назад

Christopher Barr - Random Chris Unfortunately after replacing the sensor last night my rsx 04 acura still wont start. Ive replaced the starter, the battery, the starter relay fuse and the crankshaft position sensor. It still acts like its a dead battery. Nothing, no sound when u try to start the car. Tried rocking it in neutral, tried everything. Any advice?

@Ashley-vn3my 6 лет назад

Auto place sold me the wrong starter oops lol nevermind thanks again should have the right starter in this afternoon

@dani_huni7022 5 месяцев назад

Vauxhall insignia has this code P2617 - Crankshaft Position Signal Output Circuit/Open Can I buy crankshaft sensor and replace ? Car isn’t starting

@TruthOfYahuahMinistry 4 года назад

How to change a crankshaft p0336 on a Cadillac cts

@fafa9218 4 года назад

Crankshaft and cramshaft are the same sensor???? I mean can I use the same sensor???? O need to buy cramshaft sensor and camshaft? Because I have the problem P0335 on mi sentra 04, in the work shop told me the sensor are the same!